Relative porosity in aluminium and in aluminium alloys

T. S. Shih, L. W. Huang, Y. J. Chen

研究成果: 雜誌貢獻期刊論文同行評審

24 引文 斯高帕斯(Scopus)

摘要

Pores are readily formed in aluminium alloy castings. Density and porosity area fraction are often used quantitatively to evaluate the quality of aluminium alloy castings. This study used the relative porosity, the ratio (dc - dr)/dc, where dc is the density of the chilled sample and dr is the density of the reduced-pressure test sample, to evaluate the quality of aluminium and Al-6Si and Al-13Si alloys. The bursting of degassing bubbles on the free surface of the melt brought debris of oxide particles into the melt, which were eventually trapped in the castings after pouring. These particles were accompanied with air pockets and/or engulfed by bubbles, resulting in pores shown on the sections of poured castings.

原文???core.languages.en_GB???
頁(從 - 到)301-308
頁數8
期刊International Journal of Cast Metals Research
18
發行號5
DOIs
出版狀態已出版 - 2005

指紋

深入研究「Relative porosity in aluminium and in aluminium alloys」主題。共同形成了獨特的指紋。

引用此