Optimization of heat transfer during the directional solidification process of 1600 kg silicon feedstock

Chieh Hu, Jyh Chen Chen, Thi Hoai Thu Nguyen, Zhi Zhong Hou, Chun Hung Chen, Yen Hao Huang, Michael Yang

研究成果: 雜誌貢獻期刊論文同行評審

18 引文 斯高帕斯(Scopus)


In this study, the power ratio between the top and side heaters and the moving velocity of the side insulation are designed to control the shape of the crystal-melt interface during the growth process of a 1600 kg multi-crystalline silicon ingot. The power ratio and insulation gap are adjusted to ensure solidification of the melt. To ensure that the crystal-melt interface is slightly convex in relation to the melt during the entire solidification process, the power ratio should be augmented gradually in the initial stages while being held to a constant value in the middle stages. Initially the gap between the side and the bottom insulation is kept small to reduce thermal stress inside the seed crystals. However, the growth rate will be slow in the early stages of the solidification process. Therefore, the movement of the side insulation is fast in the initial stages but slower in the middle stages. In the later stages, the side insulation gap is fixed. With these modifications, the convexity of the crystal-melt interface in relation to the melt can be maintained during the growth process with an approximately 41% reduction in the thermal stress inside the growing ingot and an 80% reduction in dislocation density along the center line of the ingot compared with the original case.

頁(從 - 到)70-77
期刊Journal of Crystal Growth
出版狀態已出版 - 15 2月 2018


深入研究「Optimization of heat transfer during the directional solidification process of 1600 kg silicon feedstock」主題。共同形成了獨特的指紋。