Modeling of Lumped-Element Coplanar-Stripline Low-Pass Filter

Shau Gang Mao; Hwann Kaeo Chiou; Chun Hsiung Chen

doi:10.1109/75.661142

Modeling of Lumped-Element Coplanar-Stripline Low-Pass Filter

Shau Gang Mao, Hwann Kaeo Chiou, Chun Hsiung Chen

電機工程學系

研究成果: 雜誌貢獻 › 期刊論文 › 同行評審

18 引文斯高帕斯（Scopus）

摘要

A novel coplanar-stripline low-pass filter using lumped-element spiral inductors and interdigital capacitors is proposed. To characterize this filter, a simple CAD equivalent-circuit model is established. The elements of this model, which consist of transmission lines, resistances, inductances, and capacitances, can all be handled by the closed-form formulas; hence this model is suitable for CAD application. In this study, results based on CAD model, full-wave simulation, and measurement are presented, and good agreement among these results validates the usefulness of the proposed CAD model. Being compact and uniplanar in structure, this coplanar-stripline low-pass filter is useful in the implementation of monolithic microwave integrated circuits (MMIC's).

原文	???core.languages.en_GB???
頁（從 - 到）	141-143
頁數	3
期刊	IEEE Microwave and Guided Wave Letters
卷	8
發行號	3
DOIs	https://doi.org/10.1109/75.661142
出版狀態	已出版 - 3月 1998

存取文件

10.1109/75.661142

引用此

@article{a71225364b8549dcb0f42ed3ac215e81,

title = "Modeling of Lumped-Element Coplanar-Stripline Low-Pass Filter",

abstract = "A novel coplanar-stripline low-pass filter using lumped-element spiral inductors and interdigital capacitors is proposed. To characterize this filter, a simple CAD equivalent-circuit model is established. The elements of this model, which consist of transmission lines, resistances, inductances, and capacitances, can all be handled by the closed-form formulas; hence this model is suitable for CAD application. In this study, results based on CAD model, full-wave simulation, and measurement are presented, and good agreement among these results validates the usefulness of the proposed CAD model. Being compact and uniplanar in structure, this coplanar-stripline low-pass filter is useful in the implementation of monolithic microwave integrated circuits (MMIC's).",

keywords = "CAD model, Coplanar-stripline filter",

author = "Mao, {Shau Gang} and Chiou, {Hwann Kaeo} and Chen, {Chun Hsiung}",

note = "Funding Information: Manuscript received November 4, 1997. This work was supported by the National Science Council of Taiwan, R.O.C., under Grant NSC 87-2213-E-002-056. The authors are with the Department of Electrical Engineering, National Taiwan University, Taipei, Taiwan 10617, R.O.C. Publisher Item Identifier S 1051-8207(98)02056-X.",

year = "1998",

month = mar,

doi = "10.1109/75.661142",

language = "???core.languages.en_GB???",

volume = "8",

pages = "141--143",

journal = "IEEE Microwave and Guided Wave Letters",

issn = "1051-8207",

number = "3",

}

TY - JOUR

T1 - Modeling of Lumped-Element Coplanar-Stripline Low-Pass Filter

AU - Mao, Shau Gang

AU - Chiou, Hwann Kaeo

AU - Chen, Chun Hsiung

N1 - Funding Information: Manuscript received November 4, 1997. This work was supported by the National Science Council of Taiwan, R.O.C., under Grant NSC 87-2213-E-002-056. The authors are with the Department of Electrical Engineering, National Taiwan University, Taipei, Taiwan 10617, R.O.C. Publisher Item Identifier S 1051-8207(98)02056-X.

PY - 1998/3

Y1 - 1998/3

N2 - A novel coplanar-stripline low-pass filter using lumped-element spiral inductors and interdigital capacitors is proposed. To characterize this filter, a simple CAD equivalent-circuit model is established. The elements of this model, which consist of transmission lines, resistances, inductances, and capacitances, can all be handled by the closed-form formulas; hence this model is suitable for CAD application. In this study, results based on CAD model, full-wave simulation, and measurement are presented, and good agreement among these results validates the usefulness of the proposed CAD model. Being compact and uniplanar in structure, this coplanar-stripline low-pass filter is useful in the implementation of monolithic microwave integrated circuits (MMIC's).

AB - A novel coplanar-stripline low-pass filter using lumped-element spiral inductors and interdigital capacitors is proposed. To characterize this filter, a simple CAD equivalent-circuit model is established. The elements of this model, which consist of transmission lines, resistances, inductances, and capacitances, can all be handled by the closed-form formulas; hence this model is suitable for CAD application. In this study, results based on CAD model, full-wave simulation, and measurement are presented, and good agreement among these results validates the usefulness of the proposed CAD model. Being compact and uniplanar in structure, this coplanar-stripline low-pass filter is useful in the implementation of monolithic microwave integrated circuits (MMIC's).

KW - CAD model

KW - Coplanar-stripline filter

UR - http://www.scopus.com/inward/record.url?scp=0032022686&partnerID=8YFLogxK

U2 - 10.1109/75.661142

DO - 10.1109/75.661142

M3 - 期刊論文

AN - SCOPUS:0032022686

SN - 1051-8207

VL - 8

SP - 141

EP - 143

JO - IEEE Microwave and Guided Wave Letters

JF - IEEE Microwave and Guided Wave Letters

IS - 3

ER -

Modeling of Lumped-Element Coplanar-Stripline Low-Pass Filter

摘要

存取文件

指紋

引用此