LED Die-Bonded on the Ag/Cu Substrate by a Sn-BiZn-Sn Bonding System

Y. K. Tang; Y. C. Hsu; E. J. Lin; Y. J. Hu; C. Y. Liu

doi:10.1007/s11664-016-4885-7

LED Die-Bonded on the Ag/Cu Substrate by a Sn-BiZn-Sn Bonding System

Y. K. Tang, Y. C. Hsu, E. J. Lin, Y. J. Hu, C. Y. Liu

化學工程與材料工程學系

研究成果: 雜誌貢獻 › 期刊論文 › 同行評審

1 引文斯高帕斯（Scopus）

摘要

In this study, light emitting diode (LED) chips were die-bonded on a Ag/Cu substrate by a Sn-BixZn-Sn bonding system. A high die-bonding strength is successfully achieved by using a Sn-BixZn-Sn ternary system. At the bonding interface, there is observed a Bi-segregation phenomenon. This Bi-segregation phenomenon solves the problems of the brittle layer-type Bi at the joint interface. Our shear test results show that the bonding interface with Bi-segregation enhances the shear strength of the LED die-bonding joints. The Bi-0.3Zn and Bi-0.5Zn die-bonding cases have the best shear strength among all die-bonding systems. In addition, we investigate the atomic depth profile of the deposited Bi-xZn layer by evaporating Bi-xZn E-gun alloy sources. The initial Zn content of the deposited Bi-Zn alloy layers are much higher than the average Zn content in the deposited Bi-Zn layers.

原文	???core.languages.en_GB???
頁（從 - 到）	6171-6176
頁數	6
期刊	Journal of Electronic Materials
卷	45
發行號	12
DOIs	https://doi.org/10.1007/s11664-016-4885-7
出版狀態	已出版 - 1 12月 2016

存取文件

10.1007/s11664-016-4885-7

引用此

@article{e4dd49123af9477aa6b24fa341f61376,

title = "LED Die-Bonded on the Ag/Cu Substrate by a Sn-BiZn-Sn Bonding System",

abstract = "In this study, light emitting diode (LED) chips were die-bonded on a Ag/Cu substrate by a Sn-BixZn-Sn bonding system. A high die-bonding strength is successfully achieved by using a Sn-BixZn-Sn ternary system. At the bonding interface, there is observed a Bi-segregation phenomenon. This Bi-segregation phenomenon solves the problems of the brittle layer-type Bi at the joint interface. Our shear test results show that the bonding interface with Bi-segregation enhances the shear strength of the LED die-bonding joints. The Bi-0.3Zn and Bi-0.5Zn die-bonding cases have the best shear strength among all die-bonding systems. In addition, we investigate the atomic depth profile of the deposited Bi-xZn layer by evaporating Bi-xZn E-gun alloy sources. The initial Zn content of the deposited Bi-Zn alloy layers are much higher than the average Zn content in the deposited Bi-Zn layers.",

keywords = "die strength, Die-attachment, lead-free solder, partial pressure, Sn-Bi-Zn solder",

author = "Tang, \{Y. K.\} and Hsu, \{Y. C.\} and Lin, \{E. J.\} and Hu, \{Y. J.\} and Liu, \{C. Y.\}",

note = "Publisher Copyright: {\textcopyright} 2016, The Minerals, Metals \& Materials Society.",

year = "2016",

month = dec,

day = "1",

doi = "10.1007/s11664-016-4885-7",

language = "???core.languages.en\_GB???",

volume = "45",

pages = "6171--6176",

journal = "Journal of Electronic Materials",

issn = "0361-5235",

number = "12",

}

TY - JOUR

T1 - LED Die-Bonded on the Ag/Cu Substrate by a Sn-BiZn-Sn Bonding System

AU - Tang, Y. K.

AU - Hsu, Y. C.

AU - Lin, E. J.

AU - Hu, Y. J.

AU - Liu, C. Y.

PY - 2016/12/1

Y1 - 2016/12/1

N2 - In this study, light emitting diode (LED) chips were die-bonded on a Ag/Cu substrate by a Sn-BixZn-Sn bonding system. A high die-bonding strength is successfully achieved by using a Sn-BixZn-Sn ternary system. At the bonding interface, there is observed a Bi-segregation phenomenon. This Bi-segregation phenomenon solves the problems of the brittle layer-type Bi at the joint interface. Our shear test results show that the bonding interface with Bi-segregation enhances the shear strength of the LED die-bonding joints. The Bi-0.3Zn and Bi-0.5Zn die-bonding cases have the best shear strength among all die-bonding systems. In addition, we investigate the atomic depth profile of the deposited Bi-xZn layer by evaporating Bi-xZn E-gun alloy sources. The initial Zn content of the deposited Bi-Zn alloy layers are much higher than the average Zn content in the deposited Bi-Zn layers.

AB - In this study, light emitting diode (LED) chips were die-bonded on a Ag/Cu substrate by a Sn-BixZn-Sn bonding system. A high die-bonding strength is successfully achieved by using a Sn-BixZn-Sn ternary system. At the bonding interface, there is observed a Bi-segregation phenomenon. This Bi-segregation phenomenon solves the problems of the brittle layer-type Bi at the joint interface. Our shear test results show that the bonding interface with Bi-segregation enhances the shear strength of the LED die-bonding joints. The Bi-0.3Zn and Bi-0.5Zn die-bonding cases have the best shear strength among all die-bonding systems. In addition, we investigate the atomic depth profile of the deposited Bi-xZn layer by evaporating Bi-xZn E-gun alloy sources. The initial Zn content of the deposited Bi-Zn alloy layers are much higher than the average Zn content in the deposited Bi-Zn layers.

KW - die strength

KW - Die-attachment

KW - lead-free solder

KW - partial pressure

KW - Sn-Bi-Zn solder

UR - https://www.scopus.com/pages/publications/84984656903

U2 - 10.1007/s11664-016-4885-7

DO - 10.1007/s11664-016-4885-7

M3 - 期刊論文

AN - SCOPUS:84984656903

SN - 0361-5235

VL - 45

SP - 6171

EP - 6176

JO - Journal of Electronic Materials

JF - Journal of Electronic Materials

IS - 12

ER -

LED Die-Bonded on the Ag/Cu Substrate by a Sn-BiZn-Sn Bonding System

摘要

存取文件

指紋

引用此