LED backlight module by a lightguide-diffusive component with tetrahedron reflector array

Jang Zern Tsai, Rong Seng Chang, Tung Yen Li, Thomas Chiang Chuang

研究成果: 雜誌貢獻期刊論文同行評審

10 引文 斯高帕斯(Scopus)

摘要

In our previous work, IEEE/OSA Journal of Display Technology, February 2012, we examined the luminance and uniformity characteristics of a newly invented secondary optical lens with a wide emission angle called a lightguide-diffusive component. The lightguide-diffusive component is designed for thin direct LED backlighting applications. The LED backlight module is composed of at least an LED light source, a secondary lightguide-diffusive component with a micro-structure reflective bottom surface, and a flexible printed circuit (FPC) for LED lighting without a brightness-enhanced film (BEF). Through this lightguide-diffusive component, the emission profile of a single LED is modified to provide better illumination and more uniformity. In this work, the micro-structure reflective bottom is redesigned to be shaped like a Tetrahedron Reflector Structure Array instead of a triangle cylinder structured array, resulting in a more uniform spatial light energy distribution on the emission plane of the LED backlight. The simulation results show an increase in the uniformity ratio with the new design from 72% to 76%, a 4% improvement, the angle of the luminous intensity is increased from 98 deg to 112 deg, a 14 deg improvement, a decrease in the luminance is from 9024 nits to 8551 nits, an impairment of 5%, and a decrease in the volume of the micro-structure reflector from 1.154 mm 3 to 0.767 mm 3, a 33.5% volume reduction (cost saving).

原文???core.languages.en_GB???
文章編號6189809
頁(從 - 到)321-328
頁數8
期刊IEEE/OSA Journal of Display Technology
8
發行號6
DOIs
出版狀態已出版 - 2012

指紋

深入研究「LED backlight module by a lightguide-diffusive component with tetrahedron reflector array」主題。共同形成了獨特的指紋。

引用此