Implementation of an Object-Grasping Robot Arm Using Stereo Vision Measurement and Fuzzy Control

Jun Wei Chang, Rong Jyue Wang, Wen June Wang, Cheng Hao Huang

研究成果: 雜誌貢獻期刊論文同行評審

18 引文 斯高帕斯(Scopus)

摘要

In this paper, a method using a stereo vision device and fuzzy control to guide a robot arm to grasp a target object is proposed. The robot arm has five degrees of freedom including a gripper and four joints. The stereo vision device located beside the arm captures images of the target and the gripper. Image processing techniques such as color space transformation, morphologic operation, and 3-D position measurement are used to identify the target object and the gripper from the captured images and estimate their relative positions. Based on the estimated positions of the gripper and the target, the gripper can approach and grasp the target using inverse kinematics. However, since the robot arm's accuracy of movement may be affected by gearbox backlash or hardware uncertainty, the gripper might not approach the desired position with precision using only inverse kinematics. Therefore, a fuzzy compensation method is added to correct any position errors between the gripper and target such that the gripper can grasp the target. Using the proposed method, the stereo vision device can not only locate the target object but also trace the position of the robot arm until the target object is grasped. Finally, some experiments are conducted to demonstrate successful implementation of the proposed method on the robot arm control.

原文???core.languages.en_GB???
頁(從 - 到)193-205
頁數13
期刊International Journal of Fuzzy Systems
17
發行號2
DOIs
出版狀態已出版 - 29 6月 2015

指紋

深入研究「Implementation of an Object-Grasping Robot Arm Using Stereo Vision Measurement and Fuzzy Control」主題。共同形成了獨特的指紋。

引用此