Hydrodemetalation of Residue Oil over CoMo/Alumina-Aluminum Phosphate Catalysts in a Trickle Bed Reactor

Yu Wen Chen, Wen Chang Hsu

研究成果: 雜誌貢獻期刊論文同行評審

31 引文 斯高帕斯(Scopus)

摘要

A series of alumina-aluminum phosphates (AAP) was prepared by a coprecipitation method. These materials were used as a support of CoMo hydrodemetalation (HDM) catalysts. The samples were characterized by X-ray diffraction, BET surface area, and mercury penetration pore volume measurement. Hydrodemetalation of Kuwait atmospheric tower bottom (ATB) residuum over the sulfided catalysts was carried out in a cocurrent down-flow trickle bed reactor at 663 K and 7.6 MPa. The hydrogen flow rate was kept constant at 300 mL(STP)/min and the ATP flow rate at 0.5 mL/min. A second-order rate equation fits reaction data. The apparent activation energies for dinickelation, devanadization, and demetalation are around 24 kcal/g-mol. All catalysts showed the higher activities than the conventional alumina-supported catalyst. The catalyst with Al/P atomic ratio of 8 demonstrates the highest HDM activity and the lowest deactivation. The higher the acid amount, the higher the deactivation of the catalyst. The high HDM activities of the CoMo/AAP catalysts can be rationalized on the presence of phosphorus. On the one hand, it can increase the Co-Mo-S groups on the surface and hydrogenation capabilities. On the other hand, it can enhance the acidities and cracking abilities of the catalysts.

原文???core.languages.en_GB???
頁(從 - 到)2526-2532
頁數7
期刊Industrial and Engineering Chemistry Research
36
發行號7
DOIs
出版狀態已出版 - 7月 1997

指紋

深入研究「Hydrodemetalation of Residue Oil over CoMo/Alumina-Aluminum Phosphate Catalysts in a Trickle Bed Reactor」主題。共同形成了獨特的指紋。

引用此