Friction drilling of austenitic stainless steel by uncoated and PVD AlCrN- and TiAlN-coated tungsten carbide tools

Shin Min Lee, Han Ming Chow, Fuang Yuan Huang, Biing Hwa Yan

研究成果: 雜誌貢獻期刊論文同行評審

87 引文 斯高帕斯(Scopus)

摘要

Friction drilling utilizes the heat generated from the friction between the tool and the thin workpiece to form a bush for fixtures such as screw threads in plastic deformation process. This process produces no chip, shortens the time required for hole-making and incurs less tool wear, thus lengthening the service life of the drill. In this study, tungsten carbide drills with and without coating were employed to make holes in AISI 304 stainless steel, which is known to have high ductility, low thermal conductivity and great hardness. TiAIN and AlCrN were coated onto the drill surface by physical vapor deposition (PVD). Performance of coated and uncoated cutting tools was examined for drillings made under different spindle speeds. Changes in relationship between drill surface temperature, tool wear and axial thrust force during machining were also explored. Experimental results reveal that lubricating effect of the coating and low thermal conductivity of AlCrN caused AlCrN-coated drill to produce the highest surface temperature but the lowest axial thrust force with the least tool wear. However, the difference in performance between coated and uncoated drills diminished with increase in number of holes drilled. Crown

原文???core.languages.en_GB???
頁(從 - 到)81-88
頁數8
期刊International Journal of Machine Tools and Manufacture
49
發行號1
DOIs
出版狀態已出版 - 1月 2009

指紋

深入研究「Friction drilling of austenitic stainless steel by uncoated and PVD AlCrN- and TiAlN-coated tungsten carbide tools」主題。共同形成了獨特的指紋。

引用此