EFFECT OF ELECTRON BEAM WELDING ON FATIGUE CRACK GROWTH RATE IN AISI 4130 STEEL

Ji‐Liang ‐L Doong, Jing‐Ming ‐M Chi, Jiun‐Ren ‐R Hwang

研究成果: 雜誌貢獻期刊論文同行評審

4 引文 斯高帕斯(Scopus)

摘要

Abstract— The purpose of this study is to investigate the effect of electron beam welding parameters on fatigue crack growth rate in AISI 4130 steel. The welding method was carried out by using nonoscillation and oscillation electron beam patterns. In nonoscillation welding, the welding speed, was varied; in oscillation welding just the oscillation pattern and the oscillation frequency were varied. After welding, X‐ray inspection, metallography, fatigue crack growth tests and scanning electron microscopy were employed to characterize these specimens. From the results, the weld centerline solidification structure transforms from a longitudinal raft structure to an interlocked structure with increasing welding speed, and the fatigue crack growth rate increases slightly. The transverse oscillation pattern provides a lower fatigue crack growth rate than the longitudinal oscillation pattern. The higher oscillation frequency gives a lower fatigue crack growth resistence for the longitudinal oscillation pattern, but the opposite is the case for the transverse oscillation pattern.

原文???core.languages.en_GB???
頁(從 - 到)253-261
頁數9
期刊Fatigue and Fracture of Engineering Materials and Structures
13
發行號3
DOIs
出版狀態已出版 - 5月 1990

指紋

深入研究「EFFECT OF ELECTRON BEAM WELDING ON FATIGUE CRACK GROWTH RATE IN AISI 4130 STEEL」主題。共同形成了獨特的指紋。

引用此