Accelerating dynamic peak power analysis using an essential-signal-based methodology

Che Hua Shih; Chia Chih Yen; Shen Tien Lin; Hermes Lin; Jing Yang Jou

doi:10.1109/VDAT.2011.5783596

Accelerating dynamic peak power analysis using an essential-signal-based methodology

Che Hua Shih, Chia Chih Yen, Shen Tien Lin, Hermes Lin, Jing Yang Jou

電機工程學系

研究成果: 書貢獻/報告類型 › 會議論文篇章 › 同行評審

1 引文斯高帕斯（Scopus）

摘要

Accurate peak power measurement requires detailed switching and delay information for each signal over the entire simulation. Performing a full signal dump and power calculation for a long simulation run usually spends a large amount of time and disk space. In this paper, we propose an Essential-signal- based methodology which only performs power analysis over a small subset of the original simulation but still acquires the true peak power value. Experimental results show that the proposed methodology significantly decreases both time (about 18 X speedup) and disk space usage (about 87% reduction) against the traditional power analysis flow.

原文	???core.languages.en_GB???
主出版物標題	Proceedings of 2011 International Symposium on VLSI Design, Automation and Test, VLSI-DAT 2011
頁面	140-144
頁數	5
DOIs	https://doi.org/10.1109/VDAT.2011.5783596
出版狀態	已出版 - 2011
事件	2011 International Symposium on VLSI Design, Automation and Test, VLSI-DAT 2011 - Hsinchu, Taiwan 持續時間: 25 4月 2011 → 28 4月 2011

出版系列

名字	Proceedings of 2011 International Symposium on VLSI Design, Automation and Test, VLSI-DAT 2011

???event.eventtypes.event.conference???

???event.eventtypes.event.conference???	2011 International Symposium on VLSI Design, Automation and Test, VLSI-DAT 2011
國家/地區	Taiwan
城市	Hsinchu
期間	25/04/11 → 28/04/11

存取文件

10.1109/VDAT.2011.5783596

引用此

Shih, C. H., Yen, C. C., Lin, S. T., Lin, H., & Jou, J. Y. (2011). Accelerating dynamic peak power analysis using an essential-signal-based methodology. 於 Proceedings of 2011 International Symposium on VLSI Design, Automation and Test, VLSI-DAT 2011 (頁 140-144). 文章 5783596 (Proceedings of 2011 International Symposium on VLSI Design, Automation and Test, VLSI-DAT 2011). https://doi.org/10.1109/VDAT.2011.5783596

@inproceedings{f30b844ebefd4451a80d6e22b21b2131,

title = "Accelerating dynamic peak power analysis using an essential-signal-based methodology",

abstract = "Accurate peak power measurement requires detailed switching and delay information for each signal over the entire simulation. Performing a full signal dump and power calculation for a long simulation run usually spends a large amount of time and disk space. In this paper, we propose an Essential-signal- based methodology which only performs power analysis over a small subset of the original simulation but still acquires the true peak power value. Experimental results show that the proposed methodology significantly decreases both time (about 18 X speedup) and disk space usage (about 87% reduction) against the traditional power analysis flow.",

author = "Shih, {Che Hua} and Yen, {Chia Chih} and Lin, {Shen Tien} and Hermes Lin and Jou, {Jing Yang}",

year = "2011",

doi = "10.1109/VDAT.2011.5783596",

language = "???core.languages.en_GB???",

isbn = "9781424484997",

series = "Proceedings of 2011 International Symposium on VLSI Design, Automation and Test, VLSI-DAT 2011",

pages = "140--144",

booktitle = "Proceedings of 2011 International Symposium on VLSI Design, Automation and Test, VLSI-DAT 2011",

note = "2011 International Symposium on VLSI Design, Automation and Test, VLSI-DAT 2011 ; Conference date: 25-04-2011 Through 28-04-2011",

}

Shih, CH, Yen, CC, Lin, ST, Lin, H & Jou, JY 2011, Accelerating dynamic peak power analysis using an essential-signal-based methodology. 於 Proceedings of 2011 International Symposium on VLSI Design, Automation and Test, VLSI-DAT 2011., 5783596, Proceedings of 2011 International Symposium on VLSI Design, Automation and Test, VLSI-DAT 2011, 頁 140-144, 2011 International Symposium on VLSI Design, Automation and Test, VLSI-DAT 2011, Hsinchu, Taiwan, 25/04/11. https://doi.org/10.1109/VDAT.2011.5783596

Accelerating dynamic peak power analysis using an essential-signal-based methodology. / Shih, Che Hua; Yen, Chia Chih; Lin, Shen Tien 等.
Proceedings of 2011 International Symposium on VLSI Design, Automation and Test, VLSI-DAT 2011. 2011. p. 140-144 5783596 (Proceedings of 2011 International Symposium on VLSI Design, Automation and Test, VLSI-DAT 2011).

研究成果: 書貢獻/報告類型 › 會議論文篇章 › 同行評審

TY - GEN

T1 - Accelerating dynamic peak power analysis using an essential-signal-based methodology

AU - Shih, Che Hua

AU - Yen, Chia Chih

AU - Lin, Shen Tien

AU - Lin, Hermes

AU - Jou, Jing Yang

PY - 2011

Y1 - 2011

N2 - Accurate peak power measurement requires detailed switching and delay information for each signal over the entire simulation. Performing a full signal dump and power calculation for a long simulation run usually spends a large amount of time and disk space. In this paper, we propose an Essential-signal- based methodology which only performs power analysis over a small subset of the original simulation but still acquires the true peak power value. Experimental results show that the proposed methodology significantly decreases both time (about 18 X speedup) and disk space usage (about 87% reduction) against the traditional power analysis flow.

AB - Accurate peak power measurement requires detailed switching and delay information for each signal over the entire simulation. Performing a full signal dump and power calculation for a long simulation run usually spends a large amount of time and disk space. In this paper, we propose an Essential-signal- based methodology which only performs power analysis over a small subset of the original simulation but still acquires the true peak power value. Experimental results show that the proposed methodology significantly decreases both time (about 18 X speedup) and disk space usage (about 87% reduction) against the traditional power analysis flow.

UR - http://www.scopus.com/inward/record.url?scp=79959520332&partnerID=8YFLogxK

U2 - 10.1109/VDAT.2011.5783596

DO - 10.1109/VDAT.2011.5783596

M3 - 會議論文篇章

AN - SCOPUS:79959520332

SN - 9781424484997

T3 - Proceedings of 2011 International Symposium on VLSI Design, Automation and Test, VLSI-DAT 2011

SP - 140

EP - 144

BT - Proceedings of 2011 International Symposium on VLSI Design, Automation and Test, VLSI-DAT 2011

T2 - 2011 International Symposium on VLSI Design, Automation and Test, VLSI-DAT 2011

Y2 - 25 April 2011 through 28 April 2011

ER -

Shih CH, Yen CC, Lin ST, Lin H, Jou JY. Accelerating dynamic peak power analysis using an essential-signal-based methodology. 於 Proceedings of 2011 International Symposium on VLSI Design, Automation and Test, VLSI-DAT 2011. 2011. p. 140-144. 5783596. (Proceedings of 2011 International Symposium on VLSI Design, Automation and Test, VLSI-DAT 2011). doi: 10.1109/VDAT.2011.5783596

Accelerating dynamic peak power analysis using an essential-signal-based methodology

摘要

出版系列

???event.eventtypes.event.conference???

存取文件

指紋

引用此