A study on the inner wall spiral polishing with magnetic force

Wei Chan Chen, Biing Hwa Yan

研究成果: 書貢獻/報告類型會議論文篇章同行評審

1 引文 斯高帕斯(Scopus)


The spiral polishing mechanism in the present experiment employed a turning screw rod to drive the SiC and the steel grits. With a powerful magnet set around the workpiece interacting with the steel grits, the SiC abrasives were driven and then achieve the surface's polishing effects. The best parameters combination was discussed with the control of magnetic flux density, size and weight of SiC particles, weight of steel abrasives, viscosity of silicon oil, turning speed of spindle, as well as machining time and their influences on the surface roughness. The effects of each machining parameter on the appearance of workpiece surface were also studied. Based on the results of the experiment, with the increase of machining time, the fluidity of the abrasives becomes better, and thus higher quality of polishing surface could be expected after the process of precision spiral polishing. The results also showed that the best polishing surface was found when the magnet of magnetic flux density was controlled at 90mT, particle size at 12μm, 110g of SiC grams, 60 grams of polystyrene balls, silcon oil at 1000 mm2/s viscosity, and the screw revolution speed at 3500 rpm. The surface roughness was successfully improved from 0.9μm to 0.134μm.

主出版物標題Advanced Manufacturing Focusing on Multi-Disciplinary Technologies
出版狀態已出版 - 2012
事件4th International Conference on Advanced Manufacturing, ICAM 2012 - Jiaoxi, Taiwan
持續時間: 4 3月 20128 3月 2012


名字Advanced Materials Research


???event.eventtypes.event.conference???4th International Conference on Advanced Manufacturing, ICAM 2012


深入研究「A study on the inner wall spiral polishing with magnetic force」主題。共同形成了獨特的指紋。