A study on stainless steel mirror surface polishing by using the electrophoretic deposition method

Hai Ping Tsui, Biing Hwa Yan, Wei Te Wu, Sheng Tsai Hsu

研究成果: 雜誌貢獻期刊論文同行評審

15 引文 斯高帕斯(Scopus)

摘要

Polishing wheels with homogeneously organized micro abrasive grains, uniformly dispersed by electrophoretic deposition (EPD), can be applied in mirror-like polishing process. This work studies the characteristics of EPD and mechanical polishing when SUS316LVV is polished. Abrasive grains with blunt edges are easily ablated from the polishing wheel by friction during polishing. The polishing wheel can be continuously refreshed by adding new abrasives. A superior surface polishing quality can thus be obtained. The control parameters of the EPD polishing process include the working voltage, the rate of rotation of the polishing wheel, the polishing feed rate, the polishing time, the axial loading and the pH value of the electrolyte, etc. Experimental results indicate not only that SiC particles of size 0.9-1.5 μm were used in EPD polishing, but also that the initial roughness of a machined surface could be improved from 0.5 μm Ra to 0.02 μm in 8 min, yielding a mirror-like surface.

原文???core.languages.en_GB???
頁(從 - 到)1965-1970
頁數6
期刊International Journal of Machine Tools and Manufacture
47
發行號12-13
DOIs
出版狀態已出版 - 10月 2007

指紋

深入研究「A study on stainless steel mirror surface polishing by using the electrophoretic deposition method」主題。共同形成了獨特的指紋。

引用此