A new shared miniature cone penetrometer for centrifuge testing

T. Carey, A. Gavras, B. Kutter, S. K. Haigh, S. P.G. Madabhushi, M. Okamura, D. S. Kim, K. Ueda, W. Y. Hung, Y. G. Zhou, K. Liu, Y. M. Chen, M. Zeghal, T. Abdoun, S. Escoffier, M. Manzari

研究成果: 書貢獻/報告類型會議論文篇章同行評審

17 引文 斯高帕斯(Scopus)

摘要

Cone penetrometers (CPTs) are commonly used for characterising the soil properties of centrifuge models; CPT data is useful for interpretation and quality control. This paper describes the development and design of a new robust CPT device for centrifuge testing. The new device consists of a 6mm cone, an outer sleeve, and an inner rod that transmits cone tip forces to a load cell above the ground surface. The design eliminates the need for a custom submerged strain gauge bridge near the tip, significantly reducing cost.A direct comparison was performed between this CPT device and another similar device developed at the University of Cambridge. CPT’s were manufactured using the new design and then shipped to eight different centrifuge facilities, for quality control of similar experiments performed for LEAP (Liquefaction Experiments and Analysis Projects). All the centrifuge tests simulated a 4 m deep deposit of soil, all consisting of Ottawa F-65 sand with relative densities ranging between about 45 to 80%. The results obtained have been extremely valuable as an independent assessment of the density calculated from mass and volume measurements at different laboratories.

原文???core.languages.en_GB???
主出版物標題Physical Modelling in Geotechnics
編輯Andrew McNamara, Sam Divall, Richard Goodey, Neil Taylor, Sarah Stallebrass, Jignasha Panchal
發行者CRC Press/Balkema
頁面293-298
頁數6
ISBN(列印)9781138559752
DOIs
出版狀態已出版 - 2018
事件9th International Conference on Physical Modelling in Geotechnics, ICPMG 2018 - London, United Kingdom
持續時間: 17 7月 201820 7月 2018

出版系列

名字Physical Modelling in Geotechnics
1

???event.eventtypes.event.conference???

???event.eventtypes.event.conference???9th International Conference on Physical Modelling in Geotechnics, ICPMG 2018
國家/地區United Kingdom
城市London
期間17/07/1820/07/18

指紋

深入研究「A new shared miniature cone penetrometer for centrifuge testing」主題。共同形成了獨特的指紋。

引用此