Yiin-Kuen Fuh

2023

A 30 MeV-cyclotron-based quasi-monoenergetic neutron source

Chu, K. Y., Kuo, W. S., Lee, H. M. & Fuh, Y. K., 5月 2023, 於: Nuclear Engineering and Technology. 55, 5, p. 1559-1566 8 p.

研究成果: 雜誌貢獻 › 期刊論文 › 同行評審

開啟存取

1 引文斯高帕斯（Scopus）

Acoustic Performance of Stress Gradient-Induced Deflection of Triangular Unimorphic/Bimorphic Cantilevers for MEMS Applications

Yuan, N. H., Chen, C. C., Fuh, Y. K. & Li, T. T., 3月 2023, 於: Materials. 16, 5, 2129.

研究成果: 雜誌貢獻 › 期刊論文 › 同行評審

開啟存取

A multi-step deposited AlN films in a DC pulsed sputtering and film characteristics classification with principal component analysis of OES data

Chen, W. L., Zhou, W. Y., Yuan, N. H., Yang, S. S., Wang, P. J., Lo, H. H., Li, T. T. & Fuh, Y. K., 7月 2023, 於: International Journal of Advanced Manufacturing Technology. 127, 5-6, p. 2955-2967 13 p.

研究成果: 雜誌貢獻 › 期刊論文 › 同行評審

Effect of shell mold thickness and insulating wool pattern on internal porosity in investment casting of vortex flow meter

Tseng, H. W., Chen, T. Y. I., Kao, Y. C., Huang, C. F., Liu, Y. C., Lee, S. C., Wang, C. C., Chan, C. W. & Fuh, Y. K., 7月 2023, 於: International Journal of Advanced Manufacturing Technology. 127, 5-6, p. 2371-2385 15 p.

研究成果: 雜誌貢獻 › 期刊論文 › 同行評審

Impact of Pulse Parameters of a DC Power Generator on the Microstructural and Mechanical Properties of Sputtered AlN Film with In-Situ OES Data Analysis

Zhou, W. Y., Chen, H. F., Tseng, X. L., Lo, H. H., Wang, P. J., Jiang, M. Y., Fuh, Y. K. & Li, T. T., 4月 2023, 於: Materials. 16, 8, 3015.

研究成果: 雜誌貢獻 › 期刊論文 › 同行評審

開啟存取

1 引文斯高帕斯（Scopus）

Mobile Induction Heat Treatment of Large-Sized Spur Gear—The Effect of Scanning Speed and Air Gap on the Uniformity of Hardened Depth and Mechanical Properties

Saputro, I. E., Chen, C. P., Jheng, Y. S., Huang, H. C. & Fuh, Y. K., 3月 2023, 於: Steel Research International. 94, 3, 2200261.

研究成果: 雜誌貢獻 › 期刊論文 › 同行評審

Predicting residual stress of aluminum nitride thin-film by incorporating manifold learning and tree-based ensemble classifier

Chen, H. F., Yang, Y. P., Chen, W. L., Wang, P. J., Lai, W., Fuh, Y. K. & Li, T. T., 1 2月 2023, 於: Materials Chemistry and Physics. 295, 127070.

研究成果: 雜誌貢獻 › 期刊論文 › 同行評審

1 引文斯高帕斯（Scopus）

Preform design with increased materials utilization and processing map analysis for aluminum hot forging process

Fuh, Y. K., Shih, J. K., Saputro, I. E., Chen, C. P., Huang, C. F., Ku, H. Y. & Chan, C. W., 24 3月 2023, 於: Journal of Manufacturing Processes. 90, p. 14-27 14 p.

研究成果: 雜誌貢獻 › 期刊論文 › 同行評審

Self-Powered Fire Alarm System with Layer-by-layer Graphene Oxide/Chitosan Nanocoating of Flame-Retardant Nanofilms

Liu, C. H., Chen, C. C., Guo, Z. W., Fuh, Y. K. & Li, T. T., 10 11月 2023, 於: Advanced Materials Technologies. 8, 21, 2300914.

研究成果: 雜誌貢獻 › 期刊論文 › 同行評審

Vibration prediction and experimental validation of a rotary compressor based on multi-body dynamics

Wang, I. C., Wu, Y. R. & Fuh, Y. K., 2023, 於: Mechanics Based Design of Structures and Machines. 51, 8, p. 4547-4559 13 p.

研究成果: 雜誌貢獻 › 期刊論文 › 同行評審

1 引文斯高帕斯（Scopus）

2022

A Comparison and Analysis of Three Methods of Aluminum Crown Forgings in Processing Optimization

Chen, C. P., Su, H. Z., Shih, J. K., Huang, C. F., Ku, H. Y., Chan, C. W., Li, T. T. & Fuh, Y. K., 12月 2022, 於: Materials. 15, 23, 8400.

研究成果: 雜誌貢獻 › 期刊論文 › 同行評審

開啟存取

2 引文斯高帕斯（Scopus）

A hybrid sensor for motor tics recognition based on piezoelectric and triboelectric design and fabrication

Wang, J., Chen, C. C., Shie, C. Y., Li, T. T. & Fuh, Y. K., 1 8月 2022, 於: Sensors and Actuators, A: Physical. 342, 113622.

研究成果: 雜誌貢獻 › 期刊論文 › 同行評審

6 引文斯高帕斯（Scopus）

All directional nanogenerators (NGs) with a highly flexible and near field electrospun concentrically aligned nano/micro P(VDF-TrFE) fibers

Xu, M. H., Shie, C. Y., Chen, C. C., Kwan Kwan, Y., Lo, W. C., Chen, H. F., Lin, Y. H. & Fuh, Y. K., 11月 2022, 於: Microsystem Technologies. 28, 11, p. 2549-2560 12 p.

研究成果: 雜誌貢獻 › 期刊論文 › 同行評審

2 引文斯高帕斯（Scopus）

A novel dry processing technique to construct a high-performance superfine diamond grinding wheel with thermal and material characterizations

Huang, H. C., Ho, C. C., Fuh, Y. K. & Li, T. T., 10月 2022, 於: Journal of Manufacturing Processes. 82, p. 765-776 12 p.

研究成果: 雜誌貢獻 › 期刊論文 › 同行評審

Computer-Aided Engineering (CAE) Simulation for the Robust Gating System Design: Improved Process for Investment Casting Defects of 316L Stainless Steel Valve Housing

Kao, Y. C., Ho, M. H., Tseng, H. W., Huang, C. F., Lee, S. C., Chan, C. W. & Fuh, Y. K., 10月 2022, 於: International Journal of Metalcasting. 16, 4, p. 2014-2032 19 p.

研究成果: 雜誌貢獻 › 期刊論文 › 同行評審

3 引文斯高帕斯（Scopus）

Fabrication of copper powder hybrid supported fillers with interconnected 1D/2D/3D nanostructures for enhanced thermal interface materials properties

Wu, S. W., Chang, T. C., Lin, Y. H., Chen, H. F. & Fuh, Y. K., 7月 2022, 於: International Journal of Advanced Manufacturing Technology. 121, 5-6, p. 3453-3462 10 p.

研究成果: 雜誌貢獻 › 期刊論文 › 同行評審

1 引文斯高帕斯（Scopus）

Flexible and Self-Powered Thermal Sensor Based on Graphene-Modified Intumescent Flame-Retardant Coating with Hybridized Nanogenerators

Shie, C. Y., Chen, C. C., Chen, H. F., Lin, Y. H., Liu, C. H., Fuh, Y. K. & Li, T., 2022, (已被接受) 於: ACS Applied Nano Materials.

研究成果: 雜誌貢獻 › 期刊論文 › 同行評審

1 引文斯高帕斯（Scopus）

Numerical and Experimental Studies on the Load Characteristics of Geometric Interference of Steel-Aluminum Knurled Interference Fit

Chen, C. P., Ho, M., Li, T. T. & Fuh, Y. K., 12月 2022, 於: Metals. 12, 12, 2078.

研究成果: 雜誌貢獻 › 期刊論文 › 同行評審

開啟存取

Prediction of the Effect of Asymmetric Pouring Basin Geometry on Temperature, Internal Porosity in Tilt Casting Housing of Scroll Compressor

Kao, Y. C., Tseng, H. W., Ho, M. H., Liang, K. Y., Liu, Y. G., Yang, Y. B., Lee, C. H. & Fuh, Y. K., 4月 2022, 於: International Journal of Metalcasting. 16, 2, p. 613-621 9 p.

研究成果: 雜誌貢獻 › 期刊論文 › 同行評審

4 引文斯高帕斯（Scopus）

Residual stress classification of pulsed DC reactive sputtered aluminum nitride film via large-scale data analysis of optical emission spectroscopy

Lo, H. H., Chen, W. L., Wang, P. J., Lai, W., Fuh, Y. K. & Li, T. T., 4月 2022, 於: International Journal of Advanced Manufacturing Technology. 119, 11-12, p. 7449-7462 14 p.

研究成果: 雜誌貢獻 › 期刊論文 › 同行評審

4 引文斯高帕斯（Scopus）

Tiny Piezoelectric Multi-Layered Actuators with Application in a Compact Camera Module—Design, Fabrication, Assembling and Testing Issues

Lee, C. P., Tsai, M. C. & Fuh, Y. K., 12月 2022, 於: Micromachines. 13, 12, 2126.

研究成果: 雜誌貢獻 › 期刊論文 › 同行評審

開啟存取

2021

3D Stacked Near-Field Electrospun Nanoporous PVDF-TrFE Nanofibers as Self-Powered Smart Sensing in Gait Big Data Analytics

Lo, W. C., Chen, C. C. & Fuh, Y. K., 4月 2021, 於: Advanced Materials Technologies. 6, 4, 2000779.

研究成果: 雜誌貢獻 › 期刊論文 › 同行評審

16 引文斯高帕斯（Scopus）

Machine learning assisted classification of aluminum nitride thin film stress via in-situ optical emission spectroscopy data

Yang, Y. P., Lu, T. Y., Lo, H. H., Chen, W. L., Wang, P. J., Lai, W., Fuh, Y. K. & Li, T. T., 2 8月 2021, 於: Materials. 14, 16, 4445.

研究成果: 雜誌貢獻 › 期刊論文 › 同行評審

開啟存取

7 引文斯高帕斯（Scopus）

Minimizing film residual stress with in situ OES big data using principal component analysis of deposited AlN films by pulsed DC reactive sputtering

Lu, T. Y., Yang, Y. P., Lo, H. H., Wang, P. J., Lai, W., Fuh, Y. K. & Li, T. T., 6月 2021, 於: International Journal of Advanced Manufacturing Technology. 114, 7-8, p. 1975-1990 16 p.

研究成果: 雜誌貢獻 › 期刊論文 › 同行評審

4 引文斯高帕斯（Scopus）

Self-powered, hybrid, multifunctional sensor for a human biomechanical monitoring device

Lu, Y. H., Lo, H. H., Wang, J., Lee, T. H. & Fuh, Y. K., 2 1月 2021, 於: Applied Sciences (Switzerland). 11, 2, p. 1-12 12 p., 519.

研究成果: 雜誌貢獻 › 期刊論文 › 同行評審

開啟存取

4 引文斯高帕斯（Scopus）

Sheet-bulk metal forming of copper heat spreader with controllable deformation zone

Hsu, C. C., Wu, W. L., Su, H. Z. & Fuh, Y. K., 2021, 於: Journal of Materials Research and Technology. 12, p. 316-332 17 p.

研究成果: 雜誌貢獻 › 期刊論文 › 同行評審

開啟存取

3 引文斯高帕斯（Scopus）

2020

An investigation on deformation mechanism of non-standard gear teeth forming in the hot impression forging of multicore cable cutter

Hsu, C. C., Chiu, H. Y., Liao, C. C. & Fuh, Y. K., 6月 2020, 於: Journal of Manufacturing Processes. 54, p. 158-168 11 p.

研究成果: 雜誌貢獻 › 期刊論文 › 同行評審

4 引文斯高帕斯（Scopus）

A reduced percolation threshold of hybrid fillers of ball-milled exfoliated graphite nanoplatelets and AgNWs for enhanced thermal interface materials in high power electronics

Chang, T. C., Kwan, Y. K. & Fuh, Y. K., 15 6月 2020, 於: Composites Part B: Engineering. 191, 107954.

研究成果: 雜誌貢獻 › 期刊論文 › 同行評審

15 引文斯高帕斯（Scopus）

Biomimetic and porous nanofiber-based hybrid sensor for multifunctional pressure sensing and human gesture identification via deep learning method

Syu, M. H., Guan, Y. J., Lo, W. C. & Fuh, Y. K., 10月 2020, 於: Nano Energy. 76, 105029.

研究成果: 雜誌貢獻 › 期刊論文 › 同行評審

54 引文斯高帕斯（Scopus）

Evolution of a-Si:H to nc-Si:H transition of hydrogenated silicon films deposited by trichlorosilane using principle component analysis of optical emission spectroscopy

Wang, S. H., Chang, H. E., Lee, C. C., Fuh, Y. K. & Li, T. T., 15 1月 2020, 於: Materials Chemistry and Physics. 240, 122186.

研究成果: 雜誌貢獻 › 期刊論文 › 同行評審

12 引文斯高帕斯（Scopus）

Hybrid nano-textured nanogenerator and self-powered sensor for on-skin triggered biomechanical motions

Shu Fang, L., Tsai, C. Y., Xu, M. H., Wu, S. W., Lo, W. C., Lu, Y. H. & Fuh, Y. K., 23 1月 2020, 於: Nanotechnology. 31, 15, 155502.

研究成果: 雜誌貢獻 › 期刊論文 › 同行評審

20 引文斯高帕斯（Scopus）

Large-scale data principal component analysis of phase transition from a-Si:H to nc-Si:H using PECVD optical emission spectra

Kau, L. H., Huang, H. J., Chang, H. E., Hsieh, Y. L., Fuh, Y. K. & Li, T. T., 22 4月 2020, 於: Micro and Nano Letters. 15, 5, p. 323-326 4 p.

研究成果: 雜誌貢獻 › 期刊論文 › 同行評審

The suitability of ultrasonic and megasonic cleaning of nanoscale patterns in ammonia hydroxide solutions for particle removal and feature damage

Chu, C. L., Lu, T. Y. & Fuh, Y. K., 2020, 於: Semiconductor Science and Technology. 35, 4, 045001.

研究成果: 雜誌貢獻 › 期刊論文 › 同行評審

開啟存取

10 引文斯高帕斯（Scopus）

2019

3D printed acoustic metamaterials with microscale gaps as sound-absorbing mask for the patients of Tourette syndrome

Hsueh, C. W., Liao, C. C., Zhong, T. Y., Su, J. Z., Hsueh-Er, C. & Fuh, Y. K., 4 2月 2019, 於: Microsystem Technologies. 25, 2, p. 551-559 9 p.

研究成果: 雜誌貢獻 › 期刊論文 › 同行評審

4 引文斯高帕斯（Scopus）

A fully encapsulated piezoelectric-triboelectric hybrid nanogenerator for energy harvesting from biomechanical and environmental sources

Chen, C. Y., Tsai, C. Y., Xu, M. H., Wu, C. T., Huang, C. Y., Lee, T. H. & Fuh, Y. K., 6月 2019, 於: Express Polymer Letters. 13, 6, p. 533-542 10 p.

研究成果: 雜誌貢獻 › 期刊論文 › 同行評審

開啟存取

22 引文斯高帕斯（Scopus）

Correlation of impedance matching and optical emission spectroscopy during plasma-enhanced chemical vapor deposition of nanocrystalline silicon thin films

Kau, L. H., Huang, H. J., Chang, H. E., Hsieh, Y. L., Lee, C. C., Fuh, Y. K. & Li, T. T., 1 5月 2019, 於: Coatings. 9, 5, 305.

研究成果: 雜誌貢獻 › 期刊論文 › 同行評審

開啟存取

1 引文斯高帕斯（Scopus）

Deformation mechanism of forging tool for multi-stage forming of deep groove ball bearing

Liao, C. C., Hsu, C. C., Huang, J. H., Chen, W. C., Fuh, Y. K., Liao, C. A. & Chiu, H. Y., 1 3月 2019, 於: Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture. 233, 4, p. 1182-1195 14 p.

研究成果: 雜誌貢獻 › 期刊論文 › 同行評審

2 引文斯高帕斯（Scopus）

Large-scale data analysis of PECVD amorphous silicon interface passivation layer via the optical emission spectra for parameterized PCA

Huang, H. J., Kau, L. H., Wang, H. S., Hsieh, Y. L., Lee, C. C., Fuh, Y. K. & Li, T. T., 17 3月 2019, 於: International Journal of Advanced Manufacturing Technology. 101, 1-4, p. 329-337 9 p.

研究成果: 雜誌貢獻 › 期刊論文 › 同行評審

7 引文斯高帕斯（Scopus）

2018

A fully packaged self-powered sensor based on near-field electrospun arrays of poly(Vinylidene fluoride) nano/micro fibers

Fuh, Y. K., Li, S. C., Chen, C. Y. & Tsai, C. Y., 2月 2018, 於: Express Polymer Letters. 12, 2, p. 136-145 10 p.

研究成果: 雜誌貢獻 › 期刊論文 › 同行評審

開啟存取

22 引文斯高帕斯（Scopus）

Ball-milled dispersed network of graphene platelets as thermal interface materials for high-efficiency heat dissipation of electronic devices

Chang, T. C., Liao, C. A., Lin, Z. Y. & Fuh, Y. K., 1 4月 2018, 於: Journal of Micro/Nanolithography, MEMS, and MOEMS. 17, 2, 24001.

研究成果: 雜誌貢獻 › 期刊論文 › 同行評審

3 引文斯高帕斯（Scopus）

Ball-milled recycled lead-graphite pencils as highly stretchable and low-cost thermal-interface materials

Liao, C. A., Kwan, Y. K., Chang, T. C. & Fuh, Y. K., 20 7月 2018, 於: Polymers. 10, 7, 799.

研究成果: 雜誌貢獻 › 期刊論文 › 同行評審

開啟存取

7 引文斯高帕斯（Scopus）

Effects of Etching Variations on Ge/Si Channel Formation and Device Performance

Chen, J. L., Fuh, Y. K. & Chu, C. L., 2018, 於: Nanoscale Research Letters. 13, 226.

研究成果: 雜誌貢獻 › 期刊論文 › 同行評審

開啟存取

Gas forming of shallow rounded rectangular pan using aluminum alloy sheets

Liu, C. W., Chu, C. L., Wang, J. Y., Fuh, Y. K. & Lee, S., 1 7月 2018, 於: International Journal of Advanced Manufacturing Technology. 97, 5-8, p. 2469-2475 7 p.

研究成果: 雜誌貢獻 › 期刊論文 › 同行評審

4 引文斯高帕斯（Scopus）

Highly stretchable thermal interface materials with uniformly dispersed network of exfoliated graphite nanoplatelets via ball milled processing route

Chang, T. C., Liao, C. A., Lin, Z. Y. & Fuh, Y. K., 1 9月 2018, 於: Microsystem Technologies. 24, 9, p. 3667-3675 9 p.

研究成果: 雜誌貢獻 › 期刊論文 › 同行評審

3 引文斯高帕斯（Scopus）

Improved process stability on an extremely thin amorphous/crystalline silicon interface passivation layer by using predeposition on the chamber wall

Hsieh, Y. L., Tseng, C. L., Lee, C. C., Fuh, Y. K., Chang, J. Y., Lee, J. Y. & Li, T. T., 2018, 於: ECS Journal of Solid State Science and Technology. 7, 8, p. P355-P361

研究成果: 雜誌貢獻 › 期刊論文 › 同行評審

3 引文斯高帕斯（Scopus）

In situ plasma monitoring of PECVD nc-Si:H Films and the influence of dilution ratio on structural evolution

Hsieh, Y. L., Kau, L. H., Huang, H. J., Lee, C. C., Fuh, Y. K. & Li, T. T., 1 4月 2018, 於: Coatings. 8, 7, 238.

研究成果: 雜誌貢獻 › 期刊論文 › 同行評審

開啟存取

15 引文斯高帕斯（Scopus）

Joint strength of Ag–9Pd–9Ga brazed interconnect and anode-supported electrolyte for solid-oxide fuel cell applications

Chao, C. L., Chu, C. L., Fuh, Y. K., Hsu, R. Q., Lee, S. & Cheng, Y. N., 1 9月 2018, 於: Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications. 232, 9, p. 749-760 12 p.

研究成果: 雜誌貢獻 › 期刊論文 › 同行評審

1 引文斯高帕斯（Scopus）

Multiple vibrating plates of sound suppression mask for minimizing tics impulse acoustics of Tourette's patients

Liao, C. C., Hsueh, C. W., Zhong, T. Y., Hsu, C. C. & Fuh, Y. K., 1 1月 2018, 於: Applied Acoustics. 129, p. 27-35 9 p.

研究成果: 雜誌貢獻 › 期刊論文 › 同行評審

2 引文斯高帕斯（Scopus）

Near-field electrospun piezoelectric fibers as sound-sensing elements

Lee, T. H., Chen, C. Y., Tsai, C. Y. & Fuh, Y. K., 21 6月 2018, 於: Polymers. 10, 7, 692.

研究成果: 雜誌貢獻 › 期刊論文 › 同行評審

開啟存取

26 引文斯高帕斯（Scopus）

2017

A fast processing route of aspheric polydimethylsiloxane lenses array (APLA) and optical characterization for smartphone microscopy

Fuh, Y. K. & Lai, Z. H., 15 2月 2017, 於: Optics Communications. 385, p. 160-166 7 p.

研究成果: 雜誌貢獻 › 期刊論文 › 同行評審

10 引文斯高帕斯（Scopus）

傅 尹坤

研究成果

搜尋結果

傅尹坤