董 必正

研究成果

每年研究成果 1988 2002 2009 2012 2013 2023

• 122 期刊論文
• 13 會議論文篇章
• 1 評論/辯論
• 1 會議論文

每年研究成果

每年研究成果

搜尋結果

• 2023

  Formation of subsurface Cu-O-Si system through laser-induced plasma-assisted copper penetration for fabricating robust adhesive copper wire on glass substrate

  Wei, K., Lin, C. K., Tung, P. C., Ho, J. R. & Tsao, I. Y., 30 1月 2023, 於: Applied Surface Science. 609, 155149.

  研究成果: 雜誌貢獻 › 期刊論文 › 同行評審

  • Glass Substrate 100%
  • adhesives 99%
  • Plasmas 93%
  • Adhesives 91%
  • penetration 82%
• 2022

  A Hybrid PSO–GWO Fuzzy Logic Controller with a New Fuzzy Tuner

  Nguyen, D. T., Ho, J. R., Tung, P. C. & Lin, C. K., 4月 2022, 於: International Journal of Fuzzy Systems. 24, 3, p. 1586-1604 19 p.

  研究成果: 雜誌貢獻 › 期刊論文 › 同行評審

  • Fuzzy Logic Controller 100%
  • Hybrid Logic 89%
  • Tuners 76%
  • Fuzzy logic 50%
  • Particle Swarm Optimization 41%
  1 引文 斯高帕斯（Scopus）

• Controller Design for Unstable Time-Delay Systems with Unknown Transfer Functions

  Tsai, H. H., Fuh, C. C., Ho, J. R., Lin, C. K. & Tung, P. C., 1 2月 2022, 於: Mathematics. 10, 3, 431.

  研究成果: 雜誌貢獻 › 期刊論文 › 同行評審

  開啟存取

  • Controller Design 100%
  • Time-delay Systems 89%
  • Transfer Function 71%
  • Transient Response 67%
  • Unstable 59%
  1 引文 斯高帕斯（Scopus）

• Prediction and optimization of dross formation in laser cutting of electrical steel sheet in different environments

  Rohman, M. N., Ho, J. R., Tung, P. C., Lin, C. T. & Lin, C. K., 1 5月 2022, 於: Journal of Materials Research and Technology. 18, p. 1977-1990 14 p.

  研究成果: 雜誌貢獻 › 期刊論文 › 同行評審

  開啟存取

  • Laser Cutting 100%
  • Silicon steel 71%
  • Steel sheet 61%
  • Deep neural networks 55%
  • Lasers 43%
  3 引文 斯高帕斯（Scopus）

• Prediction and optimization of geometrical quality for pulsed laser cutting of non-oriented electrical steel sheet

  Rohman, M. N., Ho, J. R., Tung, P. C., Tsui, H. P. & Lin, C. K., 5月 2022, 於: Optics and Laser Technology. 149, 107847.

  研究成果: 雜誌貢獻 › 期刊論文 › 同行評審

  • Laser Cutting 100%
  • Pulsed lasers 79%
  • laser cutting 78%
  • Silicon steel 71%
  • Steel sheet 61%
  5 引文 斯高帕斯（Scopus）

• Tempering Effect on the Anisotropic Mechanical Properties of Selective Laser Melted 420 Stainless Steel

  Jiang, C. M., Ho, J. R., Tung, P. C. & Lin, C. K., 2022, (已被接受) 於: Journal of Materials Engineering and Performance.

  研究成果: 雜誌貢獻 › 期刊論文 › 同行評審

  • Tempering 100%
  • Selective laser melting 90%
  • Martensitic stainless steel 87%
  • Melting 61%
  • Lasers 54%
  1 引文 斯高帕斯（Scopus）
• 2021

  An improved real-time temperature control for pulsed laser cutting of non-oriented electrical steel

  Nguyen, D. T., Ho, J. R., Tung, P. C. & Lin, C. K., 4月 2021, 於: Optics and Laser Technology. 136, 106783.

  研究成果: 雜誌貢獻 › 期刊論文 › 同行評審

  • Laser Cutting 100%
  • Pulsed lasers 79%
  • laser cutting 78%
  • Silicon steel 71%
  • temperature control 68%
  8 引文 斯高帕斯（Scopus）

• Artificial intelligence-based modeling and optimization of heat-affected zone and magnetic property in pulsed laser cutting of thin nonoriented silicon steel

  Nguyen, T. H., Lin, C. K., Tung, P. C., Nguyen-Van, C. & Ho, J. R., 4月 2021, 於: International Journal of Advanced Manufacturing Technology. 113, 11-12, p. 3225-3240 16 p.

  研究成果: 雜誌貢獻 › 期刊論文 › 同行評審

  • Pulsed lasers 100%
  • Silicon steel 90%
  • Magnetic properties 88%
  • Heat affected zone 78%
  • Magnetic flux 68%
  8 引文 斯高帕斯（Scopus）

• Automatically tightening tiny screw using two images and positioning control

  Chen, S. Y., Ho, J. R., Tung, P. C. & Lin, C. K., 1 10月 2021, 於: Mathematics. 9, 19, 2521.

  研究成果: 雜誌貢獻 › 期刊論文 › 同行評審

  開啟存取

  • Positioning 100%
  • Manipulator 94%
  • Image Processing 40%
  • Human-machine Interface 24%
  • Bilateral Filter 23%

• Effects of laser spot size on the mechanical properties of aisi 420 stainless steel fabricated by selective laser melting

  Yang, X. H., Jiang, C. M., Ho, J. R., Tung, P. C. & Lin, C. K., 8月 2021, 於: Materials. 14, 16, 4593.

  研究成果: 雜誌貢獻 › 期刊論文 › 同行評審

  開啟存取

  • Selective laser melting 100%
  • Martensitic stainless steel 96%
  • stainless steels 70%
  • Melting 68%
  • melting 61%
  6 引文 斯高帕斯（Scopus）

• Formation of Bottom Conjugate Pair Grooves by Femtosecond Laser Grooving on Transparent Substrate

  Wei, K., Zhou, G. C., Huang, Y. J., Tung, P. C., Lin, C. K. & Ho, J. R., 15 3月 2021, 於: IEEE Photonics Technology Letters. 33, 6, p. 305-308 4 p., 9350609.

  研究成果: 雜誌貢獻 › 期刊論文 › 同行評審

  • Femtosecond lasers 100%
  • grooving 92%
  • grooves 64%
  • Substrates 45%
  • Laser Ablation 35%
  1 引文 斯高帕斯（Scopus）

• Prediction of kerf width in laser cutting of thin non-oriented electrical steel sheets using convolutional neural network

  Nguyen, D. T., Ho, J. R., Tung, P. C. & Lin, C. K., 9月 2021, 於: Mathematics. 9, 18, 2261.

  研究成果: 雜誌貢獻 › 期刊論文 › 同行評審

  開啟存取

  • Laser 100%
  • Neural Network Model 98%
  • Steel 94%
  • Neural Networks 74%
  • Prediction 63%
  3 引文 斯高帕斯（Scopus）
• 2020

  An extreme learning machine for predicting kerf waviness and heat affected zone in pulsed laser cutting of thin non-oriented silicon steel

  Nguyen, T. H., Lin, C. K., Tung, P. C., Nguyen-Van, C. & Ho, J. R., 1 11月 2020, 於: Optics and Lasers in Engineering. 134, 106244.

  研究成果: 雜誌貢獻 › 期刊論文 › 同行評審

  • Laser Cutting 100%
  • Pulsed lasers 79%
  • laser cutting 78%
  • heat affected zone 73%
  • machine learning 73%
  15 引文 斯高帕斯（Scopus）

• Effects of build direction on the mechanical properties of a martensitic stainless steel fabricated by selective laser melting

  Shen, L. C., Yang, X. H., Ho, J. R., Tung, P. C. & Lin, C. K., 2 11月 2020, 於: Materials. 13, 22, p. 1-18 18 p., 5142.

  研究成果: 雜誌貢獻 › 期刊論文 › 同行評審

  開啟存取

  • Selective laser melting 100%
  • Martensitic stainless steel 96%
  • Melting 68%
  • Residual stresses 51%
  • Mechanical properties 51%
  11 引文 斯高帕斯（Scopus）

• Investigation on the differential quadrature Fabry-Pérot interferometer with variable measurement mirrors

  Shih, Y. C., Tung, P. C., Jywe, W. Y., Chang, C. P., Shyu, L. H. & Hsieh, T. H., 9月 2020, 於: Applied Sciences (Switzerland). 10, 18, 6191.

  研究成果: 雜誌貢獻 › 期刊論文 › 同行評審

  開啟存取

  • Interferometers 100%
  • quadratures 84%
  • Displacement 66%
  • interferometers 65%
  • Error 60%
  2 引文 斯高帕斯（Scopus）

• Linear displacement calibration system integrated with a novel auto-alignment module for optical axes

  Shih, Y. C., Tung, P. C., Wang, Y. C., Shyu, L. H. & Manske, E., 1 5月 2020, 於: Sensors (Switzerland). 20, 9, 2462.

  研究成果: 雜誌貢獻 › 期刊論文 › 同行評審

  開啟存取

  • Calibration 100%
  • modules 79%
  • Displacement 78%
  • alignment 74%
  • Precision engineering 47%
  2 引文 斯高帕斯（Scopus）

• 工業機器人應用於手機微小螺絲自動鎖附之實現

  Lu, J. C., Tung, P. C. & Lee, A. C., 12月 2020, 於: Journal of the Chinese Society of Mechanical Engineers, Transactions of the Chinese Institute of Engineers, Series C/Chung-Kuo Chi Hsueh Kung Ch'eng Hsuebo Pao. 41, 6, p. 735-744 10 p.

  研究成果: 雜誌貢獻 › 期刊論文 › 同行評審

  • Manipulators 100%
  • Robots 73%
  • Industry 49%
  • Tuning 44%
  • CCD cameras 33%
• 2018

  Automatic calibration system for micro-displacement devices

  Shih, H. T., Wang, Y. C., Shyu, L. H., Tung, P. C., Chang, C. P., Jywe, W. Y. & Chen, J. H., 12 7月 2018, 於: Measurement Science and Technology. 29, 8, 084003.

  研究成果: 雜誌貢獻 › 期刊論文 › 同行評審

  • Transducer 100%
  • Calibration 90%
  • Transducers 79%
  • Hysteresis 75%
  • Interferometer 71%
  1 引文 斯高帕斯（Scopus）

• 低取樣頻率控制系統的振盪抑制

  Tung, P. C. & Yao, W. H., 1 6月 2018, 於: Journal of the Chinese Society of Mechanical Engineers, Transactions of the Chinese Institute of Engineers, Series C/Chung-Kuo Chi Hsueh Kung Ch'eng Hsuebo Pao. 39, 3, p. 303-309 7 p.

  研究成果: 雜誌貢獻 › 期刊論文 › 同行評審

  • Sampling 100%
  • Control systems 87%
  • Closed loop systems 44%
  • Controllers 38%
  • Closed loop control systems 29%

• 修正史密斯估測器使用週期干擾降低方法用於線性時延系統

  Tsai, M. H. & Tung, P. C., 1 12月 2018, 於: Journal of the Chinese Society of Mechanical Engineers, Transactions of the Chinese Institute of Engineers, Series C/Chung-Kuo Chi Hsueh Kung Ch'eng Hsuebo Pao. 39, 6, p. 555-563 9 p.

  研究成果: 雜誌貢獻 › 期刊論文 › 同行評審

  • Time delay 100%
  • Controllers 98%
  • Uncertainty 76%
  • Uncertain systems 68%
  • Linear systems 54%
• 2013

  Application of steganography and empirical mode decomposition in communications security

  Lu, K. Y., Hsu, W. T., Tung, P. C., Tseng, C. J., Huang, N. E. & Lin, S. L., 9月 2013, 於: Information (Japan). 16, 9 B, p. 7071-7078 8 p.

  研究成果: 雜誌貢獻 › 期刊論文 › 同行評審

  • Steganography 100%
  • Secure communication 93%
  • Decomposition 60%
  • Internet 57%
  • Image communication systems 54%
  1 引文 斯高帕斯（Scopus）

• Extraction and screening of knee joint vibroarthrographic signals using the empirical mode decomposition method

  Chen, J. C., Tung, P. C., Huang, S. F., Wu, S. W., Lin, S. L. & Tu, K. L., 2013, 於: International Journal of Innovative Computing, Information and Control. 9, 6, p. 2689-2700 12 p.

  研究成果: 雜誌貢獻 › 期刊論文 › 同行評審

  • Empirical Mode Decomposition 100%
  • Screening 68%
  • Decomposition Method 65%
  • Decomposition Techniques 49%
  • Decomposition 44%
  10 引文 斯高帕斯（Scopus）

• Fabry-Perot displacement interferometer for the measuring range up to 100 mm

  Chang, C. P., Tung, P. C., Shyu, L. H., Wang, Y. C. & Manske, E., 2013, 於: Measurement: Journal of the International Measurement Confederation. 46, 10, p. 4094-4099 6 p.

  研究成果: 雜誌貢獻 › 期刊論文 › 同行評審

  • Interferometers 100%
  • interferometers 65%
  • Michelson interferometers 56%
  • optical paths 47%
  • Environmental impact 30%
  17 引文 斯高帕斯（Scopus）

• Gravity compensation for an ilpmsm driver based on a robust uncertainty controller with system delay compensation

  Yao, W. H., Tung, P. C., Fuh, C. C. & Chou, F. C., 2013, 於: International Journal of Innovative Computing, Information and Control. 9, 1, p. 287-303 17 p.

  研究成果: 雜誌貢獻 › 期刊論文 › 同行評審

  • Driver 100%
  • Delay Systems 91%
  • Gravity 82%
  • Controller 72%
  • Permanent Magnet Synchronous Motor 69%

• Modified Fabry-Perot interferometer for displacement measurement in ultra large measuring range

  Chang, C. P., Tung, P. C., Shyu, L. H., Wang, Y. C. & Manske, E., 5月 2013, 於: Review of Scientific Instruments. 84, 5, 053105.

  研究成果: 雜誌貢獻 › 期刊論文 › 同行評審

  • Fabry-Perot interferometers 100%
  • Displacement measurement 78%
  • displacement measurement 73%
  • Interferometers 36%
  • Michelson interferometers 25%
  4 引文 斯高帕斯（Scopus）

• Multi-interferometric displacement measurement system with variable measurement mirrors

  Chang, C. P., Tung, P. C., Shyu, L. H., Wang, Y. C. & Manske, E., 10 6月 2013, 於: Applied Optics. 52, 17, p. 3902-3909 8 p.

  研究成果: 雜誌貢獻 › 期刊論文 › 同行評審

  • Displacement measurement 100%
  • displacement measurement 93%
  • Mirrors 77%
  • mirrors 54%
  • Interpolation 32%
  2 引文 斯高帕斯（Scopus）

• Suppression of hunting in an ILPMSM driver system using hunting compensator

  Yao, W. H., Tung, P. C., Fuh, C. C. & Chou, F. C., 2013, 於: IEEE Transactions on Industrial Electronics. 60, 7, p. 2586-2594 9 p., 6189385.

  研究成果: 雜誌貢獻 › 期刊論文 › 同行評審

  • Synchronous motors 100%
  • Permanent magnets 86%
  • Servomechanisms 55%
  • Motion control 51%
  • System stability 50%
  18 引文 斯高帕斯（Scopus）

• The Active Vibration Control of a Centrifugal Pendulum Vibration Absorber Using a Back-Propagation Neural Network

  Liang, C. H. & Tung, P. C., 2013, 於: International Journal of Innovative Computing, Information and Control. 9, 4, p. 1573-1592 20 p.

  研究成果: 雜誌貢獻 › 期刊論文 › 同行評審

  • Active Vibration Control 100%
  • Back-propagation Neural Network 87%
  • Absorber 73%
  • Learning Rate 69%
  • Pendulum 57%
  1 引文 斯高帕斯（Scopus）

• Total design of an FPGA-based brain-computer interface control hospital bed nursing system

  Shyu, K. K., Chiu, Y. J., Lee, P. L., Lee, M. H., Sie, J. J., Wu, C. H., Wu, Y. T. & Tung, P. C., 2013, 於: IEEE Transactions on Industrial Electronics. 60, 7, p. 2731-2739 9 p., 6193428.

  研究成果: 雜誌貢獻 › 期刊論文 › 同行評審

  • Hospital beds 100%
  • Bioelectric potentials 86%
  • Nursing 84%
  • Brain computer interface 77%
  • Field programmable gate arrays (FPGA) 55%
  49 引文 斯高帕斯（Scopus）
• 2012

  Application of ICA-EEMD to secure communications in chaotic systems

  Lin, S. L., Tung, P. C. & Huang, N. E., 4月 2012, 於: International Journal of Modern Physics C. 23, 4, 1250028.

  研究成果: 雜誌貢獻 › 期刊論文 › 同行評審

  • Secure Communication 100%
  • messages 76%
  • Chaotic systems 74%
  • Secure communication 71%
  • Chaotic System 71%
  3 引文 斯高帕斯（Scopus）

• A robust disturbance reduction scheme for linear small delay systems with disturbances of unknown frequencies

  Tsai, M. H. & Tung, P. C., 5月 2012, 於: ISA Transactions. 51, 3, p. 362-372 11 p.

  研究成果: 雜誌貢獻 › 期刊論文 › 同行評審

  • Delay Systems 100%
  • Disturbance 79%
  • disturbances 72%
  • Unknown 54%
  • Controller 33%
  9 引文 斯高帕斯（Scopus）

• Coalescence of the two secondary responses in coupled duffing equations

  Lai, T. Y., Tung, P. C. & Hsiao, Y. C., 6月 2012, 於: International Journal of Bifurcation and Chaos in Applied Sciences and Engineering. 22, 6, 1250149.

  研究成果: 雜誌貢獻 › 期刊論文 › 同行評審

  • Duffing Equation 100%
  • Coalescence 99%
  • Orbits 68%
  • Bifurcation (mathematics) 48%
  • Periodic Orbits 47%

• Extraction and screening of Knee joint Vibroarthrographic signals using the independent component analysis method

  Chen, J. C., Tung, P. C., Huang, S. F., Wu, S. W. & Lin, S. L., 2012, 於: International Journal of Innovative Computing, Information and Control. 8, 11, p. 7501-7518 18 p.

  研究成果: 雜誌貢獻 › 期刊論文 › 同行評審

  • Independent Component Analysis 100%
  • Screening 81%
  • Independent component analysis 80%
  • Vibration Signal 47%
  • Cartilage 39%
  3 引文 斯高帕斯（Scopus）

• Investigation on displacement measurements in the large measuring range by utilizing multibeam interference

  Shyu, L. H., Wang, Y. C., Chang, C. P., Tung, P. C. & Manske, E., 5月 2012, 於: Sensor Letters. 10, 5-6, p. 1109-1112 4 p.

  研究成果: 雜誌貢獻 › 期刊論文 › 同行評審

  • Displacement measurement 100%
  • Interferometers 94%
  • displacement measurement 93%
  • interferometers 61%
  • interference 51%
  4 引文 斯高帕斯（Scopus）

• Modified Smith predictor with a robust disturbance reduction scheme for linear systems with small time delays

  Tsai, M. H. & Tung, P. C., 9月 2012, 於: Expert Systems. 29, 4, p. 394-410 17 p.

  研究成果: 雜誌貢獻 › 期刊論文 › 同行評審

  • Smith Predictor 100%
  • Disturbance 52%
  • Time Delay 52%
  • Linear systems 49%
  • Time delay 45%
  8 引文 斯高帕斯（Scopus）
• 2011

  A robust uncertainty controller with system delay compensation for an ILPMSM system with unknown system parameters

  Yao, W. H., Tung, P. C., Fuh, C. C. & Chou, F. C., 10月 2011, 於: IEEE Transactions on Industrial Electronics. 58, 10, p. 4727-4735 9 p., 5699921.

  研究成果: 雜誌貢獻 › 期刊論文 › 同行評審

  • Synchronous motors 100%
  • Permanent magnets 86%
  • Compensation and Redress 75%
  • Uncertainty 61%
  • Controllers 53%
  12 引文 斯高帕斯（Scopus）

• Chaos synchronization in the presence of noise

  Chen, K. Y., Tung, P. C., Lin, S. L. & Tsai, M. T., 12月 2011, 於: International Journal of Modern Physics C. 22, 12, p. 1409-1418 10 p.

  研究成果: 雜誌貢獻 › 期刊論文 › 同行評審

  • Chaos Synchronization 100%
  • feedback control 75%
  • white noise 72%
  • Chaos theory 69%
  • chaos 62%
  6 引文 斯高帕斯（Scopus）

• Design of model-based unbalance compensator with fuzzy gain tuning mechanism for an active magnetic bearing system

  Tung, P. C., Tsai, M. T., Chen, K. Y., Fan, Y. H. & Chou, F. C., 15 9月 2011, 於: Expert Systems with Applications. 38, 10, p. 12861-12868 8 p.

  研究成果: 雜誌貢獻 › 期刊論文 › 同行評審

  • Magnetic bearings 100%
  • Shaft displacement 95%
  • Derivatives 67%
  • Tuning 63%
  • Rotors 39%
  28 引文 斯高帕斯（Scopus）

• Experimental evaluations of proportional-integral-derivative type fuzzy controllers with parameter adaptive methods for an active magnetic bearing system

  Tsai, M. T., Tung, P. C. & Chen, K. Y., 2月 2011, 於: Expert Systems. 28, 1, p. 5-18 14 p.

  研究成果: 雜誌貢獻 › 期刊論文 › 同行評審

  • Active Magnetic Bearing 100%
  • Fuzzy Controller 82%
  • Experimental Evaluation 75%
  • Magnetic bearings 64%
  • Adaptive Method 62%
  7 引文 斯高帕斯（Scopus）
• 2010

  A disturbance reduction scheme for linear small delay systems with modeling uncertainties

  Tsai, M. H. & Tung, P. C., 7月 2010, 於: Journal of Process Control. 20, 6, p. 777-786 10 p.

  研究成果: 雜誌貢獻 › 期刊論文 › 同行評審

  • Uncertainty Modeling 100%
  • Delay Systems 78%
  • Disturbance 62%
  • Artificial Neural Network 42%
  • Uncertainty 41%
  10 引文 斯高帕斯（Scopus）

• Application of genetic algorithms to active vibration control of a centrifugal pendulum vibration absorber

  Liang, C. H. & Tung, P. C., 1 6月 2010, 於: Proceedings of the Institution of Mechanical Engineers. Part I: Journal of Systems and Control Engineering. 224, 4, p. 329-338 10 p.

  研究成果: 雜誌貢獻 › 期刊論文 › 同行評審

  • Vibration control 100%
  • Pendulums 99%
  • Genetic algorithms 66%
  • Controllers 14%
  • Dynamic models 10%
  5 引文 斯高帕斯（Scopus）

• Development of an automatic arc welding system using an adaptive sliding mode control

  Wu, C. Y., Tung, P. C. & Fuh, C. C., 8月 2010, 於: Journal of Intelligent Manufacturing. 21, 4, p. 355-362 8 p.

  研究成果: 雜誌貢獻 › 期刊論文 › 同行評審

  開啟存取

  • Electric arc welding 100%
  • Sliding mode control 88%
  • Welding 71%
  • Control systems 41%
  • Electrodes 34%
  6 引文 斯高帕斯（Scopus）

• Shadow compensation based on facial symmetry and image average for robust face recognition

  Hsieh, P. C. & Tung, P. C., 8月 2010, 於: Neurocomputing. 73, 13-15, p. 2708-2717 10 p.

  研究成果: 雜誌貢獻 › 期刊論文 › 同行評審

  • Facial Recognition 100%
  • Face recognition 72%
  • Compensation and Redress 57%
  • Lighting 42%
  • Light sources 41%
  20 引文 斯高帕斯（Scopus）
• 2009

  A fuzzy neural network for the active vibration control of a centrifugal pendulum vibration absorber

  Liang, C. H. & Tung, P. C., 12月 2009, 於: International Journal of Modern Physics C. 20, 12, p. 1963-1979 17 p.

  研究成果: 雜誌貢獻 › 期刊論文 › 同行評審

  • Active Vibration Control 100%
  • Fuzzy Neural Network 78%
  • Absorber 73%
  • Fuzzy neural networks 57%
  • Pendulum 57%
  1 引文 斯高帕斯（Scopus）

• A new method for chaos control in communication systems

  Lin, S. L. & Tung, P. C., 15 12月 2009, 於: Chaos, Solitons and Fractals. 42, 5, p. 3234-3241 8 p.

  研究成果: 雜誌貢獻 › 期刊論文 › 同行評審

  • Chaos Control 100%
  • Communication Systems 86%
  • Independent component analysis 77%
  • Independent Component Analysis 71%
  • Chaos theory 70%
  20 引文 斯高帕斯（Scopus）

• A novel hybrid approach based on sub-pattern technique and whitened PCA for face recognition

  Hsieh, P. C. & Tung, P. C., 5月 2009, 於: Pattern Recognition. 42, 5, p. 978-984 7 p.

  研究成果: 雜誌貢獻 › 期刊論文 › 同行評審

  • Face recognition 100%
  • Principal component analysis 98%
  • Independent component analysis 27%
  56 引文 斯高帕斯（Scopus）

• A self-tuning fuzzy PID-type controller design for unbalance compensation in an active magnetic bearing

  Chen, K. Y., Tung, P. C., Tsai, M. T. & Fan, Y. H., 5月 2009, 於: Expert Systems with Applications. 36, 4, p. 8560-8570 11 p.

  研究成果: 雜誌貢獻 › 期刊論文 › 同行評審

  • Magnetic bearings 100%
  • Shaft displacement 71%
  • Derivatives 67%
  • Tuning 63%
  • Compensation and Redress 62%
  78 引文 斯高帕斯（Scopus）

• Data analysis using a combination of independent component analysis and empirical mode decomposition

  Lin, S. L., Tung, P. C. & Huang, N. E., 12 6月 2009, 於: Physical Review E - Statistical, Nonlinear, and Soft Matter Physics. 79, 6, 066705.

  研究成果: 雜誌貢獻 › 期刊論文 › 同行評審

  • Empirical Mode Decomposition 100%
  • Independent Component Analysis 83%
  • Data analysis 55%
  • decomposition 46%
  • Signal-to-noise Ratio 25%
  34 引文 斯高帕斯（Scopus）

• Design of a fuzzy gain scheduling controller having input saturation: A comparative study

  Huang, Y. W. & Tung, P. C., 12月 2009, 於: Journal of Marine Science and Technology (Taiwan). 17, 4, p. 249-256 8 p.

  研究成果: 雜誌貢獻 › 期刊論文 › 同行評審

  • comparative study 100%
  • saturation 79%
  • Scheduling 76%
  • Controllers 59%
  • Fuzzy systems 57%
  6 引文 斯高帕斯（Scopus）

• Robust disturbance rejection method for uncertain system with disturbances of unknown frequencies

  Chen, Y. D., Tung, P. C. & Fuh, C. C., 3月 2009, 於: Nonlinear Dynamics. 55, 4, p. 329-336 8 p.

  研究成果: 雜誌貢獻 › 期刊論文 › 同行評審

  • Rejection Method 100%
  • Disturbance Rejection 94%
  • Uncertain Systems 81%
  • Uncertain systems 74%
  • Disturbance rejection 71%
  4 引文 斯高帕斯（Scopus）