Jiing-Yih Lai

2022

Decomposition of protrusion features on thin-shell parts for mold flow analysis

Song, P. P., Putrayudanto, P., Wu, T. Y., Lai, J. Y., Tsai, Y. C., Wang, M. H. & Hsu, C. H., 2022, (已被接受) 於: Engineering with Computers.

研究成果: 雜誌貢獻 › 期刊論文 › 同行評審

Development of a Multicolor 3D Printer Using a Novel Filament Shifting Mechanism

Hai, V. N. T., Phu, S. N., Essomba, T. & Lai, J. Y., 6月 2022, 於: Inventions. 7, 2, 34.

研究成果: 雜誌貢獻 › 期刊論文 › 同行評審

開啟存取

Hybrid mesh generation for the thin shell of thin-shell plastic parts for mold flow analysis

Lai, J. Y., Wu, J. W., Song, P. P., Chou, T. Y., Tsai, Y. C. & Hsu, C. H., 12月 2022, 於: Engineering with Computers. 38, 6, p. 4895-4917 23 p.

研究成果: 雜誌貢獻 › 期刊論文 › 同行評審

1 引文斯高帕斯（Scopus）

2021

Recognition and classification of protrusion features on thin-wall parts for mold flow analysis

Lai, J. Y., Song, P. P., Hsiao, A. S., Tsai, Y. C. & Hsu, C. H., 4月 2021, 於: Engineering with Computers. 37, 2, p. 833-854 22 p.

研究成果: 雜誌貢獻 › 期刊論文 › 同行評審

3 引文斯高帕斯（Scopus）

Sanders classification of calcaneal fractures in CT images with deep learning and differential data augmentation techniques

Aghnia Farda, N., Lai, J. Y., Wang, J. C., Lee, P. Y., Liu, J. W. & Hsieh, I. H., 3月 2021, 於: Injury. 52, 3, p. 616-624 9 p.

研究成果: 雜誌貢獻 › 期刊論文 › 同行評審

18 引文斯高帕斯（Scopus）

2020

Automatic and improved camera information processing for a 3D photo- modelling system

Wu, T. C., Lai, J. Y., Wang, D. W., Liao, C. Y. & Lee, J. Y., 2020, 於: Computer-Aided Design and Applications. 17, 1, p. 124-137 14 p.

研究成果: 雜誌貢獻 › 期刊論文 › 同行評審

開啟存取

Automatic hole recognition and classification for a set of B-rep models representing an injection mold

Lai, J. Y., Song, P. P., Tsai, Y. C. & Hsu, C. H., 1 8月 2020, 於: International Journal of Mechanical Engineering and Robotics Research. 9, 8, p. 1189-1197 9 p.

研究成果: 雜誌貢獻 › 期刊論文 › 同行評審

開啟存取

Design analysis and modification of ribs and tubes on thin-wall parts for mold flow analysis

Lai, J. Y., Zhang, Z. W., Song, P. P., Hsu, C. H. & Tsai, Y. C., 2020, 於: Computer-Aided Design and Applications. 18, 3, p. 584-599 16 p.

研究成果: 雜誌貢獻 › 期刊論文 › 同行評審

Effect of fractal parameters on optical properties of cold rolled aluminum alloy strips with induced surface deflection: Simulations and experimental correlations

Mahmood, M. A., Tsai, T. Y., Hwu, Y. J., Lin, W. J., Liu, L. C., Lai, J. Y., Pan, J. W., Li, W. L. & Lin, J. F., 5月 2020, 於: Journal of Materials Processing Technology. 279, 116554.

研究成果: 雜誌貢獻 › 期刊論文 › 同行評審

7 引文斯高帕斯（Scopus）

Effects of roll pattern and reduction ratio on optical characteristics of A1008 cold–rolled steel specimens: analytical approach and experimental correlations

Mahmood, M. A., Han, C. F., Chu, H. Y., Sun, C. C., Wu, W. H., Lin, W. J., Liu, L. C., Lai, J. Y., Mihailescu, I. N. & Lin, J. F., 1 12月 2020, 於: International Journal of Advanced Manufacturing Technology. 111, 7-8, p. 2001-2020 20 p.

研究成果: 雜誌貢獻 › 期刊論文 › 同行評審

4 引文斯高帕斯（Scopus）

Recognition and simplification of holes in CAD models of an injection mold for mold flow analysis

Lai, J. Y., Song, P. P., Hsu, C. H. & Tsai, Y. C., 2020, 於: Computer-Aided Design and Applications. 17, 1, p. 88-107 20 p.

研究成果: 雜誌貢獻 › 期刊論文 › 同行評審

開啟存取

1 引文斯高帕斯（Scopus）

2019

Automatic recognition and suppression of holes on mold bases for finite element applications

Song, P. P., Lai, J. Y., Tsai, Y. C. & Hsu, C. H., 1 7月 2019, 於: Engineering with Computers. 35, 3, p. 925-944 20 p.

研究成果: 雜誌貢獻 › 期刊論文 › 同行評審

2 引文斯高帕斯（Scopus）

Deep learning and SURF for automated classification and detection of calcaneus fractures in CT images

Pranata, Y. D., Wang, K. C., Wang, J. C., Idram, I., Lai, J. Y., Liu, J. W. & Hsieh, I. H., 4月 2019, 於: Computer Methods and Programs in Biomedicine. 171, p. 27-37 11 p.

研究成果: 雜誌貢獻 › 期刊論文 › 同行評審

66 引文斯高帕斯（Scopus）

Development of Mesh-Defect Removal Algorithm to Enhance the Fitting of 3D-Printed Parts for Comminuted Bone Fractures

Idram, I., Bintara, R. D., Lai, J. Y., Essomba, T. & Lee, P. Y., 1 12月 2019, 於: Journal of Medical and Biological Engineering. 39, 6, p. 855-873 19 p.

研究成果: 雜誌貢獻 › 期刊論文 › 同行評審

開啟存取

6 引文斯高帕斯（Scopus）

Kinematic analysis and evaluation of a hybrid mechanism for computer assisted bone reduction surgery

Nguyen Phu, S., Essomba, T., Idram, I. & Lai, J. Y., 13 12月 2019, 於: Mechanical Sciences. 10, 2, p. 589-604 16 p.

研究成果: 雜誌貢獻 › 期刊論文 › 同行評審

開啟存取

6 引文斯高帕斯（Scopus）

REPOSITIONING BONE FRAGMENTS USING REGISTRATION OF PAIRED-POINTS AND ASSISTED-CONSTRAINTS IN VIRTUAL BONE REDUCTION SURGERY

Irwansyah, I., Lai, J. Y. & Lee, P. Y., 1 6月 2019, 於: Biomedical Engineering - Applications, Basis and Communications. 31, 3, 1950021.

研究成果: 雜誌貢獻 › 期刊論文 › 同行評審

2 引文斯高帕斯（Scopus）

2018

A high-resolution texture mapping technique for 3D textured model

Lai, J. Y., Wu, T. C., Phothong, W., Wang, D. W., Liao, C. Y. & Lee, J. Y., 12 11月 2018, 於: Applied Sciences (Switzerland). 8, 11, 2228.

研究成果: 雜誌貢獻 › 期刊論文 › 同行評審

開啟存取

10 引文斯高帕斯（Scopus）

Automatic recognition and decomposition of rib features in thin-shell parts for mold flow analysis

Lai, J. Y., Wang, M. H., Song, P. P., Hsu, C. H. & Tsai, Y. C., 1 10月 2018, 於: Engineering with Computers. 34, 4, p. 801-820 20 p.

研究成果: 雜誌貢獻 › 期刊論文 › 同行評審

3 引文斯高帕斯（Scopus）

Editable texture map generation and optimization technique for 3D visualization presentation

Wu, T. C., Lai, J. Y., Phothong, W., Wang, D. W., Liao, C. Y. & Lee, J. Y., 4 5月 2018, 於: Computer-Aided Design and Applications. 15, 3, p. 378-389 12 p.

研究成果: 雜誌貢獻 › 期刊論文 › 同行評審

開啟存取

3 引文斯高帕斯（Scopus）

Generation and quality improvement of 3D models from silhouettes of 2D images

Phothong, W., Wu, T. C., Yu, C. Y., Lai, J. Y., Wang, D. W. & Liao, C. Y., 3 4月 2018, 於: Journal of the Chinese Institute of Engineers, Transactions of the Chinese Institute of Engineers,Series A/Chung-kuo Kung Ch'eng Hsuch K'an. 41, 3, p. 216-228 13 p.

研究成果: 雜誌貢獻 › 期刊論文 › 同行評審

1 引文斯高帕斯（Scopus）

Quality improvement of 3D models reconstructed from silhouettes of multiple images

Phothong, W., Wu, T. C., Lai, J. Y., Yu, C. Y., Wang, D. W. & Liao, C. Y., 4 5月 2018, 於: Computer-Aided Design and Applications. 15, 3, p. 288-299 12 p.

研究成果: 雜誌貢獻 › 期刊論文 › 同行評審

開啟存取

5 引文斯高帕斯（Scopus）

Recognition and decomposition of rib features in thin-shell plastic parts for finite element analysis

Lai, J. Y., Wang, M. H., Song, P. P., Hsu, C. H. & Tsai, Y. C., 4 3月 2018, 於: Computer-Aided Design and Applications. 15, 2, p. 264-279 16 p.

研究成果: 雜誌貢獻 › 期刊論文 › 同行評審

開啟存取

8 引文斯高帕斯（Scopus）

2017

Boss recognition algorithm for application to finite element analysis

Wang, M. H., Lai, J. Y., Hsu, C. H., Tsai, Y. C. & Huang, C. Y., 7 6月 2017, 於: Computer-Aided Design and Applications. 14, 4, p. 450-463 14 p.

研究成果: 雜誌貢獻 › 期刊論文 › 同行評審

開啟存取

4 引文斯高帕斯（Scopus）

Fast and accurate triangular model generation for the shape-from-silhouette technique

Phothong, W., Wu, T. C., Lai, J. Y., Wang, D. W., Liao, C. Y. & Lee, J. Y., 7 6月 2017, 於: Computer-Aided Design and Applications. 14, 4, p. 436-449 14 p.

研究成果: 雜誌貢獻 › 期刊論文 › 同行評審

開啟存取

4 引文斯高帕斯（Scopus）

2016

Improving the injection molding of small optical elements by integrating reverse engineering and mold flow analysis

Lai, J. Y., Wen, Y. Y. & Liu, C. H., 2016, 於: ARPN Journal of Engineering and Applied Sciences. 11, 2, p. 867-872 6 p.

研究成果: 雜誌貢獻 › 期刊論文 › 同行評審

Recognition of depression and protrusion features on B-rep models based on virtual loops

Lai, J. Y., Wang, M. H., Chiu, Y. K., Hsu, C. H., Tsai, Y. C. & Huang, C. Y., 2 1月 2016, 於: Computer-Aided Design and Applications. 13, 1, p. 95-107 13 p.

研究成果: 雜誌貢獻 › 期刊論文 › 同行評審

開啟存取

8 引文斯高帕斯（Scopus）

Recognition of virtual loops on 3D CAD models based on the B-rep model

Lai, J. Y., Wang, M. H., You, Z. W., Chiu, Y. K., Hsu, C. H., Tsai, Y. C. & Huang, C. Y., 1 10月 2016, 於: Engineering with Computers. 32, 4, p. 593-606 14 p.

研究成果: 雜誌貢獻 › 期刊論文 › 同行評審

6 引文斯高帕斯（Scopus）

Small blend suppression from B-rep models in computer-aided engineering analysis

Lai, J. Y., Wong, C., Huynh, T. T., Wang, M. H., Hsu, C. H., Tsai, Y. C. & Huang, C. Y., 17 8月 2016, 於: Journal of the Chinese Institute of Engineers, Transactions of the Chinese Institute of Engineers,Series A/Chung-kuo Kung Ch'eng Hsuch K'an. 39, 6, p. 735-745 11 p.

研究成果: 雜誌貢獻 › 期刊論文 › 同行評審

5 引文斯高帕斯（Scopus）

2014

Computer-assisted fracture reduction and fixation simulation for pelvic fractures

Lee, P. Y., Lai, J. Y., Yu, S. A., Huang, C. Y., Hu, Y. S. & Feng, C. L., 2014, 於: Journal of Medical and Biological Engineering. 34, 4, p. 368-376 9 p.

研究成果: 雜誌貢獻 › 期刊論文 › 同行評審

14 引文斯高帕斯（Scopus）

2012

Automatic model-based roentgen stereophotogrammetric analysis (RSA) of total knee prostheses

Syu, C. B., Lai, J. Y., Chang, R. Y., Shih, K. S., Chen, K. J. & Lin, S. C., 3 1月 2012, 於: Journal of Biomechanics. 45, 1, p. 164-171 8 p.

研究成果: 雜誌貢獻 › 期刊論文 › 同行評審

5 引文斯高帕斯（Scopus）

Automatic reconstruction of B-spline surfaces with constrained boundaries

Lin, K. Y., Huang, C. Y., Lai, J. Y., Tsai, Y. C. & Ueng, W. D., 2月 2012, 於: Computers and Industrial Engineering. 62, 1, p. 226-244 19 p.

研究成果: 雜誌貢獻 › 期刊論文 › 同行評審

9 引文斯高帕斯（Scopus）

Improved execution efficiency of model-based roentgen stereophotogrammetric analysis: Simplification and segmentation of model meshes

Syu, C. B., Lin, S. C., Huang, C. Y., Lai, J. Y., Shih, K. S. & Chen, K. J., 12月 2012, 於: Computer Methods in Biomechanics and Biomedical Engineering. 15, 12, p. 1347-1357 11 p.

研究成果: 雜誌貢獻 › 期刊論文 › 同行評審

1 引文斯高帕斯（Scopus）

Improvement in the clinical practicability of roentgen stereophotogrammetric analysis (RSA): Free from the use of the dual X-ray equipment

Shih, K. S., Lee, C. H., Syu, C. B., Lai, J. Y., Chen, K. J. & Lin, S. C., 10月 2012, 於: Proceedings of the Institution of Mechanical Engineers, Part H: Journal of Engineering in Medicine. 226, 10, p. 766-775 10 p.

研究成果: 雜誌貢獻 › 期刊論文 › 同行評審

3 引文斯高帕斯（Scopus）

Meshing simulation and clearance evaluation of real screw rotors

Lai, J. Y., Huang, Y. C., Lin, F. Y. & Guo, Y. L., 10月 2012, 於: Journal of the Chinese Institute of Engineers, Transactions of the Chinese Institute of Engineers,Series A/Chung-kuo Kung Ch'eng Hsuch K'an. 35, 7, p. 887-900 14 p.

研究成果: 雜誌貢獻 › 期刊論文 › 同行評審

4 引文斯高帕斯（Scopus）

Virtual 3D planning of pelvic fracture reduction and implant placement

Lee, P. Y., Lai, J. Y., Hu, Y. S., Huang, C. Y., Tsai, Y. C. & Ueng, W. D., 6月 2012, 於: Biomedical Engineering - Applications, Basis and Communications. 24, 3, p. 245-262 18 p.

研究成果: 雜誌貢獻 › 期刊論文 › 同行評審

22 引文斯高帕斯（Scopus）

2011

Efficient segmentation algorithm for 3D bone models construction on medical images

Huang, C. Y., Luo, L. J., Lee, P. Y., Lai, J. Y., Wang, W. T. & Lin, S. C., 2011, 於: Journal of Medical and Biological Engineering. 31, 6, p. 375-386 12 p.

研究成果: 雜誌貢獻 › 期刊論文 › 同行評審

20 引文斯高帕斯（Scopus）

Simultaneous segmentation of bone regions using multiple-level threshold

Huang, C. Y., Lee, P. Y., Lai, J. Y., Luo, L. J., Tsai, Y. C. & Lin, S. C., 2011, 於: Computer-Aided Design and Applications. 8, 2, p. 269-288 20 p.

研究成果: 雜誌貢獻 › 期刊論文 › 同行評審

3 引文斯高帕斯（Scopus）

2010

A new registration method for three-dimensional knee nearthrosis model using two X-ray images

Lai, J. Y., Dai, W. L., Syu, C. B., Shih, K. S., Wang, W. T. & Lin, S. C., 2010, 於: Computer Methods in Biomechanics and Biomedical Engineering. 13, 2, p. 265-278 14 p.

研究成果: 雜誌貢獻 › 期刊論文 › 同行評審

6 引文斯高帕斯（Scopus）

A partial mesh replacement technique for design modification in rapid prototyping

Lai, H. C. & Lai, J. Y., 4月 2010, 於: Computers and Industrial Engineering. 58, 3, p. 468-487 20 p.

研究成果: 雜誌貢獻 › 期刊論文 › 同行評審

1 引文斯高帕斯（Scopus）

Automatic construction of quadrilateral network of curves from triangular meshes

Huang, C. Y., Lai, J. Y. & Lin, K. Y., 2月 2010, 於: Advances in Engineering Software. 41, 2, p. 388-400 13 p.

研究成果: 雜誌貢獻 › 期刊論文 › 同行評審

1 引文斯高帕斯（Scopus）

Semi-automatic feature point extraction using one seed point

Hsu, S. H. & Lai, J. Y., 11月 2010, 於: International Journal of Advanced Manufacturing Technology. 51, 1-4, p. 277-295 19 p.

研究成果: 雜誌貢獻 › 期刊論文 › 同行評審

3 引文斯高帕斯（Scopus）

Two-dimensional localisation and clearance evaluation of screw rotors

Huang, Y. C., Lai, J. Y., Lin, F. Y. & Guo, Y. L., 1月 2010, 於: International Journal of Computer Applications in Technology. 37, 1, p. 74-85 12 p.

研究成果: 雜誌貢獻 › 期刊論文 › 同行評審

4 引文斯高帕斯（Scopus）

2009

A nurbs curve interpolator with jerk-limited trajectory planning

Tseng, S. J., Lin, K. Y., Lai, J. Y. & Ueng, W. D., 2009, 於: Journal of the Chinese Institute of Engineers, Transactions of the Chinese Institute of Engineers,Series A/Chung-kuo Kung Ch'eng Hsuch K'an. 32, 2, p. 215-228 14 p.

研究成果: 雜誌貢獻 › 期刊論文 › 同行評審

9 引文斯高帕斯（Scopus）

Development of automatic surface reconstruction technique in reverse engineering

Tsai, Y. C., Huang, C. Y., Lin, K. Y., Lai, J. Y. & Ueng, W. D., 5月 2009, 於: International Journal of Advanced Manufacturing Technology. 42, 1-2, p. 152-167 16 p.

研究成果: 雜誌貢獻 › 期刊論文 › 同行評審

21 引文斯高帕斯（Scopus）

Development of feature segmentation algorithms for quadratic surfaces

Lai, H. C., Chang, Y. H. & Lai, J. Y., 10月 2009, 於: Advances in Engineering Software. 40, 10, p. 1011-1022 12 p.

研究成果: 雜誌貢獻 › 期刊論文 › 同行評審

11 引文斯高帕斯（Scopus）

Extraction of geodesic and feature lines on triangular meshes

Hsu, S. H. & Lai, J. Y., 6月 2009, 於: International Journal of Advanced Manufacturing Technology. 42, 9-10, p. 940-954 15 p.

研究成果: 雜誌貢獻 › 期刊論文 › 同行評審

13 引文斯高帕斯（Scopus）

2008

A fast error comparison method for massive STL data

Huang, Y. C. & Lai, J. Y., 12月 2008, 於: Advances in Engineering Software. 39, 12, p. 962-972 11 p.

研究成果: 雜誌貢獻 › 期刊論文 › 同行評審

5 引文斯高帕斯（Scopus）

CNC codes conversion from linear and circular paths to NURBS curves

Lin, K. Y., Ueng, W. D. & Lai, J. Y., 11月 2008, 於: International Journal of Advanced Manufacturing Technology. 39, 7-8, p. 760-773 14 p.

研究成果: 雜誌貢獻 › 期刊論文 › 同行評審

25 引文斯高帕斯（Scopus）

On the development of a parametric interpolator with confined chord error, feedrate, acceleration and jerk

Lai, J. Y., Lin, K. Y., Tseng, S. J. & Ueng, W. D., 4月 2008, 於: International Journal of Advanced Manufacturing Technology. 37, 1-2, p. 104-121 18 p.

研究成果: 雜誌貢獻 › 期刊論文 › 同行評審

81 引文斯高帕斯（Scopus）

2007

An extended surface fitting algorithm for random data

Chen, K. J., Lai, J. Y. & Ueng, W. D., 2007, 於: Journal of the Chinese Institute of Engineers, Transactions of the Chinese Institute of Engineers,Series A/Chung-kuo Kung Ch'eng Hsuch K'an. 30, 5, p. 863-876 14 p.

研究成果: 雜誌貢獻 › 期刊論文 › 同行評審

3 引文斯高帕斯（Scopus）

賴 景義

研究成果

搜尋結果

賴景義