顏 炳華

研究成果

每年研究成果 1984 2000 2007 2010 2011 2019

• 98 期刊論文
• 6 會議論文篇章
• 3 會議論文

每年研究成果

每年研究成果

搜尋結果

• 2005

  Examination of wire electrical discharge machining of Al₂O ₃p/6061Al composites

  Hwa Yan, B., Tsai, H. C., Yuan Huang, F. & Chorng Lee, L., 3月 2005, 於: International Journal of Machine Tools and Manufacture. 45, 3, p. 251-259 9 p.

  研究成果: 雜誌貢獻 › 期刊論文 › 同行評審

  • Electric discharge machining 100%
  • Wire 63%
  • Machining 58%
  • Composite materials 49%
  • Surface roughness 30%
  146 引文 斯高帕斯（Scopus）

• Fracture strength analysis of micro WC-shaft manufactured by micro-electro-discharge machining

  Huang, S. H., Huang, F. Y. & Yan, B. H., 7月 2005, 於: International Journal of Advanced Manufacturing Technology. 26, 1-2, p. 68-77 10 p.

  研究成果: 雜誌貢獻 › 期刊論文 › 同行評審

  • Electric discharge machining 100%
  • Fracture toughness 76%
  • Surface roughness 70%
  • Cracks 16%
  • Stress concentration 10%
  21 引文 斯高帕斯（Scopus）

• Improvement of surface finish on SKD steel using electro-discharge machining with aluminum and surfactant added dielectric

  Wu, K. L., Yan, B. H., Huang, F. Y. & Chen, S. C., 8月 2005, 於: International Journal of Machine Tools and Manufacture. 45, 10, p. 1195-1201 7 p.

  研究成果: 雜誌貢獻 › 期刊論文 › 同行評審

  • Electric discharge machining 100%
  • Surface active agents 93%
  • Aluminum 65%
  • Powders 57%
  • Steel 49%
  161 引文 斯高帕斯（Scopus）

• The effect in EDM of a dielectric of a urea solution in water on modifying the surface of titanium

  Yan, B. H., Tsai, H. C. & Huang, F. Y., 2月 2005, 於: International Journal of Machine Tools and Manufacture. 45, 2, p. 194-200 7 p.

  研究成果: 雜誌貢獻 › 期刊論文 › 同行評審

  • Urea 100%
  • Electric discharge machining 95%
  • Titanium 78%
  • Machining 64%
  • Surface treatment 56%
  202 引文 斯高帕斯（Scopus）

• The feasibility study on a fabricated micro slit die using micro EDM

  Wang, A. C., Yan, B. H., Tang, Y. X. & Huang, F. Y., 1月 2005, 於: International Journal of Advanced Manufacturing Technology. 25, 1-2, p. 10-16 7 p.

  研究成果: 雜誌貢獻 › 期刊論文 › 同行評審

  • Electric discharge machining 100%
  • Heat sinks 92%
  • Electrodes 65%
  • Debris 45%
  • Tungsten carbide 26%
  9 引文 斯高帕斯（Scopus）
• 2004

  Improving electrical discharge machined surfaces using magnetic abrasive finishing

  Yan, B. H., Chang, G. W., Chang, J. H. & Hsu, R. T., 2004, 於: Machining Science and Technology. 8, 1, p. 103-118 16 p.

  研究成果: 雜誌貢獻 › 期刊論文 › 同行評審

  • Surface discharges 100%
  • Abrasive 82%
  • Abrasives 68%
  • Machining 52%
  • Electric discharge machining 47%
  40 引文 斯高帕斯（Scopus）
• 2003

  EDM performance of Cr/Cu-based composite electrodes

  Tsai, H. C., Yan, B. H. & Huang, F. Y., 2月 2003, 於: International Journal of Machine Tools and Manufacture. 43, 3, p. 245-252 8 p.

  研究成果: 雜誌貢獻 › 期刊論文 › 同行評審

  • Electric discharge machining 100%
  • Electrodes 65%
  • Composite materials 49%
  • Corrosion resistance 14%
  • Powders 12%
  222 引文 斯高帕斯（Scopus）

• Electrolytic magnetic abrasive finishing

  Yan, B. H., Chang, G. W., Cheng, T. J. & Hsu, R. T., 10月 2003, 於: International Journal of Machine Tools and Manufacture. 43, 13, p. 1355-1366 12 p.

  研究成果: 雜誌貢獻 › 期刊論文 › 同行評審

  • Abrasives 100%
  • Lorentz force 14%
  • Oxide films 13%
  • Magnetic flux 12%
  • Anodes 10%
  72 引文 斯高帕斯（Scopus）
• 2002

  Development of magneto abrasive flow machining process

  Yan, B. H., Lin, Y. C. & Huang, F. Y., 6月 2002, 於: International Journal of Machine Tools and Manufacture. 42, 8, p. 953-959 7 p.

  研究成果: 雜誌貢獻 › 期刊論文 › 同行評審

  • Abrasives 100%
  • Machining 77%
  • Surface roughness 27%
  • Brass 19%
  • Analysis of variance (ANOVA) 16%
  91 引文 斯高帕斯（Scopus）

• Study of precision micro-holes in borosilicate glass using micro EDM combined with micro ultrasonic vibration machining

  Yan, B. H., Wang, A. C., Huang, C. Y. & Huang, F. Y., 8月 2002, 於: International Journal of Machine Tools and Manufacture. 42, 10, p. 1105-1112 8 p.

  研究成果: 雜誌貢獻 › 期刊論文 › 同行評審

  • Borosilicate glass 100%
  • Ultrasonics 59%
  • Machining 54%
  • Electric discharge machining 27%
  • Substrates 16%
  131 引文 斯高帕斯（Scopus）

• Study on cylindrical magnetic abrasive finishing using unbonded magnetic abrasives

  Chang, G. W., Yan, B. H. & Hsu, R. T., 4月 2002, 於: International Journal of Machine Tools and Manufacture. 42, 5, p. 575-583 9 p.

  研究成果: 雜誌貢獻 › 期刊論文 › 同行評審

  • Abrasives 100%
  • Steel 24%
  • Lubricants 13%
  • Particle size 13%
  • Iron 12%
  154 引文 斯高帕斯（Scopus）

• Surface modification of Al-Zn-Mg alloy by combined electrical discharge machining with ball burnish machining

  Yan, B. H., Lin, Y. C. & Huang, F. Y., 6月 2002, 於: International Journal of Machine Tools and Manufacture. 42, 8, p. 925-934 10 p.

  研究成果: 雜誌貢獻 › 期刊論文 › 同行評審

  • Electric discharge machining 100%
  • Surface treatment 89%
  • Machining 67%
  • Surface roughness 35%
  • Corrosion resistance 26%
  31 引文 斯高帕斯（Scopus）

• The effects of material constants on the micropolar elastic honeycomb structure with negative Poisson's ratio using the finite element method

  Huang, F. Y., Yan, B. H. & Yang, D. U., 2002, 於: Engineering Computations (Swansea, Wales). 19, 7-8, p. 742-763 22 p.

  研究成果: 雜誌貢獻 › 期刊論文 › 同行評審

  • Honeycomb structures 100%
  • Honeycomb 95%
  • Poisson's Ratio 92%
  • Micropolar 89%
  • Poisson ratio 80%
  12 引文 斯高帕斯（Scopus）
• 2001

  Micro hole machining of borosilicate glass through electrochemical discharge machining (ECDM)

  Yang, C. T., Ho, S. S. & Yan, B. H., 2001, 於: Key Engineering Materials. 196, p. 149-166 18 p.

  研究成果: 雜誌貢獻 › 期刊論文 › 同行評審

  • Borosilicate glass 100%
  • Machining 89%
  • Borosilicate Glass 86%
  • Electric discharge machining 81%
  • Electrolytes 22%
  72 引文 斯高帕斯（Scopus）

• New mathematical model for multifacet drills derived by using angle-solid model

  Wang, G. C., Fuh, K. H. & Yan, B. H., 1月 2001, 於: International Journal of Machine Tools and Manufacture. 41, 1, p. 103-132 30 p.

  研究成果: 雜誌貢獻 › 期刊論文 › 同行評審

  • Mathematical models 100%
  • Geometry 58%
  • Uncertainty 30%
  2 引文 斯高帕斯（Scopus）

• Surface improvement using a combination of electrical discharge machining with ball burnish machining based on the taguchi method

  Lin, Y. C., Yan, B. H. & Huang, F. Y., 2001, 於: International Journal of Advanced Manufacturing Technology. 18, 9, p. 673-682 10 p.

  研究成果: 雜誌貢獻 › 期刊論文 › 同行評審

  • Taguchi methods 100%
  • Electric discharge machining 99%
  • Machining 67%
  • Surface roughness 52%
  • Burnishing 30%
  75 引文 斯高帕斯（Scopus）

• Surface modification of Al-Zn-Mg aluminum alloy using the combined process of EDM with USM

  Cherng Lin, Y., Hwa Yan, B. & Yuan Huang, F., 24 9月 2001, 於: Journal of Materials Processing Technology. 115, 3, p. 359-366 8 p.

  研究成果: 雜誌貢獻 › 期刊論文 › 同行評審

  • Machining 100%
  • Electric discharge machining 90%
  • Aluminium Alloy 84%
  • Surface treatment 80%
  • Aluminum alloys 66%
  47 引文 斯高帕斯（Scopus）

• Surface modification of SKD 61 during EDM with metal powder in the dielectric

  Yan, B. H., Lin, Y. C., Huang, F. Y. & Wang, C. H., 12月 2001, 於: Materials Transactions. 42, 12, p. 2597-2604 8 p.

  研究成果: 雜誌貢獻 › 期刊論文 › 同行評審

  開啟存取

  • Machining 100%
  • Powder metals 96%
  • metal powder 95%
  • Electric discharge machining 90%
  • Surface treatment 80%
  56 引文 斯高帕斯（Scopus）
• 2000

  Bending analysis of micropolar elastic beam using a 3-D finite element method

  Huang, F. Y., Yan, B. H., Yan, J. L. & Yang, D. U., 2月 2000, 於: International Journal of Engineering Science. 38, 3, p. 275-286 12 p.

  研究成果: 雜誌貢獻 › 期刊論文 › 同行評審

  • Elasticity 100%
  • Finite element method 66%
  • Computer Program 60%
  • Strength of materials 55%
  • Computer program listings 49%
  49 引文 斯高帕斯（Scopus）

• Blind-hole drilling of Al₂O₃/6061Al composite using rotary electro-discharge machining

  Wang, C. C. & Yan, B. H., 15 5月 2000, 於: Journal of Materials Processing Technology. 102, 1, p. 90-102 13 p.

  研究成果: 雜誌貢獻 › 期刊論文 › 同行評審

  • Machining 100%
  • Electric discharge machining 90%
  • Aluminum oxide 73%
  • Drilling 66%
  • Composite materials 44%
  150 引文 斯高帕斯（Scopus）

• Feasibility study of rotary electrical discharge machining with ball burnishing for Al₂O₃/6061Al composite

  Yan, B. H., Wang, C. C., Chow, H. M. & Lin, Y. C., 8月 2000, 於: International Journal of Machine Tools and Manufacture. 40, 10, p. 1403-1421 19 p.

  研究成果: 雜誌貢獻 › 期刊論文 › 同行評審

  • Burnishing 100%
  • Electric discharge machining 81%
  • Aluminum oxide 66%
  • Machining 54%
  • Taguchi methods 54%
  69 引文 斯高帕斯（Scopus）

• Investigation into improving worn electrode reliability in the electrical discharge machining process

  Lin, J. L., Wang, K. S., Yan, B. H. & Tarng, Y. S., 2000, 於: International Journal of Advanced Manufacturing Technology. 16, 2, p. 113-119 7 p.

  研究成果: 雜誌貢獻 › 期刊論文 › 同行評審

  • Electric discharge machining 100%
  • Electrodes 65%
  • Wear of materials 37%
  • Machining 27%
  • Taguchi methods 20%
  32 引文 斯高帕斯（Scopus）

• Machining characteristics of Al₂O₃/6061Al composite using rotary EDM with a disklike electrode

  Yan, B. H., Wang, C. C., Liu, W. D. & Huang, F. Y., 2000, 於: International Journal of Advanced Manufacturing Technology. 16, 5, p. 322-333 12 p.

  研究成果: 雜誌貢獻 › 期刊論文 › 同行評審

  • Aluminum oxide 100%
  • Machining 82%
  • Electrodes 80%
  • Composite materials 60%
  • Taguchi methods 49%
  97 引文 斯高帕斯（Scopus）

• Machining characteristics of titanium alloy (Ti-6Al-4V) using a combination process of EDM with USM

  Lin, Y. C., Yan, B. H. & Chang, Y. S., 31 8月 2000, 於: Journal of Materials Processing Technology. 104, 3, p. 171-177 7 p.

  研究成果: 雜誌貢獻 › 期刊論文 › 同行評審

  • Machining 100%
  • Titanium Alloy 94%
  • Electric discharge machining 90%
  • Titanium alloys 79%
  • Ultrasonics 65%
  195 引文 斯高帕斯（Scopus）

• Optimization of the electrical discharge machining process based on the Taguchi method with fuzzy logics

  Lin, J. L., Wang, K. S., Yan, B. H. & Tarng, Y. S., 15 5月 2000, 於: Journal of Materials Processing Technology. 102, 1, p. 48-55 8 p.

  研究成果: 雜誌貢獻 › 期刊論文 › 同行評審

  • Machining 100%
  • Taguchi methods 90%
  • Electric discharge machining 90%
  • Fuzzy logic 67%
  • Electrodes 29%
  228 引文 斯高帕斯（Scopus）

• Study of added powder in kerosene for the micro-slit machining of titanium alloy using electro-discharge machining

  Chow, H. M., Yan, B. H., Huang, F. Y. & Hung, J. C., 14 4月 2000, 於: Journal of Materials Processing Technology. 101, 1, p. 95-103 9 p.

  研究成果: 雜誌貢獻 › 期刊論文 › 同行評審

  • Machining 100%
  • Titanium Alloy 94%
  • Kerosene 91%
  • Electric discharge machining 90%
  • Titanium alloys 79%
  204 引文 斯高帕斯（Scopus）
• 1999

  Cutting austempered ductile iron using an EDM sinker

  Wang, C. C., Yan, B. H., Chow, H. M. & Suzuki, Y., 15 4月 1999, 於: Journal of Materials Processing Technology. 88, 1, p. 83-89 7 p.

  研究成果: 雜誌貢獻 › 期刊論文 › 同行評審

  • Machining 100%
  • Nodular iron 98%
  • Electric discharge machining 90%
  • Electrodes 58%
  • Behavior as Electrode 38%
  14 引文 斯高帕斯（Scopus）

• Fabrication of micro electrode of carbide and micro hole machining characteristics of Ti-6Al-4V alloy by electrical discharge machining

  Chow, H. M., Yang, C. T., Yan, B. H. & Huang, F. Y., 1999, 於: Keikinzoku/Journal of Japan Institute of Light Metals. 49, 1, p. 2-7 6 p.

  研究成果: 雜誌貢獻 › 期刊論文 › 同行評審

  開啟存取

  • Machining 100%
  • Electric discharge machining 90%
  • Carbides 74%
  • Electrodes 58%
  • Fabrication 56%
  2 引文 斯高帕斯（Scopus）

• Influence of kerosene and distilled water as dielectrics on the electric discharge machining characteristics of Ti-6A1-4V

  Chen, S. L., Yan, B. H. & Huang, F. Y., 1999, 於: Journal of Materials Processing Technology. 87, 1-3, p. 107-111 5 p.

  研究成果: 雜誌貢獻 › 期刊論文 › 同行評審

  • Electric Discharge 100%
  • Machining 87%
  • Kerosene 80%
  • Electric discharge machining 79%
  • Dielectric Material 59%
  160 引文 斯高帕斯（Scopus）

• Machining characteristics of Al₂O₃/6061 Al composite using rotary electro-discharge machining with a tube electrode

  Yan, B. H. & Wang, C. C., 15 10月 1999, 於: Journal of Materials Processing Technology. 95, 1-3, p. 222-231 10 p.

  研究成果: 雜誌貢獻 › 期刊論文 › 同行評審

  • Machining 100%
  • Electric discharge machining 90%
  • Aluminum oxide 73%
  • Electrodes 58%
  • Surface Roughness 51%
  72 引文 斯高帕斯（Scopus）

• Micro-hole machining of carbide by electric discharge machining

  Yan, B. H., Huang, F. Y., Chow, H. M. & Tsai, J. Y., 1999, 於: Journal of Materials Processing Technology. 87, 1-3, p. 139-145 7 p.

  研究成果: 雜誌貢獻 › 期刊論文 › 同行評審

  • Electric Discharge 100%
  • Machining 87%
  • Electric discharge machining 79%
  • Carbides 65%
  • Electrodes 51%
  76 引文 斯高帕斯（Scopus）

• Micro slit machining using electro-discharge machining with a modified rotary disk electrode (RDE)

  Chow, H. M., Yan, B. H. & Huang, F. Y., 30 6月 1999, 於: Journal of Materials Processing Technology. 91, 1, p. 161-166 6 p.

  研究成果: 雜誌貢獻 › 期刊論文 › 同行評審

  • Machining 100%
  • Electric discharge machining 90%
  • Electrodes 58%
  • Behavior as Electrode 38%
  • Rotating disks 32%
  45 引文 斯高帕斯（Scopus）
• 1997

  Electrical discharge machining characteristics of Ti-6Al-4V alloy using distilled water as a dielectric fluid

  Chen, S. L., Huang, F. Y., Suzuki, Y. & Yan, B. H., 4月 1997, 於: Keikinzoku/Journal of Japan Institute of Light Metals. 47, 4, p. 226-231 6 p.

  研究成果: 雜誌貢獻 › 期刊論文 › 同行評審

  開啟存取

  • Machining 100%
  • Electric discharge machining 90%
  • Dielectric Material 67%
  • Kerosene 65%
  • Alloy 53%
  1 引文 斯高帕斯（Scopus）

• Improvement of material removal rate of Ti-6Al-4V alloy by electrical discharge machining with multiple ultrasonic vibration

  Chen, S. L., Huang, F. Y., Suzuki, Y. & Yan, B. H., 4月 1997, 於: Keikinzoku/Journal of Japan Institute of Light Metals. 47, 4, p. 220-225 6 p.

  研究成果: 雜誌貢獻 › 期刊論文 › 同行評審

  開啟存取

  • Machining 100%
  • Electric discharge machining 90%
  • Ultrasonics 65%
  • Alloy 53%
  • Electrodes 29%
  4 引文 斯高帕斯（Scopus）
• 1995

  Effects of cooling dielectric on electrical discharge machining characteristics of 7075 aluminum alloy

  Suzuki, Y., Yan, B. H. & Hsu, H. O., 1995, 於: Keikinzoku/Journal of Japan Institute of Light Metals. 45, 10, p. 543-548 6 p.

  研究成果: 雜誌貢獻 › 期刊論文 › 同行評審

  • Machining 100%
  • Electric discharge machining 90%
  • Aluminium Alloy 84%
  • Cooling 67%
  • Dielectric Material 67%

• Study on the turning characteristics of alumina-based ceramics

  Yan, B. H., Huang, F. Y. & Chow, H. M., 10月 1995, 於: Journal of Materials Processing Technology. 54, 1-4, p. 341-347 7 p.

  研究成果: 雜誌貢獻 › 期刊論文 › 同行評審

  • Alumina 100%
  • Ceramic 77%
  • Wear 56%
  • Wear of materials 27%
  • Coolant 26%
  10 引文 斯高帕斯（Scopus）
• 1994

  Characteristics of SKD11 by complex process of electrical discharge machining using liquid suspended with alumina powder

  Yan, B. H. & Chen, S. L., 1994, 於: Nippon Kinzoku Gakkaishi/Journal of the Japan Institute of Metals. 58, 9, p. 1067-1072 6 p.

  研究成果: 雜誌貢獻 › 期刊論文 › 同行評審

  開啟存取

  • Machining 100%
  • Electric discharge machining 90%
  • machining 80%
  • Alumina 75%
  • aluminum oxides 62%
  43 引文 斯高帕斯（Scopus）

• Effect of ultrasonic vibration on electrical discharge machining characteristics of Ti-6Al-4V alloy

  Yan, B. H. & Der Chen, M., 1994, 於: Keikinzoku/Journal of Japan Institute of Light Metals. 44, 5, p. 281-285 5 p.

  研究成果: 雜誌貢獻 › 期刊論文 › 同行評審

  開啟存取

  • Machining 100%
  • Electric discharge machining 90%
  • Dielectric Material 67%
  • Ultrasonics 65%
  • Alloy 53%
  22 引文 斯高帕斯（Scopus）
• 1993

  Effects of dielectric with suspended aluminum powder on EDM

  Yan, B. H. & Chen, S. L., 6月 1993, 於: Journal of the Chinese Society of Mechanical Engineers, Transactions of the Chinese Institute of Engineers, Series C/Chung-Kuo Chi Hsueh Kung Ch'eng Hsuebo Pao. 14, 3, p. 307-312 6 p.

  研究成果: 雜誌貢獻 › 期刊論文 › 同行評審

  • Powders 100%
  • Aluminum 95%
  • Surface roughness 68%
  • Electrodes 31%
  • Wear of materials 30%
  46 引文 斯高帕斯（Scopus）
• 1992

  Electrical discharge machining characteristics of Ti-6Al-4V alloy

  Yan, B. H. & Shieh, F. T., 1992, 於: Keikinzoku/Journal of Japan Institute of Light Metals. 42, 11, p. 644-649 6 p.

  研究成果: 雜誌貢獻 › 期刊論文 › 同行評審

  開啟存取

  • Machining 100%
  • Electric discharge machining 90%
  • Graphite electrodes 79%
  • Copper 62%
  • Electrodes 58%

• Machinability of hypereutectic Al-Si alloy fabricated by rapid solidification process

  Yan, B. H., Lee, S. L. & Chang, S. S., 8月 1992, 於: Keikinzoku/Journal of Japan Institute of Light Metals. 43, 2, p. 102-106 5 p.

  研究成果: 雜誌貢獻 › 期刊論文 › 同行評審

  • Rapid Solidification 100%
  • Rapid solidification 99%
  • Machinability 83%
  • Alloy 49%
  • Casting 20%

• Machinability of SiC particle reinforced aluminum alloy composite material

  Biing-Hwa, Y. & Chra-Chung, W., 8月 1992, 於: Keikinzoku/Journal of Japan Institute of Light Metals. 43, 4, p. 187-192 6 p.

  研究成果: 雜誌貢獻 › 期刊論文 › 同行評審

  開啟存取
  37 引文 斯高帕斯（Scopus）
• 1990

  The formation of a protective oxide layer in machining resulphurized free-cutting steels and cast irons

  Yamane, Y., Usuki, H., Yan, B. & Narutaki, N., 8月 1990, 於: Wear. 139, 2, p. 195-208 14 p.

  研究成果: 雜誌貢獻 › 期刊論文 › 同行評審

  • Machining 100%
  • Cast iron 81%
  • machining 80%
  • casts 68%
  • Oxides 65%
  18 引文 斯高帕斯（Scopus）
• 1988

  Tool Wear and Cutting Performance of Silicon Nitride Ceramic Tool (1st Report) —In the Case of Turning Cast Irons—

  Yamane, Y., Yan, B. H., Usuki, H. & Narutaki, N., 1988, 於: Journal of the Japan Society for Precision Engineering. 54, 2, p. 365-371 7 p.

  研究成果: 雜誌貢獻 › 期刊論文 › 同行評審

  開啟存取

  • Ceramic tools 100%
  • Silicon nitride 81%
  • Cast iron 71%
  • Wear of materials 48%
  • Carbon steel 23%
  5 引文 斯高帕斯（Scopus）
• 1987

  Machinability of Resulfurized Steels under High Cutting Speed

  Narutaki, N., Yamane, Y., Usuki, H., Yan, B. & Kuwana, T., 1987, 於: Journal of the Japan Society for Precision Engineering. 53, 3, p. 455-460 6 p.

  研究成果: 雜誌貢獻 › 期刊論文 › 同行評審

  開啟存取

  • Machinability 100%
  • Wear of materials 50%
  • Steel 48%
  • Machining 33%
  • Ingots 32%
  6 引文 斯高帕斯（Scopus）

• Study on Machinability of Resulfurized Steels under High Cutting Speed (2nd Report) —Relationship between Deoxidized Condition and Crater Wear in Cutting with Ceramic Tool—

  Yamane, Y., Yan, B., Usuki, H. & Narutaki, N., 1987, 於: Journal of the Japan Society for Precision Engineering. 53, 11, p. 1779-1784 6 p.

  研究成果: 雜誌貢獻 › 期刊論文 › 同行評審

  開啟存取

  • Ceramic cutting tools 100%
  • Machinability 75%
  • Ceramic tools 66%
  • Wear of materials 45%
  • Steel 36%
  1 引文 斯高帕斯（Scopus）
• 1984

  Cut surface roughness of Al-Si alloys using CBN and diamond sintered tool

  Takatsuji, Y., Zaima, S., Yan, B. H. & Yamada, S., 1月 1984, 於: Keikinzoku/Journal of Japan Institute of Light Metals. 34, 1, p. 14-21 8 p.

  研究成果: 雜誌貢獻 › 期刊論文 › 同行評審

  開啟存取

  • Cast Alloys 100%
  • Surface Roughness 64%
  • Diamonds 63%
  • Diamond 60%
  • Surface roughness 53%

• Some Considerations on the Wear of Sintered Diamond Powder Tool in Al-Si Cast Alloys Cutting

  Zaima, S., Yamada, S. & Yan, B. H., 1月 1984, 於: Journal of the Society of Materials Science, Japan. 33, 370, p. 927-933 7 p.

  研究成果: 雜誌貢獻 › 期刊論文 › 同行評審

  開啟存取

  • Cast Alloys 100%
  • cast alloys 75%
  • Diamonds 63%
  • Diamond 60%
  • Wear 60%