機械工程學系

2022

Extraction and Application of Inertial Sensors-Based Kinematic Parameters in a Clinical Walk Test among Stroke Survivors

Han, S. L., Cai, M. L., Sugiharto, T. & Pan, M. C., 19 4月 2022, 於: Journal of Physics: Conference Series. 2224, 1, 012080.

研究成果: 雜誌貢獻 › 會議論文 › 同行評審

開啟存取

2021

An analytical model for precision milling of screw rotor using a disk-like form-milling cutter with multiple inserts

Arifin, A. & Wu, Y. R., 26 3月 2021, 於: Journal of Physics: Conference Series. 1833, 1, 012045.

研究成果: 雜誌貢獻 › 會議論文 › 同行評審

開啟存取

2020

Adopting a Single Inertial Sensor and Designed Motion to Classify Brunnstrom Stages for Lower Extremities on Post-stroke Patients

Han, S. L., Li, H. T., Chang, H. P. & Pan, M. C., 17 7月 2020, 於: Journal of Physics: Conference Series. 1583, 1, 012010.

研究成果: 雜誌貢獻 › 會議論文 › 同行評審

開啟存取

Characteristics research of different electrode tip shapes by electrodeposition for micro slot ECM

Hung, J. C. & Chen, P. C., 2020, 於: Procedia CIRP. 95, p. 798-802 5 p.

研究成果: 雜誌貢獻 › 會議論文 › 同行評審

開啟存取

Hybrid Power Systems for Buildings and Factories

Tseng, C. J., Chen, C. I., Yao, C. Y. & Lee, K. R., 23 11月 2020, 於: E3S Web of Conferences. 209, 02008.

研究成果: 雜誌貢獻 › 會議論文 › 同行評審

開啟存取

Injection Molding Study on the Strength of Weld Line for Polycarbonate and Carbon Fiber Composite Material

Chung, C. Y., Yeh, C. C. & Lin, C. M., 15 6月 2020, 於: IOP Conference Series: Materials Science and Engineering. 842, 1, 012018.

研究成果: 雜誌貢獻 › 會議論文 › 同行評審

開啟存取

Numerical Studies on Fast Pyrolysis of Palm Kernel Shell in a Fluidized Bed Reactor

Thoharudin, Chen, Y. S. & Hsiau, S. S., 1 7月 2020, 於: IOP Conference Series: Materials Science and Engineering. 874, 1, 012033.

研究成果: 雜誌貢獻 › 會議論文 › 同行評審

開啟存取

2 引文斯高帕斯（Scopus）

Ultrasonic vibration-assisted electrical discharge machining on Fe-based metallic glass by adding conductive powder

Tsui, H. P., Lee, P. H., Yeh, C. C. & Hung, J. C., 2020, 於: Procedia CIRP. 95, p. 425-430 6 p.

研究成果: 雜誌貢獻 › 會議論文 › 同行評審

開啟存取

6 引文斯高帕斯（Scopus）

2019

Thermal and mechanical analysis of butt welding

Andya, H., Shen, L. C., Luo, Y. Z., Lin, C. K., Wu, C. H. & Huang, Y. M., 2019, 於: Proceedings of the World Congress on Mechanical, Chemical, and Material Engineering. 105.

研究成果: 雜誌貢獻 › 會議論文 › 同行評審

開啟存取

Use of CFD to Investigate Flow Characteristics and Oil Distribution Inside an Oil-injected Screw Compressor

Zhang, J. W., Wu, Y. R., Hsieh, S. H. & Huang, C. S., 3 9月 2019, 於: IOP Conference Series: Materials Science and Engineering. 604, 1, 012016.

研究成果: 雜誌貢獻 › 會議論文 › 同行評審

開啟存取

2018

An experimental investigation on flow boiling heat transfer of refrigerants HFO-1234yf and HFC-134a in microchannels

Nalbandian, H., Yang, C. Y. & Chen, K. T., 2018, 於: Refrigeration Science and Technology. Part F147651, p. 512-519 8 p.

研究成果: 雜誌貢獻 › 會議論文 › 同行評審

Fabrication of an Electrode Insulated by Using Hot Dip Aluminizing and Micro-arc Oxidation Method for Electrochemical Microhole Machining

Hung, J. C., Ku, C. Y. & Fan, Z. W., 2018, 於: Procedia CIRP. 68, p. 438-443 6 p.

研究成果: 雜誌貢獻 › 會議論文 › 同行評審

開啟存取

1 引文斯高帕斯（Scopus）

Integration of computer-assisted fracture reduction system and a hybrid 3-DOF-RPS mechanism for assisting the orthopedic surgery

Irwansyah, Sinh, N. P., Lai, J. Y., Essomba, T., Asbar, R. & Lee, P. Y., 19 2月 2018, 於: IOP Conference Series: Materials Science and Engineering. 308, 1, 012010.

研究成果: 雜誌貢獻 › 會議論文 › 同行評審

開啟存取

2 引文斯高帕斯（Scopus）

Machining Performances of Electrical Discharge Machining Combined with Abrasive Jet Machining

Lin, Y. C., Hung, J. C., Lee, H. M., Wang, A. C. & Fan, S. F., 2018, 於: Procedia CIRP. 68, p. 162-167 6 p.

研究成果: 雜誌貢獻 › 會議論文 › 同行評審

開啟存取

3 引文斯高帕斯（Scopus）

Numerical simulation of the oxygen distribution in silicon melt for different argon gas flow rates during Czochralski silicon crystal growth process

Ida, Z., Chen, J. C. & Nguyen, T. H. T., 21 9月 2018, 於: MATEC Web of Conferences. 204, 05013.

研究成果: 雜誌貢獻 › 會議論文 › 同行評審

開啟存取

1 引文斯高帕斯（Scopus）

2017

A Method for Generating Helical Surface of the VPA Hob on a CNC Worm Grinding Machine

Tran, V. T., Hsu, R. H., Chen, S. S. & Wu, Y. R., 9 2月 2017, 於: MATEC Web of Conferences. 95, 04002.

研究成果: 雜誌貢獻 › 會議論文 › 同行評審

開啟存取

1 引文斯高帕斯（Scopus）

A Numerical Method for Reversely Generating a Pair of Conjugated Rotor Profiles of Twin-screw Compressor from the Measured Profile Data

Hsu, R. H., Wu, Y. R. & Chen, Z. A., 2017, 於: Procedia CIRP. 63, p. 483-487 5 p.

研究成果: 雜誌貢獻 › 會議論文 › 同行評審

開啟存取

2 引文斯高帕斯（Scopus）

Design of cycloid planetary gear drives with tooth number difference of two a comparative study on contact characteristics and load analysis

Tsai, S. J., Chang, L. C. & Huang, C. H., 2017, 於: VDI Berichte. 2017, 2294, p. 1618-1630 13 p.

研究成果: 雜誌貢獻 › 會議論文 › 同行評審

Dual lead-crowning for helical gears with anti-twist tooth flanks on the internal gear honing machine

Tran, V. Q. & Wu, Y. R., 14 12月 2017, 於: IOP Conference Series: Materials Science and Engineering. 282, 1, 012005.

研究成果: 雜誌貢獻 › 會議論文 › 同行評審

開啟存取

2 引文斯高帕斯（Scopus）

Optimization of heat exchanger size of a 10 kW organic Rankine cycle system

Jafari, A., Yang, C. Y. & Chang, C. C., 2017, 於: Energy Procedia. 129, p. 851-858 8 p.

研究成果: 雜誌貢獻 › 會議論文 › 同行評審

開啟存取

6 引文斯高帕斯（Scopus）

The granular thermal behaviour in a vibrated bed

Hsiau, S. S., Sheng, L. T. & Chiu, S. L., 2017, 於: International Conference on Fluid Flow, Heat and Mass Transfer.

研究成果: 雜誌貢獻 › 會議論文 › 同行評審

開啟存取

2016

A tooth flank crowning method by applying a novel crossed angle function between the hob cutter and work gear in the gear hobbing process

Wu, Y. R., Tran, V. T. & Hsu, R. H., 11 4月 2016, 於: MATEC Web of Conferences. 52, 03001.

研究成果: 雜誌貢獻 › 會議論文 › 同行評審

開啟存取

1 引文斯高帕斯（Scopus）

Fabrication of an Electrode Insulation Layer for Electrochemical Machining by Using hot Dip Aluminizing and Micro-arc Oxidation Method

Hung, J. C., Ku, C. Y., Ger, M. D. & Fen, Z. W., 2016, 於: Procedia CIRP. 42, p. 390-395 6 p.

研究成果: 雜誌貢獻 › 會議論文 › 同行評審

開啟存取

3 引文斯高帕斯（Scopus）

Machining Characteristics of a Hybrid Process of EDM in Gas Combined with Ultrasonic Vibration and AJM

Lin, Y. C., Hung, J. C., Chow, H. M., Wang, A. C. & Chen, J. T., 2016, 於: Procedia CIRP. 42, p. 167-172 6 p.

研究成果: 雜誌貢獻 › 會議論文 › 同行評審

開啟存取

23 引文斯高帕斯（Scopus）

2015

Correlations of high-pressure lean methane and syngas turbulent burning velocities: Effects of turbulent Reynolds, Damköhler, and Karlovitz numbers

Shy, S. S., Liu, C. C., Lin, J. Y., Chen, L. L., Lipatnikov, A. N. & Yang, S. I., 2015, 於: Proceedings of the Combustion Institute. 35, 2, p. 1509-1516 8 p.

研究成果: 雜誌貢獻 › 會議論文 › 同行評審

44 引文斯高帕斯（Scopus）

Fabrication of a three dimensional cantilevered vibrational energy harvester using silver ink

Chen, S. J., Feng, Y. Y. & Liu, S. Y., 26 2月 2015, 於: Proceedings of the IEEE International Conference on Micro Electro Mechanical Systems (MEMS). 2015-February, February, p. 1075-1077 3 p., 7051149.

研究成果: 雜誌貢獻 › 會議論文 › 同行評審

3 引文斯高帕斯（Scopus）

2014

Effects of particle stiffness on mechanical response of granular solid under confined compression

Peng, H. H., Lin, C. K. & Chung, Y. C., 2014, 於: Procedia Engineering. 79, p. 143-152 10 p.

研究成果: 雜誌貢獻 › 會議論文 › 同行評審

開啟存取

4 引文斯高帕斯（Scopus）

Mechanical properties of Ba_1-xK_xCe_0.6Zr_0.2Y_0.2O_3-δ oxides by nanoindentation

Yang, P. F., Chen, D. L., Jian, S. R., Lee, S. W. & Tseng, C. J., 2014, 於: Procedia Engineering. 79, p. 599-605 7 p.

研究成果: 雜誌貢獻 › 會議論文 › 同行評審

開啟存取

5 引文斯高帕斯（Scopus）

2013

Development of helical electrode insulation layer for electrochemical microdrilling

Hung, J., Liu, H., Chang, Y., Hung, K. & Liu, S., 2013, 於: Procedia CIRP. 6, p. 373-377 5 p.

研究成果: 雜誌貢獻 › 會議論文 › 同行評審

開啟存取

12 引文斯高帕斯（Scopus）

2012

Characteristics study of flexible magnetic abrasive in abrasive jet machining

Ke, J. H., Tsai, F. C., Hung, J. C. & Yan, B. H., 2012, 於: Procedia CIRP. 1, 1, p. 679-680 2 p.

研究成果: 雜誌貢獻 › 會議論文 › 同行評審

8 引文斯高帕斯（Scopus）

2009

Spatiotemporal measurements of flame stretch and propagation rates for lean and rich CH₄/air premixed flames interacting with a turbulent-wake

Huang, I. F., Shy, S. S., Chang, C. C., Li, S. C. & Huang, C. M., 2009, 於: Proceedings of the Combustion Institute. 32 II, 2, p. 1755-1762 8 p.

研究成果: 雜誌貢獻 › 會議論文 › 同行評審

4 引文斯高帕斯（Scopus）

2008

Broadband optical directional full couplers based on Blackman function

Chen, C. F. & Ku, Y. S., 2008, 於: Proceedings of SPIE - The International Society for Optical Engineering. 7134, 71342N.

研究成果: 雜誌貢獻 › 會議論文 › 同行評審

2 引文斯高帕斯（Scopus）

2007

A transition on minimum ignition energy for lean turbulent methane combustion in flamelet and distributed regimes

Huang, C. C., Shy, S. S., Liu, C. C. & Yan, Y. Y., 2007, 於: Proceedings of the Combustion Institute. 31 I, 1, p. 1401-1409 9 p.

研究成果: 雜誌貢獻 › 會議論文 › 同行評審

87 引文斯高帕斯（Scopus）

Photorefractive and photochromic properties of Ru-doped lithium niobate crystal

Chiang, C. H., Chen, J. C. & Hu, C., 2007, 於: Optics InfoBase Conference Papers.

研究成果: 雜誌貢獻 › 會議論文 › 同行評審

2006

Durability assessment and riding comfort evaluation of a new type scooter by road simulation technique

Lin, K. Y., Hwang, J. R., Chang, J. M., Chen, C. T., Chen, C. T., Chen, C. C. & Hsieh, C. C., 2006, 於: SAE Technical Papers.

研究成果: 雜誌貢獻 › 會議論文 › 同行評審

6 引文斯高帕斯（Scopus）

Femtosecond solitons in a dispersion flattened fiber with slow group-velocity

Chen, C. F., 2006, 於: Proceedings of SPIE - The International Society for Optical Engineering. 6025, 602524.

研究成果: 雜誌貢獻 › 會議論文 › 同行評審

System dynamics and ride quality assessment of automobile

Lin, K. Y., Hwang, J. R., Chang, S. H., Fung, C. P. & Chang, J. M., 2006, 於: SAE Technical Papers.

研究成果: 雜誌貢獻 › 會議論文 › 同行評審

7 引文斯高帕斯（Scopus）

2005

A common-path phase-shift interferometry surface plasmon resonance imaging system

Su, Y. T., Chen, S. J. & Yeh, T. L., 2005, 於: Progress in Biomedical Optics and Imaging - Proceedings of SPIE. 5703, p. 144-151 8 p., 26.

研究成果: 雜誌貢獻 › 會議論文 › 同行評審

2 引文斯高帕斯（Scopus）

Current observer for sampled-data fuzzy systems

Lo, J. C. & Su, C. H., 2005, 於: Proceedings of the American Control Conference. 6, p. 4210-4214 5 p.

研究成果: 雜誌貢獻 › 會議論文 › 同行評審

3 引文斯高帕斯（Scopus）

Durability Assessments of Motorcycle Handlebars

Lin, K. Y., Chang, J. M., Wu, J. H., Chang, C. H., Chang, S. H., Hwang, J. R. & Fung, C. P., 2005, 於: SAE Technical Papers.

研究成果: 雜誌貢獻 › 會議論文 › 同行評審

1 引文斯高帕斯（Scopus）

H_∞ filtering for fast-varying-delay Takagi-Sugeno fuzzy systems

Lin, Y. C. & Lo, J. C., 2005, 於: Conference Proceedings - IEEE International Conference on Systems, Man and Cybernetics. 1, p. 582-587 6 p.

研究成果: 雜誌貢獻 › 會議論文 › 同行評審

2 引文斯高帕斯（Scopus）

Investigations of the growth mechanism of stoichiometric LiNbO₃ fibers grown by the laser-heated pedestal growth method

Chen, C. Y., Chen, J. C. & Lai, Y. J., 15 2月 2005, 於: Journal of Crystal Growth. 275, 1-2, p. e763-e768

研究成果: 雜誌貢獻 › 會議論文 › 同行評審

5 引文斯高帕斯（Scopus）

NIR image reconstruction using a single-rotating-source/detector scanning device

Pan, M. C., Cheng, C. H., Huang, W. H., Pan, M. C. & Tseng, C. S., 2005, 於: Progress in Biomedical Optics and Imaging - Proceedings of SPIE. 5859, p. 1-9 9 p., 58590O.

研究成果: 雜誌貢獻 › 會議論文 › 同行評審

7 引文斯高帕斯（Scopus）

Observer-based control for sampled-data fuzzy systems

Lo, J. C. & Hsieh, L. T., 2005, 於: IEEE International Conference on Fuzzy Systems. p. 383-388 6 p.

研究成果: 雜誌貢獻 › 會議論文 › 同行評審

3 引文斯高帕斯（Scopus）

Study of Raman effect of ultrashort pulse in optical fiber

Chen, C. F., Luo, B. & Chi, S., 2005, 於: Proceedings of SPIE - The International Society for Optical Engineering. 5646, p. 450-457 8 p., 83.

研究成果: 雜誌貢獻 › 會議論文 › 同行評審

1 引文斯高帕斯（Scopus）

The heat dissipation performance of LED applied a MHP

Sheu, G. J., Hwu, F. S., Tu, S. H., Chen, W. T., Chang, J. Y. & Chen, J. C., 2005, 於: Proceedings of SPIE - The International Society for Optical Engineering. 5941, p. 1-8 8 p., 594113.

研究成果: 雜誌貢獻 › 會議論文 › 同行評審

19 引文斯高帕斯（Scopus）

Tunable optical fiber grating using a memory alloy actuator

Chen, C. F. & Zheng, R. T., 2005, 於: Proceedings of SPIE - The International Society for Optical Engineering. 6019 II, 60193J.

研究成果: 雜誌貢獻 › 會議論文 › 同行評審

2004

Angular distribution of sputtered particles induced by ion bombardment

Lee, C. S., Liu, Y. C., Chen, Y. H. & Lee, S., 6月 2004, 於: Nuclear Instruments and Methods in Physics Research, Section B: Beam Interactions with Materials and Atoms. 219-220, 1-4, p. 221-225 5 p.

研究成果: 雜誌貢獻 › 會議論文 › 同行評審

2 引文斯高帕斯（Scopus）

Design, fabrication, and mixing characteristics of an electrostatically activated resonant micropump-mixer

Tsao, C. W. & Mohseni, K., 2004, 於: American Society of Mechanical Engineers, Micro-Electro Mechanical Systems Division, (Publications) MEMS. p. 115-123 9 p., IMECE2004-59597.

研究成果: 雜誌貢獻 › 會議論文 › 同行評審

2 引文斯高帕斯（Scopus）

Effectiveness of problem-solving and teamwork skills for cultivating technological creativity within a team-based design course

Wu, J. C. & Chang, P. F., 2004, 於: ASEE Annual Conference Proceedings. p. 4411-4421 11 p.

研究成果: 雜誌貢獻 › 會議論文 › 同行評審

1 引文斯高帕斯（Scopus）

機械工程學系

研究成果

搜尋結果