機械工程學系

2016

Design process for robotic medical tool guidance manipulators

Nouaille, L., Laribi, M. A., Nelson, C. A., Essomba, T., Poisson, G. & Zeghloul, S., 1 2月 2016, 於: Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science. 230, 2, p. 259-275 17 p.

研究成果: 雜誌貢獻 › 期刊論文 › 同行評審

11 引文斯高帕斯（Scopus）

Development of an angular displacement measurement technique through birefringence heterodyne interferometry

Hsieh, H. L., Lee, J. Y., Chen, L. Y. & Yang, Y., 4 4月 2016, 於: Optics Express. 24, 7, p. 6802-6813 12 p.

研究成果: 雜誌貢獻 › 期刊論文 › 同行評審

開啟存取

15 引文斯高帕斯（Scopus）

Diffuse optical imaging through incorporating structural information into edge-preserving regularization

Chen, L. Y., Pan, M. C., Yu, J. M. & Pan, M. C., 1 2月 2016, 於: Optical and Quantum Electronics. 48, 2, p. 1-16 16 p., 130.

研究成果: 雜誌貢獻 › 期刊論文 › 同行評審

1 引文斯高帕斯（Scopus）

Dynamic response prediction of a twin-screw compressor with gas-induced cyclic loads based on multi-body dynamics

Wu, Y. R. & Tran, V. T., 1 5月 2016, 於: International Journal of Refrigeration. 65, p. 111-128 18 p.

研究成果: 雜誌貢獻 › 期刊論文 › 同行評審

19 引文斯高帕斯（Scopus）

Effect of adding a small amount of liquid on density-induced wet granular segregation in a rotating drum

Liao, C. C., Hsiau, S. S. & Wen, S. F., 1 7月 2016, 於: Advanced Powder Technology. 27, 4, p. 1265-1271 7 p.

研究成果: 雜誌貢獻 › 期刊論文 › 同行評審

19 引文斯高帕斯（Scopus）

Effect of Lorentz force on hydrogen production in water electrolysis employing multielectrodes

Lin, M. Y., Hsu, W. N., Hourng, L. W., Shih, T. S. & Hung, C. M., 2016, 於: Journal of Marine Science and Technology (Taiwan). 24, 3, p. 511-518 8 p.

研究成果: 雜誌貢獻 › 期刊論文 › 同行評審

13 引文斯高帕斯（Scopus）

Effect of rotationally moving surface on roughness measurement of sputtered Pt film with close-loop correction using adaptive optics

Fuh, Y. K., Wang, C. H., Huang, C. T., Chen, P. W. & Lai, Z. H., 1 2月 2016, 於: Optik. 127, 3, p. 1349-1353 5 p.

研究成果: 雜誌貢獻 › 期刊論文 › 同行評審

2 引文斯高帕斯（Scopus）

Effects of cryogenic forging and anodization on the mechanical properties and corrosion resistance of AA6066–T6 aluminum alloys

Shih, T. S., Yong, H. S. & Hsu, W. N., 3 3月 2016, 於: Metals. 6, 3, 51.

研究成果: 雜誌貢獻 › 期刊論文 › 同行評審

開啟存取

7 引文斯高帕斯（Scopus）

Effects of Cryogenic Forging and Anodization on the Mechanical Properties of AA 7075-T73 Aluminum Alloys

Shih, T. S., Liao, T. W. & Hsu, W. N., 1 3月 2016, 於: Journal of Materials Engineering and Performance. 25, 3, p. 1211-1218 8 p.

研究成果: 雜誌貢獻 › 期刊論文 › 同行評審

2 引文斯高帕斯（Scopus）

Effects of the hot zone design during the growth of large size multi-crystalline silicon ingots by the seeded directional solidification process

Nguyen, T. H. T., Liao, S. H., Chen, J. C., Chen, C. H., Huang, Y. H., Yang, C. J., Lin, H. W. & Nguyen, H. B., 15 10月 2016, 於: Journal of Crystal Growth. 452, p. 27-34 8 p.

研究成果: 雜誌貢獻 › 期刊論文 › 同行評審

26 引文斯高帕斯（Scopus）

Effects of varied cortical shells and tooth situations to the structure resonance in dental implantation

Cong, T. M., Chen, C. S. & Pan, M. C., 1 9月 2016, 於: Journal of Medical Devices, Transactions of the ASME. 10, 3, p. 1-2 2 p.

研究成果: 雜誌貢獻 › 期刊論文 › 同行評審

Encapsulation of single cells into fixed droplets using triangular microwells

Hattori, A., Yagi, T. & Tsao, C. W., 1 2月 2016, 於: Electronics and Communications in Japan. 99, 2, p. 55-63 9 p.

研究成果: 雜誌貢獻 › 期刊論文 › 同行評審

4 引文斯高帕斯（Scopus）

Endocardial Remodeling in Heart Failure Patients with Impaired and Preserved Left Ventricular Systolic Function-A Magnetic Resonance Image Study

Lin, L. Y., Su, M. Y. M., Pham, V. T., Tran, T. T., Wang, Y. H., Tseng, W. Y. I., Lo, M. T. & Lin, J. L., 15 2月 2016, 於: Scientific Reports. 6, 20868.

研究成果: 雜誌貢獻 › 期刊論文 › 同行評審

開啟存取

6 引文斯高帕斯（Scopus）

Fabrication of 3D microstructure by localized electrochemical deposition with image feedback distance control and five-axis motion platform

Ciou, Y. J., Hwang, Y. R., Lin, J. C. & Tseng, Y. T., 2016, 於: ECS Journal of Solid State Science and Technology. 5, 7, p. P425-P432

研究成果: 雜誌貢獻 › 期刊論文 › 同行評審

12 引文斯高帕斯（Scopus）

Fabrication of a 2-DOF electromagnetic energy harvester with in-phase vibrational bandwidth broadening

Chen, S. J. & Wu, J. Y., 12 8月 2016, 於: Smart Materials and Structures. 25, 9, 095047.

研究成果: 雜誌貢獻 › 期刊論文 › 同行評審

14 引文斯高帕斯（Scopus）

Fabrication of an electro-thermal micro-gripper with elliptical cross-sections using silver-nickel composite ink

Feng, Y. Y., Chen, S. J., Hsieh, P. H. & Chu, W. T., 1 7月 2016, 於: Sensors and Actuators, A: Physical. 245, p. 106-112 7 p.

研究成果: 雜誌貢獻 › 期刊論文 › 同行評審

21 引文斯高帕斯（Scopus）

Fatigue properties of 6061-T6 aluminum alloy butt joints processed by vacuum brazing and tungsten inert gas welding

Lin, H., Hwang, J. R. & Fung, C. P., 4月 2016, 於: Advances in Mechanical Engineering. 8, 4, p. 1-13 13 p.

研究成果: 雜誌貢獻 › 期刊論文 › 同行評審

開啟存取

6 引文斯高帕斯（Scopus）

Fatigue Properties of 6061-T6 Aluminum Alloy T-Joints Processed by Vacuum Brazing and TIG Welding

Lin, H., Hwang, J. R. & Fung, C. P., 2016, 於: Materials Transactions. 57, 2, p. 127-134 8 p.

研究成果: 雜誌貢獻 › 期刊論文 › 同行評審

開啟存取

4 引文斯高帕斯（Scopus）

Has energy conservation been an effective policy for Thailand? An input–output structural decomposition analysis from 1995 to 2010

Supasa, T., Hsiau, S. S., Lin, S. M., Wongsapai, W. & Wu, J. C., 1 11月 2016, 於: Energy Policy. 98, p. 210-220 11 p.

研究成果: 雜誌貢獻 › 期刊論文 › 同行評審

27 引文斯高帕斯（Scopus）

Highly flexible self-powered sensors based on printed circuit board technology for human motion detection and gesture recognition

Fuh, Y. K. & Ho, H. C., 29 1月 2016, 於: Nanotechnology. 27, 9, 095401.

研究成果: 雜誌貢獻 › 期刊論文 › 同行評審

30 引文斯高帕斯（Scopus）

Highly stretchable conductive polypyrrole film on a three dimensional porous polydimethylsiloxane surface fabricated by a simple soft lithography process

Tsao, C. W., Guo, X. C. & Hu, W. W., 2016, 於: RSC Advances. 6, 114, p. 113344-113351 8 p.

研究成果: 雜誌貢獻 › 期刊論文 › 同行評審

10 引文斯高帕斯（Scopus）

High-temperature, high-pressure burning velocities of expanding turbulent premixed flames and their comparison with Bunsen-type flames

Jiang, L. J., Shy, S. S., Li, W. Y., Huang, H. M. & Nguyen, M. T., 1 10月 2016, 於: Combustion and Flame. 172, p. 173-182 10 p.

研究成果: 雜誌貢獻 › 期刊論文 › 同行評審

43 引文斯高帕斯（Scopus）

Hot bend assisted gas forming of AA5083 sheet for making V-shaped trough containing deep uneven concavities

TANG, J. S. & LEE, S., 1 6月 2016, 於: Transactions of Nonferrous Metals Society of China (English Edition). 26, 6, p. 1546-1554 9 p.

研究成果: 雜誌貢獻 › 期刊論文 › 同行評審

1 引文斯高帕斯（Scopus）

Improving the injection molding of small optical elements by integrating reverse engineering and mold flow analysis

Lai, J. Y., Wen, Y. Y. & Liu, C. H., 2016, 於: ARPN Journal of Engineering and Applied Sciences. 11, 2, p. 867-872 6 p.

研究成果: 雜誌貢獻 › 期刊論文 › 同行評審

Influence of particle surface roughness on creeping granular motion

Sheng, L. T., Chang, W. C. & Hsiau, S. S., 11 7月 2016, 於: Physical Review E - Statistical, Nonlinear, and Soft Matter Physics. 94, 1, 012903.

研究成果: 雜誌貢獻 › 期刊論文 › 同行評審

11 引文斯高帕斯（Scopus）

Inhibition effect of a laser on thickness increase of p-type porous silicon in electrochemical anodizing

Chiang, C. C., Juan, P. C. & Lee, T. H., 2016, 於: Journal of the Electrochemical Society. 163, 5, p. H265-H268

研究成果: 雜誌貢獻 › 期刊論文 › 同行評審

11 引文斯高帕斯（Scopus）

Investigation of friction effect on granular dynamic behavior in a rotating drum

Chou, S. H., Hu, H. J. & Hsiau, S. S., 1 9月 2016, 於: Advanced Powder Technology. 27, 5, p. 1912-1921 10 p.

研究成果: 雜誌貢獻 › 期刊論文 › 同行評審

14 引文斯高帕斯（Scopus）

Janus Spectra in Two-Dimensional Flows

Liu, C. C., Cerbus, R. T. & Chakraborty, P., 8 9月 2016, 於: Physical Review Letters. 117, 11, 114502.

研究成果: 雜誌貢獻 › 期刊論文 › 同行評審

6 引文斯高帕斯（Scopus）

Magnetic microparticle-polydimethylsiloxane composite for reversible microchannel bonding

Tsao, C. W. & Lee, Y. P., 2016, 於: Science and Technology of Advanced Materials. 17, 1, p. 2-11 10 p.

研究成果: 雜誌貢獻 › 期刊論文 › 同行評審

開啟存取

9 引文斯高帕斯（Scopus）

Mass production of LiAl alloys by the step-controlled casting process

Tsai, Y. C., Lee, S. L., Lin, C. K. & Suwandi, A., 5 6月 2016, 於: Materials and Design. 99, p. 102-106 5 p.

研究成果: 雜誌貢獻 › 期刊論文 › 同行評審

1 引文斯高帕斯（Scopus）

Mechanical behaviour of a granular solid and its contacting deformable structure under uni-axial compression - Part I: Joint DEM-FEM modelling and experimental validation

Chung, Y. C., Lin, C. K., Chou, P. H. & Hsiau, S. S., 22 4月 2016, 於: Chemical Engineering Science. 144, p. 404-420 17 p.

研究成果: 雜誌貢獻 › 期刊論文 › 同行評審

25 引文斯高帕斯（Scopus）

Mechanical behaviour of a granular solid and its contacting deformable structure under uni-axial compression-Part II: Multi-scale exploration of internal physical properties

Chung, Y. C., Lin, C. K. & Ai, J., 22 4月 2016, 於: Chemical Engineering Science. 144, p. 421-443 23 p.

研究成果: 雜誌貢獻 › 期刊論文 › 同行評審

4 引文斯高帕斯（Scopus）

Mechanical design and analysis of a proton exchange membrane fuel cell stack

Chung, T. T., Lin, C. T. & Shiu, H. R., 2 4月 2016, 於: Journal of the Chinese Institute of Engineers, Transactions of the Chinese Institute of Engineers,Series A/Chung-kuo Kung Ch'eng Hsuch K'an. 39, 3, p. 353-362 10 p.

研究成果: 雜誌貢獻 › 期刊論文 › 同行評審

5 引文斯高帕斯（Scopus）

Mechanically tunable aspheric lenses via additive manufacture of hanging elastomeric droplets for microscopic applications

Fuh, Y. K., Chen, P. W. & Lai, Z. H., 3 7月 2016, 於: Journal of Modern Optics. 63, 12, p. 1129-1135 7 p.

研究成果: 雜誌貢獻 › 期刊論文 › 同行評審

7 引文斯高帕斯（Scopus）

Modeling and Analyzing the Shearing of Aluminum Sheets by Using Ultrasonic Vibrations

Yeh, W. C., Chu, T. H. & Fuh, K. H., 1 8月 2016, 於: Journal of the Chinese Society of Mechanical Engineers, Transactions of the Chinese Institute of Engineers, Series C/Chung-Kuo Chi Hsueh Kung Ch'eng Hsuebo Pao. 37, 4, p. 343-350 8 p.

研究成果: 雜誌貢獻 › 期刊論文 › 同行評審

1 引文斯高帕斯（Scopus）

Nanoscale silicon surface-assisted laser desorption/ionization mass spectrometry: Environment stability and activation by simple vacuum oven desiccation

Tsao, C. W., Lin, Y. J., Chen, P. Y., Yang, Y. L. & Tan, S. H., 21 8月 2016, 於: Analyst. 141, 16, p. 4973-4981 9 p.

研究成果: 雜誌貢獻 › 期刊論文 › 同行評審

15 引文斯高帕斯（Scopus）

Near field sequentially electrospun three-dimensional piezoelectric fibers arrays for self-powered sensors of human gesture recognition

Fuh, Y. K. & Wang, B. S., 1 12月 2016, 於: Nano Energy. 30, p. 677-683 7 p.

研究成果: 雜誌貢獻 › 期刊論文 › 同行評審

42 引文斯高帕斯（Scopus）

Novel application of a Wii remote to measure spasticity with the pendulum test: Proof of concept

Yeh, C. H., Hung, C. Y., Wang, Y. H., Hsu, W. T., Chang, Y. C., Yeh, J. R., Lee, P. L., Hu, K., Kang, J. H. & Lo, M. T., 1 1月 2016, 於: Gait and Posture. 43, p. 70-75 6 p.

研究成果: 雜誌貢獻 › 期刊論文 › 同行評審

7 引文斯高帕斯（Scopus）

Numerical simulation of the oxygen concentration distribution in silicon melt for different crystal lengths during Czochralski growth with a transverse magnetic field

Chen, J. C., Chiang, P. Y., Nguyen, T. H. T., Hu, C., Chen, C. H. & Liu, C. C., 15 10月 2016, 於: Journal of Crystal Growth. 452, p. 6-11 6 p.

研究成果: 雜誌貢獻 › 期刊論文 › 同行評審

12 引文斯高帕斯（Scopus）

Numerical study of the migration of a silicone plug inside a capillary tube subjected to an unsteady wall temperature gradient

Le, T. L., Chen, J. C., Hwu, F. S. & Nguyen, H. B., 6月 2016, 於: International Journal of Heat and Mass Transfer. 97, p. 439-449 11 p.

研究成果: 雜誌貢獻 › 期刊論文 › 同行評審

9 引文斯高帕斯（Scopus）

On holo-hilbert spectral analysis: A full informational spectral representation for nonlinear and non-stationary data

Huang, N. E., Hu, K., Yang, A. C. C., Chang, H. C., Jia, D., Liang, W. K., Yeh, J. R., Kao, C. L., Juan, C. H., Peng, C. K., Meijer, J. H., Wang, Y. H., Long, S. R. & Wu, Z., 13 4月 2016, 於: Philosophical Transactions of the Royal Society A: Mathematical, Physical and Engineering Sciences. 374, 2065, 20150206.

研究成果: 雜誌貢獻 › 期刊論文 › 同行評審

開啟存取

60 引文斯高帕斯（Scopus）

Optimal synthesis of a spherical parallel mechanism for medical application

Essomba, T., Laribi, M. A., Zeghloul, S. & Poisson, G., 1 3月 2016, 於: Robotica. 34, 3, p. 671-686 16 p.

研究成果: 雜誌貢獻 › 期刊論文 › 同行評審

16 引文斯高帕斯（Scopus）

Optimization of lightweight structure and supporting bipod flexure for a space mirror

Chen, Y. C., Huang, B. K., You, Z. T., Chan, C. Y. & Huang, T. M., 20 12月 2016, 於: Applied Optics. 55, 36, p. 10382-10391 10 p.

研究成果: 雜誌貢獻 › 期刊論文 › 同行評審

33 引文斯高帕斯（Scopus）

Perovskite LSCM impregnated with vanadium pentoxide for high temperature carbon dioxide electrolysis

Zhang, X., Ye, L., Hu, J., Li, J., Jiang, W., Tseng, C. J. & Xie, K., 10 9月 2016, 於: Electrochimica Acta. 212, p. 32-40 9 p.

研究成果: 雜誌貢獻 › 期刊論文 › 同行評審

27 引文斯高帕斯（Scopus）

Prior sheet buckling leading to wrinkling formation in a gas forming a V-trough with wavy bottom

Lee, S., Tang, J. S. & Chu, C. L., 2016, 於: Journal of Manufacturing Processes. 21, p. 101-106 6 p.

研究成果: 雜誌貢獻 › 期刊論文 › 同行評審

5 引文斯高帕斯（Scopus）

Production of high-performance and improved-durability Pt-catalyst /support for proton-exchange-membrane fuel cells with pulsed laser deposition

Huang, T. W., Qayyum, H., Lin, G. R., Chen, S. Y. & Tseng, C. J., 19 5月 2016, 於: Journal of Physics D: Applied Physics. 49, 25, 255601.

研究成果: 雜誌貢獻 › 期刊論文 › 同行評審

10 引文斯高帕斯（Scopus）

Pulsed laser deposition of platinum nanoparticles as a catalyst for high-performance PEM fuel cells

Qayyum, H., Tseng, C. J., Huang, T. W. & Chen, S. Y., 22 11月 2016, 於: Catalysts. 6, 11, 180.

研究成果: 雜誌貢獻 › 期刊論文 › 同行評審

開啟存取

15 引文斯高帕斯（Scopus）

Quantifying Spasticity With Limited Swinging Cycles Using Pendulum Test Based on Phase Amplitude Coupling

Yeh, C. H., Young, H. W. V., Wang, C. Y., Wang, Y. H., Lee, P. L., Kang, J. H. & Lo, M. T., 10月 2016, 於: IEEE Transactions on Neural Systems and Rehabilitation Engineering. 24, 10, p. 1081-1088 8 p., 7393838.

研究成果: 雜誌貢獻 › 期刊論文 › 同行評審

15 引文斯高帕斯（Scopus）

Recognition of depression and protrusion features on B-rep models based on virtual loops

Lai, J. Y., Wang, M. H., Chiu, Y. K., Hsu, C. H., Tsai, Y. C. & Huang, C. Y., 2 1月 2016, 於: Computer-Aided Design and Applications. 13, 1, p. 95-107 13 p.

研究成果: 雜誌貢獻 › 期刊論文 › 同行評審

開啟存取

8 引文斯高帕斯（Scopus）

Recognition of virtual loops on 3D CAD models based on the B-rep model

Lai, J. Y., Wang, M. H., You, Z. W., Chiu, Y. K., Hsu, C. H., Tsai, Y. C. & Huang, C. Y., 1 10月 2016, 於: Engineering with Computers. 32, 4, p. 593-606 14 p.

研究成果: 雜誌貢獻 › 期刊論文 › 同行評審

6 引文斯高帕斯（Scopus）

機械工程學系

研究成果

搜尋結果