機械工程學系

2020

Moving Object Detection through Image Bit-Planes Representation without Thresholding

Lin, C. Y., Muchtar, K., Lin, W. Y. & Jian, Z. Y., 4月 2020, 於: IEEE Transactions on Intelligent Transportation Systems. 21, 4, p. 1404-1414 11 p., 8694958.

研究成果: 雜誌貢獻 › 期刊論文 › 同行評審

Multi-objective Optimization of a Reconfigurable Spherical Parallel Mechanism for Tele-Operated Craniotomy

Essomba, T., Sandoval, J., Laribi, M. A. & Zeghloul, S., 2020, 於: Mechanisms and Machine Science. 78, p. 454-464 11 p.

研究成果: 雜誌貢獻 › 期刊論文 › 同行評審

2 引文斯高帕斯（Scopus）

New algorithms to estimate electron temperature and electron density with contaminated DC Langmuir probe onboard CubeSat

Jiang, S. B., Yeh, T. L., Liu, J. Y., Chao, C. K., Chang, L. C., Chen, L. W., Chou, C. J., Chi, Y. J., Chen, Y. L. & Chiang, C. K., 1 7月 2020, 於: Advances in Space Research. 66, 1, p. 148-161 14 p.

研究成果: 雜誌貢獻 › 期刊論文 › 同行評審

4 引文斯高帕斯（Scopus）

Nonlinear Control of Two-Wheeled Robot Based on Novel Analysis and Design of SDRE Scheme

Lin, L. G. & Xin, M., 5月 2020, 於: IEEE Transactions on Control Systems Technology. 28, 3, p. 1140-1148 9 p., 8664452.

研究成果: 雜誌貢獻 › 期刊論文 › 同行評審

13 引文斯高帕斯（Scopus）

Numerical investigation of the forward and backward thermocapillary motion of a water droplet in a microchannel by two periodically activated heat sources

Le, T. L., Chen, J. C. & Nguyen, H. B., 2020, 於: Numerical Heat Transfer; Part A: Applications. 79, 2, p. 146-162 17 p.

研究成果: 雜誌貢獻 › 期刊論文 › 同行評審

4 引文斯高帕斯（Scopus）

Optimization of a Spherical Decoupled Mechanism for Neuro-Endoscopy Based on Experimental Kinematic Data

Essomba, T., Nguyen Vu, L. & Wu, C. T., 1 2月 2020, 於: Journal of Mechanics. 36, 1, p. 133-147 15 p.

研究成果: 雜誌貢獻 › 期刊論文 › 同行評審

開啟存取

1 引文斯高帕斯（Scopus）

Photoluminescent or blackened silicon surfaces synthesized with copper-assisted chemical etching: For energy applications

Kuo, K. H., Ku, W. H. & Lee, B. T. H., 17 1月 2020, 於: ECS Journal of Solid State Science and Technology. 9, 2, 024006.

研究成果: 雜誌貢獻 › 期刊論文 › 同行評審

開啟存取

3 引文斯高帕斯（Scopus）

Polymer microchannel and micromold surface polishing for rapid, low-quantity polydimethylsiloxane and thermoplastic microfluidic device fabrication

Tsao, C. W. & Wu, Z. K., 11月 2020, 於: Polymers. 12, 11, p. 1-15 15 p., 2574.

研究成果: 雜誌貢獻 › 期刊論文 › 同行評審

開啟存取

4 引文斯高帕斯（Scopus）

Pool Boiling Heat Transfer Enhanced by Fluorinated Graphene as Atomic Layered Modifiers

Su, C. Y., Yang, C. Y., Jhang, B. W., Hsieh, Y. L., Sin, Y. Y. & Huang, C. C., 4 3月 2020, 於: ACS Applied Materials and Interfaces. 12, 9, p. 10233-10239 7 p.

研究成果: 雜誌貢獻 › 期刊論文 › 同行評審

20 引文斯高帕斯（Scopus）

Predictions of undesirable air–sand flow behaviors in a dual fluidized bed cold flow system via a CFD full-loop model

Dinh, C. B., Hsiau, S. S., Su, C. Y., Tsai, M. Y., Chen, Y. S., Nguyen, H. B. & Wan, H. P., 1月 2020, 於: Journal of the Taiwan Institute of Chemical Engineers. 106, p. 159-168 10 p.

研究成果: 雜誌貢獻 › 期刊論文 › 同行評審

4 引文斯高帕斯（Scopus）

Recognition and simplification of holes in CAD models of an injection mold for mold flow analysis

Lai, J. Y., Song, P. P., Hsu, C. H. & Tsai, Y. C., 2020, 於: Computer-Aided Design and Applications. 17, 1, p. 88-107 20 p.

研究成果: 雜誌貢獻 › 期刊論文 › 同行評審

開啟存取

1 引文斯高帕斯（Scopus）

Reducing efficiency droop in (In,Ga)N/Gan light-emitting diodes by improving current spreading with electron-blocking layers of the same size as the N-pad

Pham, Q. H., Chen, J. C. & Nguyen, H. B., 2020, 於: Current Optics and Photonics. 4, 4, p. 380-390 11 p.

研究成果: 雜誌貢獻 › 期刊論文 › 同行評審

2 引文斯高帕斯（Scopus）

Segregation pattern of binary-size mixtures in a double-walled rotating drum

Chou, S. H., Sheng, L. T., Huang, W. J. & Hsiau, S. S., 1月 2020, 於: Advanced Powder Technology. 31, 1, p. 94-103 10 p.

研究成果: 雜誌貢獻 › 期刊論文 › 同行評審

8 引文斯高帕斯（Scopus）

Sequential Dual Attention Network for Rain Streak Removal in a Single Image

Lin, C. Y., Tao, Z., Xu, A. S., Kang, L. W. & Akhyar, F., 2020, 於: IEEE Transactions on Image Processing. 29, p. 9250-9265 16 p., 9206069.

研究成果: 雜誌貢獻 › 期刊論文 › 同行評審

Small-scale universality in the spectral structure of transitional pipe flows

Cerbus, R. T., Liu, C. C., Gioia, G. & Chakraborty, P., 24 1月 2020, 於: Science Advances. 6, 4, eaaw6256.

研究成果: 雜誌貢獻 › 期刊論文 › 同行評審

開啟存取

8 引文斯高帕斯（Scopus）

Theoretical and numerical investigations on resonant characteristics of two piezoelectric plates coupled with a finite fluid field

Huang, Y. H., Lin, Y. C., Liao, C. Y. & Jhuang, K. L., 1 12月 2020, 於: Archive of Applied Mechanics. 90, 12, p. 2775-2798 24 p.

研究成果: 雜誌貢獻 › 期刊論文 › 同行評審

3 引文斯高帕斯（Scopus）

The suitability of ultrasonic and megasonic cleaning of nanoscale patterns in ammonia hydroxide solutions for particle removal and feature damage

Chu, C. L., Lu, T. Y. & Fuh, Y. K., 2020, 於: Semiconductor Science and Technology. 35, 4, 045001.

研究成果: 雜誌貢獻 › 期刊論文 › 同行評審

開啟存取

8 引文斯高帕斯（Scopus）

Three-dimensional amorphous Ni−Cr alloy printing by electrochemical additive manufacturing

Tseng, Y. T., Lin, J. C., Shian-Ching Jang, J., Tsai, P. H., Ciou, Y. J. & Hwang, Y. R., 24 11月 2020, 於: ACS Applied Electronic Materials. 2, 11, p. 3538-3548 11 p.

研究成果: 雜誌貢獻 › 期刊論文 › 同行評審

10 引文斯高帕斯（Scopus）

Transfer2Depth: Dual Attention Network with Transfer Learning for Monocular Depth Estimation

Yeh, C. H., Huang, Y. P., Lin, C. Y. & Chang, C. Y., 2020, 於: IEEE Access. 8, p. 86081-86090 10 p., 9087902.

研究成果: 雜誌貢獻 › 期刊論文 › 同行評審

開啟存取

Transient behavior of a cantilever plate subjected to impact loading: Theoretical analysis and experimental measurement

Liao, C. Y. & Ma, C. C., 15 1月 2020, 於: International Journal of Mechanical Sciences. 166, 105217.

研究成果: 雜誌貢獻 › 期刊論文 › 同行評審

11 引文斯高帕斯（Scopus）

Using six sigma to improve yield rates in liquid crystal display products: A case study

Chen, P. S., Chen, G. Y. H., Chen, C. F., Tai, C. P., Chen, J. C. M., Huang, W. T. & Peng, Y. C., 12月 2020, 於: Journal of Technology. 35, 4, p. 189-203 15 p.

研究成果: 雜誌貢獻 › 期刊論文 › 同行評審

Wavelength-modulated standing-wave interferometry for small out-of-plane displacement measurement

Lee, J. Y. & Hung, C. T., 4月 2020, 於: Optics and Laser Technology. 124, 105967.

研究成果: 雜誌貢獻 › 期刊論文 › 同行評審

1 引文斯高帕斯（Scopus）

工業機器人應用於手機微小螺絲自動鎖附之實現

Lu, J. C., Tung, P. C. & Lee, A. C., 12月 2020, 於: Journal of the Chinese Society of Mechanical Engineers, Transactions of the Chinese Institute of Engineers, Series C/Chung-Kuo Chi Hsueh Kung Ch'eng Hsuebo Pao. 41, 6, p. 735-744 10 p.

研究成果: 雜誌貢獻 › 期刊論文 › 同行評審

2019

3D printed acoustic metamaterials with microscale gaps as sound-absorbing mask for the patients of Tourette syndrome

Hsueh, C. W., Liao, C. C., Zhong, T. Y., Su, J. Z., Hsueh-Er, C. & Fuh, Y. K., 4 2月 2019, 於: Microsystem Technologies. 25, 2, p. 551-559 9 p.

研究成果: 雜誌貢獻 › 期刊論文 › 同行評審

4 引文斯高帕斯（Scopus）

A fully encapsulated piezoelectric-triboelectric hybrid nanogenerator for energy harvesting from biomechanical and environmental sources

Chen, C. Y., Tsai, C. Y., Xu, M. H., Wu, C. T., Huang, C. Y., Lee, T. H. & Fuh, Y. K., 6月 2019, 於: Express Polymer Letters. 13, 6, p. 533-542 10 p.

研究成果: 雜誌貢獻 › 期刊論文 › 同行評審

開啟存取

19 引文斯高帕斯（Scopus）

Alternative SDRE Scheme for Planar Systems

Lin, L. G. & Xin, M., 6月 2019, 於: IEEE Transactions on Circuits and Systems II: Express Briefs. 66, 6, p. 998-1002 5 p., 8454478.

研究成果: 雜誌貢獻 › 期刊論文 › 同行評審

4 引文斯高帕斯（Scopus）

A Minimum Arclength Method for Removing Spikes in Empirical Mode Decomposition

Yang, H. W., Jeng, S. K., Young, H. W. V., Lin, C., Wang, Y. H., Hu, K. & Lo, M. T., 2019, 於: IEEE Access. 7, p. 13284-13294 11 p., 8610129.

研究成果: 雜誌貢獻 › 期刊論文 › 同行評審

開啟存取

10 引文斯高帕斯（Scopus）

Annihilating Pores in the Desired Layer of a Porous Silicon Bilayer with Different Porosities for Layer Transfer

Chiang, C. C. & Lee, B. T. H., 1 12月 2019, 於: Scientific Reports. 9, 1, 12631.

研究成果: 雜誌貢獻 › 期刊論文 › 同行評審

開啟存取

7 引文斯高帕斯（Scopus）

A novel non-negative matrix factorization technique for decomposition of Chinese characters with application to secret sharing

Lin, C. Y., Kang, L. W., Huang, T. Y. & Chang, M. K., 1 12月 2019, 於: Eurasip Journal on Advances in Signal Processing. 2019, 1, 35.

研究成果: 雜誌貢獻 › 期刊論文 › 同行評審

開啟存取

A numerical solution for broadband PLC splitter with variable splitting ratio based on asymmetric three waveguide structures

Wang, H. T., Chen, C. F. & Chi, S., 1 5月 2019, 於: Applied Sciences (Switzerland). 9, 9, 1892.

研究成果: 雜誌貢獻 › 期刊論文 › 同行評審

開啟存取

8 引文斯高帕斯（Scopus）

A rapid granular chute avalanche impinging on a small fixed obstacle: DEM modeling, experimental validation and exploration of granular stress

Chung, Y. C., Wu, C. W., Kuo, C. Y. & Hsiau, S. S., 10月 2019, 於: Applied Mathematical Modelling. 74, p. 540-568 29 p.

研究成果: 雜誌貢獻 › 期刊論文 › 同行評審

17 引文斯高帕斯（Scopus）

A thermopile device with subwavelength structure by CMOS-MEMS technology

Shen, C. H., Yeh, Y. Y. & Chen, C. F., 1 12月 2019, 於: Applied Sciences (Switzerland). 9, 23, 5118.

研究成果: 雜誌貢獻 › 期刊論文 › 同行評審

開啟存取

5 引文斯高帕斯（Scopus）

Automatic recognition and suppression of holes on mold bases for finite element applications

Song, P. P., Lai, J. Y., Tsai, Y. C. & Hsu, C. H., 1 7月 2019, 於: Engineering with Computers. 35, 3, p. 925-944 20 p.

研究成果: 雜誌貢獻 › 期刊論文 › 同行評審

3 引文斯高帕斯（Scopus）

BIOMECHANICAL STUDY OF PEDICLE SCREW FIXATION STRENGTH: ASSOCIATION OF SCREW MALPOSITION AND SCREW INSERTION TORQUE

Tsai, T. T., Chen, Y. H., Liao, C. Y., Lin, H. T., Liu, M. Y., Chen, J. K., Lai, P. L. & Tai, C. L., 1 3月 2019, 於: Journal of Mechanics in Medicine and Biology. 19, 2, 1940012.

研究成果: 雜誌貢獻 › 期刊論文 › 同行評審

2 引文斯高帕斯（Scopus）

Burr hole craniotomy on cadavers for the design of teleoperated robot: Motion specifications and interaction forces

Essomba, T., Sandoval, J., Laribi, M. A., Wu, C. T., Breque, C., Zeghloul, S. & Richer, J. P., 2019, 於: International Journal of Mechanics and Control. 20, 2, p. 59-64 6 p.

研究成果: 雜誌貢獻 › 期刊論文 › 同行評審

3 引文斯高帕斯（Scopus）

Clean coal technology on hot gas clean-up process with a moving granular bed filter

Chen, Y. S., Hsiau, S. S., Syu, J. R. & Chang, Y. L., 15 7月 2019, 於: Fuel. 248, p. 136-142 7 p.

研究成果: 雜誌貢獻 › 期刊論文 › 同行評審

17 引文斯高帕斯（Scopus）

Computational fluid dynamics study of the effects of flow and geometry parameters on a linear-slit virtual impactor for sampling and concentrating aerosols

Chang, P. K., Hsiao, T. C., Engling, G. & Chen, J. C., 5月 2019, 於: Journal of Aerosol Science. 131, p. 28-40 13 p.

研究成果: 雜誌貢獻 › 期刊論文 › 同行評審

9 引文斯高帕斯（Scopus）

Correlation of impedance matching and optical emission spectroscopy during plasma-enhanced chemical vapor deposition of nanocrystalline silicon thin films

Kau, L. H., Huang, H. J., Chang, H. E., Hsieh, Y. L., Lee, C. C., Fuh, Y. K. & Li, T. T., 1 5月 2019, 於: Coatings. 9, 5, 305.

研究成果: 雜誌貢獻 › 期刊論文 › 同行評審

開啟存取

1 引文斯高帕斯（Scopus）

Creating waterfall animation on a single image

Lin, C. Y., Huang, Y. W. & Shih, T. K., 1 3月 2019, 於: Multimedia Tools and Applications. 78, 6, p. 6637-6653 17 p.

研究成果: 雜誌貢獻 › 期刊論文 › 同行評審

3 引文斯高帕斯（Scopus）

Deep learning and SURF for automated classification and detection of calcaneus fractures in CT images

Pranata, Y. D., Wang, K. C., Wang, J. C., Idram, I., Lai, J. Y., Liu, J. W. & Hsieh, I. H., 4月 2019, 於: Computer Methods and Programs in Biomedicine. 171, p. 27-37 11 p.

研究成果: 雜誌貢獻 › 期刊論文 › 同行評審

72 引文斯高帕斯（Scopus）

Deep learning-based firework video pattern classification

Kasthuri Arachchi, S. P., Shih, T. K., Lin, C. Y. & Wijayarathna, G., 2019, 於: Journal of Internet Technology. 20, 7, p. 2033-2042 10 p.

研究成果: 雜誌貢獻 › 期刊論文 › 同行評審

6 引文斯高帕斯（Scopus）

Deformation mechanism of forging tool for multi-stage forming of deep groove ball bearing

Liao, C. C., Hsu, C. C., Huang, J. H., Chen, W. C., Fuh, Y. K., Liao, C. A. & Chiu, H. Y., 1 3月 2019, 於: Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture. 233, 4, p. 1182-1195 14 p.

研究成果: 雜誌貢獻 › 期刊論文 › 同行評審

2 引文斯高帕斯（Scopus）

Development of a miniaturized rotational electromagnetic energy harvester with a liquid metal direct-write process

Feng, Y. Y., Chen, S. J. & Cheng, S. P., 15 8月 2019, 於: Sensors and Actuators, A: Physical. 295, p. 224-230 7 p.

研究成果: 雜誌貢獻 › 期刊論文 › 同行評審

13 引文斯高帕斯（Scopus）

Development of Mesh-Defect Removal Algorithm to Enhance the Fitting of 3D-Printed Parts for Comminuted Bone Fractures

Idram, I., Bintara, R. D., Lai, J. Y., Essomba, T. & Lee, P. Y., 1 12月 2019, 於: Journal of Medical and Biological Engineering. 39, 6, p. 855-873 19 p.

研究成果: 雜誌貢獻 › 期刊論文 › 同行評審

開啟存取

6 引文斯高帕斯（Scopus）

Dynamic hand gesture recognition using 3DCNN and LSTM with FSM context-aware model

Hakim, N. L., Shih, T. K., Arachchi, S. P. K., Aditya, W., Chen, Y. C. & Lin, C. Y., 2 12月 2019, 於: Sensors (Switzerland). 19, 24, 5429.

研究成果: 雜誌貢獻 › 期刊論文 › 同行評審

開啟存取

30 引文斯高帕斯（Scopus）

Dynamic modeling of a gear transmission system containing damping particles using coupled multi-body dynamics and discrete element method

Chung, Y. C. & Wu, Y. R., 1 10月 2019, 於: Nonlinear Dynamics. 98, 1, p. 129-149 21 p.

研究成果: 雜誌貢獻 › 期刊論文 › 同行評審

23 引文斯高帕斯（Scopus）

Effect of crucible and crystal rotations on the solute distribution in large size sapphire crystals during Czochralski growth

Nguyen, T. P. & Chen, J. C., 3月 2019, 於: International Journal of Heat and Mass Transfer. 130, p. 1307-1321 15 p.

研究成果: 雜誌貢獻 › 期刊論文 › 同行評審

Effect of the reactive surface area of proton-conducting Ni–Ba_0.8Sr_0.2Ce_0.6Zr_0.2Y_0.2O_3-δ anodes on cell performance

Hsu, K. T., Song, S. M., Tsai, P. H., Jang, J. S. C., Lin, J. C., Lee, S. W., Tseng, C. J., Hung, I. M. & Hsi, C. S., 15 8月 2019, 於: Ceramics International. 45, 12, p. 14524-14532 9 p.

研究成果: 雜誌貢獻 › 期刊論文 › 同行評審

1 引文斯高帕斯（Scopus）

Effects of aging treatment on the precipitation behavior of ε-Cu phase and mechanical properties of metal injection molding 17-4PH stainless steel

Chung, C. Y. & Tzeng, Y. C., 15 2月 2019, 於: Materials Letters. 237, p. 228-231 4 p.

研究成果: 雜誌貢獻 › 期刊論文 › 同行評審

28 引文斯高帕斯（Scopus）

Effects of electrode spark gap, differential diffusion, and turbulent dissipation on two distinct phenomena: Turbulent facilitated ignition versus minimum ignition energy transition

Shy, S. S., Nguyen, M. T. & Huang, S. Y., 7月 2019, 於: Combustion and Flame. 205, p. 371-377 7 p.

研究成果: 雜誌貢獻 › 期刊論文 › 同行評審

17 引文斯高帕斯（Scopus）

機械工程學系

研究成果

搜尋結果