機械工程學系

2023

A general mathematical modeling and finite element analysis of a strain wave gear possessing a double-circular-arc-with-a-common-tangent profile

Cheng, Y. H. & Chen, Y. C., 1月 2023, 於: Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science. 237, 1, p. 223-236 14 p.

研究成果: 雜誌貢獻 › 期刊論文 › 同行評審

1 引文斯高帕斯（Scopus）

An Improved Speed Estimation Using Deep Homography Transformation Regression Network on Monocular Videos

Yohannes, E., Lin, C. Y., Shih, K., Thaipisutikul, T., Enkhbat, A. & Utaminingrum, F., 2023, 於: IEEE Access. 11, p. 5955-5965 11 p.

研究成果: 雜誌貢獻 › 期刊論文 › 同行評審

開啟存取

A novel manufacturing method for double-enveloping worms using a whirl-machining process

Andrianto, M., Wu, Y. R. & Arifin, A., 1月 2023, 於: Mechanism and Machine Theory.

研究成果: 雜誌貢獻 › 期刊論文 › 同行評審

1 引文斯高帕斯（Scopus）

A novel model-based unbalance monitoring and prognostics for rotor-bearing systems

Lin, C. L., Liang, J. W., Huang, Y. M. & Huang, S. C., 1月 2023, 於: Advances in Mechanical Engineering. 15, 1

研究成果: 雜誌貢獻 › 期刊論文 › 同行評審

開啟存取

1 引文斯高帕斯（Scopus）

Controlling the heat, flow, and oxygen transport by double-partitions during continuous Czochralski (CCz) silicon crystal growth

Nguyen, T. H. T., Chen, J. C. & Li, C. H., 1 3月 2023, 於: Materials Science in Semiconductor Processing. 155, 107235.

研究成果: 雜誌貢獻 › 期刊論文 › 同行評審

1 引文斯高帕斯（Scopus）

Design evaluation of disk-type milling cutter with special inserts applying analytical simulation and the experimental verification in screw rotor milling

Arifin, A., Wu, Y. R. & Andrianto, M., 2月 2023, 於: Mechanism and Machine Theory. 180, 105128.

研究成果: 雜誌貢獻 › 期刊論文 › 同行評審

1 引文斯高帕斯（Scopus）

Development of new technology for tar removal in IGCC

Chen, Y. S., Hsiau, S. S., Liao, C. E. & Chou, S-H., 15 1月 2023, 於: Journal of Cleaner Production. 384, 135575.

研究成果: 雜誌貢獻 › 期刊論文 › 同行評審

Formation of subsurface Cu-O-Si system through laser-induced plasma-assisted copper penetration for fabricating robust adhesive copper wire on glass substrate

Wei, K., Lin, C. K., Tung, P. C., Ho, J. R. & Tsao, I. Y., 30 1月 2023, 於: Applied Surface Science. 609, 155149.

研究成果: 雜誌貢獻 › 期刊論文 › 同行評審

Hierarchical Image Transformation and Multi-Level Features for Anomaly Defect Detection

Farady, I., Kuo, C. C., Ng, H. F. & Lin, C. Y., 1月 2023, 於: Sensors (Switzerland). 23, 2, 988.

研究成果: 雜誌貢獻 › 期刊論文 › 同行評審

開啟存取

Investigation on the erosion and deposition process of granular collapse flow on an erodible inclined plane

Chou, S-H., Yang, S. J. & Hsiau, S. S., 15 1月 2023, 於: Powder Technology. 414, 118086.

研究成果: 雜誌貢獻 › 期刊論文 › 同行評審

1 引文斯高帕斯（Scopus）

Machining Characteristics of Diamond Grit-Coated Tools in Grinding-Aided ECDM

Hung, J. C. & Su, T. K., 2023, (已被接受) 於: Materials and Manufacturing Processes.

研究成果: 雜誌貢獻 › 期刊論文 › 同行評審

Microfluidic paper-based analytical devices for cancer diagnosis

Shalaby, A. A., Tsao, C. W., Ishida, A., Maeki, M. & Tokeshi, M., 15 3月 2023, 於: Sensors and Actuators, B: Chemical. 379, 133243.

研究成果: 雜誌貢獻 › 期刊論文 › 同行評審

Mobile Induction Heat Treatment of Large-Sized Spur Gear—The Effect of Scanning Speed and Air Gap on the Uniformity of Hardened Depth and Mechanical Properties

Saputro, I. E., Chen, C. P., Jheng, Y. S., Huang, H. C. & Fuh, Y. K., 3月 2023, 於: Steel Research International. 94, 3, 2200261.

研究成果: 雜誌貢獻 › 期刊論文 › 同行評審

Predicting residual stress of aluminum nitride thin-film by incorporating manifold learning and tree-based ensemble classifier

Chen, H. F., Yang, Y. P., Chen, W. L., Wang, P. J., Lai, W., Fuh, Y. K. & Li, T. T., 1 2月 2023, 於: Materials Chemistry and Physics. 295, 127070.

研究成果: 雜誌貢獻 › 期刊論文 › 同行評審

Preform design with increased materials utilization and processing map analysis for aluminum hot forging process

Fuh, Y. K., Shih, J. K., Saputro, I. E., Chen, C. P., Huang, C. F., Ku, H. Y. & Chan, C. W., 24 3月 2023, 於: Journal of Manufacturing Processes. 90, p. 14-27 14 p.

研究成果: 雜誌貢獻 › 期刊論文 › 同行評審

Product quality prediction in pulsed laser cutting of silicon steel sheet using vibration signals and deep neural network

Kusuma, A. I. & Huang, Y. M., 4月 2023, 於: Journal of Intelligent Manufacturing. 34, 4, p. 1683-1699 17 p.

研究成果: 雜誌貢獻 › 期刊論文 › 同行評審

5 引文斯高帕斯（Scopus）

2022

A Comparison and Analysis of Three Methods of Aluminum Crown Forgings in Processing Optimization

Chen, C. P., Su, H. Z., Shih, J. K., Huang, C. F., Ku, H. Y., Chan, C. W., Li, T. T. & Fuh, Y. K., 12月 2022, 於: Materials. 15, 23, 8400.

研究成果: 雜誌貢獻 › 期刊論文 › 同行評審

開啟存取

1 引文斯高帕斯（Scopus）

A deep feature-level fusion model for masked face identity recommendation system

Thaipisutikul, T., Tatiyamaneekul, P., Lin, C. Y. & Tuarob, S., 2022, (已被接受) 於: Journal of Ambient Intelligence and Humanized Computing.

研究成果: 雜誌貢獻 › 期刊論文 › 同行評審

開啟存取

A Deep Learning Method for Foot Progression Angle Detection in Plantar Pressure Images

Ardhianto, P., Subiakto, R. B. R., Lin, C. Y., Jan, Y. K., Liau, B. Y., Tsai, J. Y., Akbari, V. B. H. & Lung, C. W., 1 4月 2022, 於: Sensors (Switzerland). 22, 7, 2786.

研究成果: 雜誌貢獻 › 期刊論文 › 同行評審

開啟存取

A Hybrid PSO–GWO Fuzzy Logic Controller with a New Fuzzy Tuner

Nguyen, D. T., Ho, J. R., Tung, P. C. & Lin, C. K., 4月 2022, 於: International Journal of Fuzzy Systems. 24, 3, p. 1586-1604 19 p.

研究成果: 雜誌貢獻 › 期刊論文 › 同行評審

1 引文斯高帕斯（Scopus）

A hybrid sensor for motor tics recognition based on piezoelectric and triboelectric design and fabrication

Wang, J., Chen, C. C., Shie, C. Y., Li, T. T. & Fuh, Y. K., 1 8月 2022, 於: Sensors and Actuators, A: Physical. 342, 113622.

研究成果: 雜誌貢獻 › 期刊論文 › 同行評審

2 引文斯高帕斯（Scopus）

All directional nanogenerators (NGs) with a highly flexible and near field electrospun concentrically aligned nano/micro P(VDF-TrFE) fibers

Xu, M. H., Shie, C. Y., Chen, C. C., Kwan Kwan, Y., Lo, W. C., Chen, H. F., Lin, Y. H. & Fuh, Y. K., 11月 2022, 於: Microsystem Technologies. 28, 11, p. 2549-2560 12 p.

研究成果: 雜誌貢獻 › 期刊論文 › 同行評審

Analytical design of disk-type milling cutter with multiple inserts and CNC milling simulation of screw rotors considering grinding stock

Achmad, A. & Wu, Y. R., 4月 2022, 於: Mechanism and Machine Theory. 170, 104724.

研究成果: 雜誌貢獻 › 期刊論文 › 同行評審

5 引文斯高帕斯（Scopus）

Analytical solution for the vibration characteristics of a partially immersed plate with experimental investigation on wet mode shapes

Chen, G. W., Liao, C. Y., Lin, Y. Z., Lee, K. T. & Ma, C. C., 11月 2022, 於: Applied Mathematical Modelling. 111, p. 1-43 43 p.

研究成果: 雜誌貢獻 › 期刊論文 › 同行評審

1 引文斯高帕斯（Scopus）

An analytical method to control and predict grinding textures on modified gear tooth flanks in CNC generating gear grinding

Yang, Y. C., Wu, Y. R. & Tsai, T. M., 11月 2022, 於: Mechanism and Machine Theory. 177, 105023.

研究成果: 雜誌貢獻 › 期刊論文 › 同行評審

1 引文斯高帕斯（Scopus）

An experimental study of the influence of Lewis number on turbulent flame speed at different pressures

Lipatnikov, A. N., Chen, Y. R. & Shy, S. S., 2022, (已被接受) 於: Proceedings of the Combustion Institute.

研究成果: 雜誌貢獻 › 期刊論文 › 同行評審

1 引文斯高帕斯（Scopus）

A novel approach to attain tooth flanks with variable pressure and helical angles utilizing the same cutter in the CNC gear skiving process

Luu, T. T. & Wu, Y. R., 11月 2022, 於: International Journal of Advanced Manufacturing Technology. 123, 3-4, p. 875-902 28 p.

研究成果: 雜誌貢獻 › 期刊論文 › 同行評審

1 引文斯高帕斯（Scopus）

A novel correction method to attain even grinding allowance in CNC gear skiving process

Luu, T. T. & Wu, Y. R., 5月 2022, 於: Mechanism and Machine Theory. 171, 104771.

研究成果: 雜誌貢獻 › 期刊論文 › 同行評審

3 引文斯高帕斯（Scopus）

A novel dry processing technique to construct a high-performance superfine diamond grinding wheel with thermal and material characterizations

Huang, H. C., Ho, C. C., Fuh, Y. K. & Li, T. T., 10月 2022, 於: Journal of Manufacturing Processes. 82, p. 765-776 12 p.

研究成果: 雜誌貢獻 › 期刊論文 › 同行評審

A numerical study of the effect of pulse duration on preventing particle generation during the AlN pulsed MOCVD process

Lin, W. J. & Chen, J. C., 9月 2022, 於: Materials Science in Semiconductor Processing. 148, 106816.

研究成果: 雜誌貢獻 › 期刊論文 › 同行評審

1 引文斯高帕斯（Scopus）

A Transition of Ignition Kernel Delay Time at the Early Stages of Lean Premixed n-Butane/Air Turbulent Spherical Flame Propagation

Nguyen, M. T. & Shy, S., 1 4月 2022, 於: Applied Sciences (Switzerland). 12, 8, 3914.

研究成果: 雜誌貢獻 › 期刊論文 › 同行評審

開啟存取

Boundary Effects for EMD-Based Algorithms

Wang, Y. H. & Cheng, S. H., 2022, 於: IEEE Signal Processing Letters. 29, p. 1032-1036 5 p.

研究成果: 雜誌貢獻 › 期刊論文 › 同行評審

3 引文斯高帕斯（Scopus）

Can kinematic variables deduce functional scales among chronic stroke survivors? A proof of concept for inertial sensors

Han, S. L., Cai, M. L., Yang, H. H., Yang, Y. C. & Pan, M. C., 4 5月 2022, 於: Sensor Review. 42, 3, p. 316-325 10 p.

研究成果: 雜誌貢獻 › 期刊論文 › 同行評審

Can the phenomenon of turbulence facilitated ignition through differential diffusion occur in laser-induced spark ignition?

Chen, Y. R. & Shy, S. S., 8月 2022, 於: Combustion and Flame. 242, 112165.

研究成果: 雜誌貢獻 › 期刊論文 › 同行評審

Carbon resistant Ni_1-xCu_x-BCZY anode for methane-fed protonic ceramic fuel cell

Cheng, P. C., Lee, S. W., Lee, K. R., Setiawan, N., Bhavanari, M., Shen, C. T., Osman, N. & Tseng, C. J., 8 4月 2023, 於: International Journal of Hydrogen Energy. 48, 30, p. 11455-11462 8 p.

研究成果: 雜誌貢獻 › 期刊論文 › 同行評審

Comparison and Verification of Dynamic Simulations and Experiments for a Modified Spur Gear Pair

Wang, Z. G., Lo, C. C. & Chen, Y. C., 3月 2022, 於: Machines. 10, 3, 191.

研究成果: 雜誌貢獻 › 期刊論文 › 同行評審

開啟存取

1 引文斯高帕斯（Scopus）

Computer-Aided Engineering (CAE) Simulation for the Robust Gating System Design: Improved Process for Investment Casting Defects of 316L Stainless Steel Valve Housing

Kao, Y. C., Ho, M. H., Tseng, H. W., Huang, C. F., Lee, S. C., Chan, C. W. & Fuh, Y. K., 10月 2022, 於: International Journal of Metalcasting. 16, 4, p. 2014-2032 19 p.

研究成果: 雜誌貢獻 › 期刊論文 › 同行評審

3 引文斯高帕斯（Scopus）

Controller Design for Unstable Time-Delay Systems with Unknown Transfer Functions

Tsai, H. H., Fuh, C. C., Ho, J. R., Lin, C. K. & Tung, P. C., 1 2月 2022, 於: Mathematics. 10, 3, 431.

研究成果: 雜誌貢獻 › 期刊論文 › 同行評審

開啟存取

1 引文斯高帕斯（Scopus）

Control of self-organization of drop-casted Nafion film for improving proton conduction in a polymer-electrolyte-membrane fuel cell to raise its output power density

Lin, C. H., Chen, H. H., Zhan, K. Y., Chen, S. Y. & Tseng, C. J., 2022, (已被接受) 於: International Journal of Hydrogen Energy.

研究成果: 雜誌貢獻 › 期刊論文 › 同行評審

Decomposition of protrusion features on thin-shell parts for mold flow analysis

Song, P. P., Putrayudanto, P., Wu, T. Y., Lai, J. Y., Tsai, Y. C., Wang, M. H. & Hsu, C. H., 2022, (已被接受) 於: Engineering with Computers.

研究成果: 雜誌貢獻 › 期刊論文 › 同行評審

Deep Learning in Left and Right Footprint Image Detection Based on Plantar Pressure

Ardhianto, P., Liau, B. Y., Jan, Y. K., Tsai, J. Y., Akhyar, F., Lin, C. Y., Subiakto, R. B. R. & Lung, C. W., 9月 2022, 於: Applied Sciences (Switzerland). 12, 17, 8885.

研究成果: 雜誌貢獻 › 期刊論文 › 同行評審

開啟存取

Design, analysis, and optimization of a strain wave gear with a novel tooth profile

Cheng, Y. H. & Chen, Y. C., 9月 2022, 於: Mechanism and Machine Theory. 175, 104953.

研究成果: 雜誌貢獻 › 期刊論文 › 同行評審

1 引文斯高帕斯（Scopus）

Development of a Multicolor 3D Printer Using a Novel Filament Shifting Mechanism

Hai, V. N. T., Phu, S. N., Essomba, T. & Lai, J. Y., 6月 2022, 於: Inventions. 7, 2, 34.

研究成果: 雜誌貢獻 › 期刊論文 › 同行評審

開啟存取

Discovery and study of abrasion behavior in granular shear flow

Hsiau, S. S., Hutter, K., Lu, L. S., Teufel, A., Chou, S-H. & Sheng, L-T., 2022, 於: Journal of Mechanics. 38, p. 367-375 9 p.

研究成果: 雜誌貢獻 › 期刊論文 › 同行評審

開啟存取

Dynamic Modeling, Optimization and Experiment for a High-Speed Spur Gear Set

Wang, Z. G., Lo, C. C., Chen, Y. C. & Liu, H. C., 8月 2022, 於: Machines. 10, 8, 653.

研究成果: 雜誌貢獻 › 期刊論文 › 同行評審

開啟存取

Dynamic positioning of remotely operated vessel based on novel analysis and design of SDRE scheme

Lin, L. G., 1 6月 2022, 於: Ocean Engineering. 253, 111186.

研究成果: 雜誌貢獻 › 期刊論文 › 同行評審

開啟存取

Effect of phosphoric acid and perchloric acid on Electropolishing of additive manufactured 17-4 PH stainless steel and its characterization

Lee, C. Y., Ger, M. D., Hung, J. C., Yang, P. J., Ferng, Y. C., Jen, K. K. & Jian, S. Y., 2022, 於: International Journal of Electrochemical Science. 17, 220315.

研究成果: 雜誌貢獻 › 期刊論文 › 同行評審

1 引文斯高帕斯（Scopus）

Effect of sand particle size on the hydrodynamics of a dual fluidized bed cold flow system applied for waste-to-energy gasifiers

Dinh, C. B., Hsiau, S. S., Su, C. Y. & Wan, H. P., 25 10月 2022, 於: International Journal of Energy Research. 46, 13, p. 18976-18995 20 p.

研究成果: 雜誌貢獻 › 期刊論文 › 同行評審

Effect of various inserts on flow behavior of Fe₂O₃ beads in a three-dimensional silo subjected to cyclic discharge- Part I: Exploration of transport properties

Chung, Y., Kuo, T. C. & Hsiau, S. S., 3月 2022, 於: Powder Technology. 400, 117220.

研究成果: 雜誌貢獻 › 期刊論文 › 同行評審

2 引文斯高帕斯（Scopus）

Effect of various inserts on flow behavior of Fe₂O₃ beads in a three-dimensional silo subjected to cyclic discharge- Part II: Exploration of internal dynamic properties

Liao, C. C., Chung, Y. C. & Kuo, T. C., 2月 2022, 於: Powder Technology. 399, 117221.

研究成果: 雜誌貢獻 › 期刊論文 › 同行評審

1 引文斯高帕斯（Scopus）

機械工程學系

研究成果

搜尋結果