機械工程學系

篩選
會議論文篇章

搜尋結果

  • 2014

    Optical-electrical-thermal effect on efficiency droop in large size light emitting diode chips

    Chen, J. C., Hsiao, C. P. & Hwu, F. S., 25 11月 2014, Optics for Solar Energy, OSE 2014. Optical Society of America (OSA), (Optics for Solar Energy, OSE 2014).

    研究成果: 書貢獻/報告類型會議論文篇章同行評審

  • Optical-Electrical-Thermal Effect on Efficiency Droop in Large Size Light Emitting Diode Chips

    Chen, J. C., Hsiao, C. P. & Hwu, F. S., 2014, Optical Nanostructures and Advanced Materials for Photovoltaics, PVLED 2014. Optica Publishing Group (formerly OSA), JW6A.36. (Optics InfoBase Conference Papers).

    研究成果: 書貢獻/報告類型會議論文篇章同行評審

  • SOS-based fuzzy stability analysis via homogeneous Lyapunov functions

    Lo, J. C., Lin, Y. T., Chang, W. S. & Lin, F. Y., 4 9月 2014, Proceedings of the 2014 IEEE International Conference on Fuzzy Systems, FUZZ-IEEE. Institute of Electrical and Electronics Engineers Inc., p. 2300-2305 6 p. 6891652. (IEEE International Conference on Fuzzy Systems).

    研究成果: 書貢獻/報告類型會議論文篇章同行評審

    13 引文 斯高帕斯(Scopus)
  • Structural analysis of a tracking photovoltaic system with a pedestal solar tracker

    Lin, C. K. & Dai, C. Y., 2014, Advances in Applied Mechanics and Materials. p. 361-366 6 p. (Applied Mechanics and Materials; 卷 493).

    研究成果: 書貢獻/報告類型會議論文篇章同行評審

  • The preliminary research of drill guide template design for pedicle screw placement with a low-cost 3D pinter

    Liao, C. Y., Cheng, C. J., Huang, W. J. & Cheng, C. M., 2014, Advances in Applied Mechanics and Materials. p. 507-510 4 p. (Applied Mechanics and Materials; 卷 493).

    研究成果: 書貢獻/報告類型會議論文篇章同行評審

  • Thermal stress intensity factors of crack in solid oxide fuel cells

    Anam, K. & Lin, C. K., 2014, Advances in Applied Mechanics and Materials. p. 331-336 6 p. (Applied Mechanics and Materials; 卷 493).

    研究成果: 書貢獻/報告類型會議論文篇章同行評審

    4 引文 斯高帕斯(Scopus)
  • 2013

    Abandoned object detection in complicated environments

    Muchtar, K., Lin, C. Y., Kang, L. W. & Yeh, C. H., 2013, 2013 Asia-Pacific Signal and Information Processing Association Annual Summit and Conference, APSIPA 2013. 6694206. (2013 Asia-Pacific Signal and Information Processing Association Annual Summit and Conference, APSIPA 2013).

    研究成果: 書貢獻/報告類型會議論文篇章同行評審

    4 引文 斯高帕斯(Scopus)
  • Adaptive resource allocation for OFDM-based Single-relay cooperative communication systems over rayleigh fading channels

    Chang, C. W., Lai, H. J., Pan, T. S., Wu, Y. C., Huang, C. L., Tsui, H. P., Ho, C. P. & Chen, C. H., 2013, Proceedings - 2013 2nd International Conference on Robot, Vision and Signal Processing, RVSP 2013. IEEE Computer Society, p. 214-219 6 p. 6830016. (Proceedings - 2013 2nd International Conference on Robot, Vision and Signal Processing, RVSP 2013).

    研究成果: 書貢獻/報告類型會議論文篇章同行評審

    2 引文 斯高帕斯(Scopus)
  • Adaptive temperature set point of air handling units using fuzzy logics

    Chen, H. C. & Lu, C. H., 2013, Innovation for Applied Science and Technology. p. 2361-2366 6 p. (Applied Mechanics and Materials; 卷 284-287).

    研究成果: 書貢獻/報告類型會議論文篇章同行評審

  • A guidance law design using the combination of ISMC and SDRE schemes

    Liang, Y. W., Chen, J. Y. & Lin, L. G., 2013, ICSSE 2013 - IEEE International Conference on System Science and Engineering, Proceedings. p. 63-67 5 p. 6614634. (ICSSE 2013 - IEEE International Conference on System Science and Engineering, Proceedings).

    研究成果: 書貢獻/報告類型會議論文篇章同行評審

    3 引文 斯高帕斯(Scopus)
  • A highly directional light emitting diode light guide bar based on concave V-grooves

    Chen, C. F., Lin, B. H. & Kuo, S. H., 2013, Advanced Designs and Researches for Manufacturing. p. 2019-2022 4 p. (Advanced Materials Research; 卷 605-607).

    研究成果: 書貢獻/報告類型會議論文篇章同行評審

  • Alternative displacement sensor with reflection type holographic grating

    Ho, Y. Y., Lin, Z. R., Hsu, C. C., Wu, C. C. & Lee, J. Y., 2013, International Conference on Optics in Precision Engineering and Nanotechnology, icOPEN 2013. 87693K. (Proceedings of SPIE - The International Society for Optical Engineering; 卷 8769).

    研究成果: 書貢獻/報告類型會議論文篇章同行評審

  • Analysis of structural deformation and concentrator misalignment in a roll-tilt solar tracker

    Lin, C. K. & Fang, J. Y., 2013, 9th International Conference on Concentrator Photovoltaic Systems, CPV 2013. Araki, K., Dimroth, F. & Anton, I. (編輯). American Institute of Physics Inc., p. 210-213 4 p. (AIP Conference Proceedings; 卷 1556).

    研究成果: 書貢獻/報告類型會議論文篇章同行評審

    開啟存取
    6 引文 斯高帕斯(Scopus)
  • An improved method for image thresholding based on the valley-emphasis method

    Ng, H. F., Jargalsaikhan, D., Tsai, H. C. & Lin, C. Y., 2013, 2013 Asia-Pacific Signal and Information Processing Association Annual Summit and Conference, APSIPA 2013. 6694261. (2013 Asia-Pacific Signal and Information Processing Association Annual Summit and Conference, APSIPA 2013).

    研究成果: 書貢獻/報告類型會議論文篇章同行評審

    20 引文 斯高帕斯(Scopus)
  • A novel liquid cooling system for high power LED street lamp

    Yang, C. Y., Liu, W. C., Yeh, C. T. & Tsai, S. N., 2013, 29th Annual IEEE Semiconductor Thermal Measurement and Management Symposium, SEMI-THERM 2013 - Proceedings. p. 151-153 3 p. 6526820. (Annual IEEE Semiconductor Thermal Measurement and Management Symposium).

    研究成果: 書貢獻/報告類型會議論文篇章同行評審

    7 引文 斯高帕斯(Scopus)
  • Cross-camera complementary vehicle matching via feature expandsion for video forensics

    Hsu, C. Y., Lin, C. Y., Kang, L. W. & Liao, H. Y. M., 2013, 2013 IEEE 17th International Symposium on Consumer Electronics, ISCE 2013. p. 211-212 2 p. 6570190. (Proceedings of the International Symposium on Consumer Electronics, ISCE).

    研究成果: 書貢獻/報告類型會議論文篇章同行評審

  • Curvature analysis and Hertzian contact stress of a modified curvilinear gear set with localized bearing contact

    Chen, Y. C., Lo, C. C. & Chen, W. C., 2013, 25th International Conference on Design Theory and Methodology; ASME 2013 Power Transmission and Gearing Conference. American Society of Mechanical Engineers, V005T11A027. (Proceedings of the ASME Design Engineering Technical Conference; 卷 5).

    研究成果: 書貢獻/報告類型會議論文篇章同行評審

    2 引文 斯高帕斯(Scopus)
  • Design and analysis of an air/electric hybrid system

    Hwang, Y. R. & Huang, S. Y., 2013, 18th Design for Manufacturing and the Life Cycle Conference; 2013 ASME/IEEE International Conference on Mechatronic and Embedded Systems and Applications. American Society of Mechanical Engineers, V004T08A044. (Proceedings of the ASME Design Engineering Technical Conference; 卷 4).

    研究成果: 書貢獻/報告類型會議論文篇章同行評審

  • Design and analysis of isostatic mounts on a spaceborne lightweight primary mirror

    Chan, C. Y., Chen, Y. C., Chang, S. T., Huang, T. M. & Hsu, M. Y., 2013, Optomechanical Engineering 2013. 88360K. (Proceedings of SPIE - The International Society for Optical Engineering; 卷 8836).

    研究成果: 書貢獻/報告類型會議論文篇章同行評審

    8 引文 斯高帕斯(Scopus)
  • Effect of acid etching durations on surface roughness and residual stresses of lightweight glass ceramic

    Chan, C. Y., Chen, Y. C., Yang, C. R. & Huang, T. M., 2013, Innovation for Applied Science and Technology. p. 77-82 6 p. (Applied Mechanics and Materials; 卷 284-287).

    研究成果: 書貢獻/報告類型會議論文篇章同行評審

  • Effects of chemical and physical shear-stress stimulation of human placenta-derived multipotent stem cells in microchannel

    Tsao, C. W., Chiang, M. Z. & Cheng, Y. C., 2013, ASME 2013 11th International Conference on Nanochannels, Microchannels and Minichannels, ICNMM 2013. V001T10A008. (ASME 2013 11th International Conference on Nanochannels, Microchannels and Minichannels, ICNMM 2013).

    研究成果: 書貢獻/報告類型會議論文篇章同行評審

    2 引文 斯高帕斯(Scopus)
  • High accuracy sun-tracking using CCD and field test for PV system

    Wu, J. C. & Lin, W. C., 2013, 9th International Conference on Concentrator Photovoltaic Systems, CPV 2013. Araki, K., Dimroth, F. & Anton, I. (編輯). American Institute of Physics Inc., p. 214-217 4 p. (AIP Conference Proceedings; 卷 1556).

    研究成果: 書貢獻/報告類型會議論文篇章同行評審

    開啟存取
    3 引文 斯高帕斯(Scopus)
  • Identification and tracking of players in sport videos

    Lu, C. W., Lin, C. Y., Hsu, C. Y., Weng, M. F., Kang, L. W. & Liao, H. Y. M., 2013, ICIMCS 2013 - Proceedings of the 5th International Conference on Internet Multimedia Computing and Service. p. 113-116 4 p. (ACM International Conference Proceeding Series).

    研究成果: 書貢獻/報告類型會議論文篇章同行評審

    25 引文 斯高帕斯(Scopus)
  • Improved antireflection property of subwavelength structures based on finite difference time domain method

    Chen, C. F., Cheng, Y. C. & Ting, C. J., 2013, Mechanical Automation and Materials Engineering. p. 780-784 5 p. (Applied Mechanics and Materials; 卷 364).

    研究成果: 書貢獻/報告類型會議論文篇章同行評審

  • Light distribution function application in LED direct backlight unit

    Chen, C. F. & Kuo, S. H., 2013, 2013 10th China International Forum on Solid State Lighting, ChinaSSL 2013. Institute of Electrical and Electronics Engineers Inc., p. 263-266 4 p. 7177365. (2013 10th China International Forum on Solid State Lighting, ChinaSSL 2013).

    研究成果: 書貢獻/報告類型會議論文篇章同行評審

  • Measurement verification of line smoothness and surface roughness of micro products fabricated by two-photon polymerization

    Chung, T. T., Hung, C. P., Tseng, C. L., Lin, C. T. & Baldeck, P. L., 2013, Eighth International Symposium on Precision Engineering Measurements and Instrumentation. 87595A. (Proceedings of SPIE - The International Society for Optical Engineering; 卷 8759).

    研究成果: 書貢獻/報告類型會議論文篇章同行評審

  • Non-liner learning for mixture of Gaussians

    Lin, C. Y., Liu, P. H., Muindisi, T., Yeh, C. H. & Su, P. C., 2013, 2013 Asia-Pacific Signal and Information Processing Association Annual Summit and Conference, APSIPA 2013. 6694204. (2013 Asia-Pacific Signal and Information Processing Association Annual Summit and Conference, APSIPA 2013).

    研究成果: 書貢獻/報告類型會議論文篇章同行評審

  • Numerical and experimental analysis of flexible pin mechanisms for load balancing in planetary gear drives

    Yeh, H. Y., Tsai, S. J. & Yu, Y. Y., 2013, 25th International Conference on Design Theory and Methodology; ASME 2013 Power Transmission and Gearing Conference. American Society of Mechanical Engineers, V005T11A046. (Proceedings of the ASME Design Engineering Technical Conference; 卷 5).

    研究成果: 書貢獻/報告類型會議論文篇章同行評審

  • Optical emission spectroscopy studies in ECR plasma used for the deposition of silicon oxide film

    Hsieh, Y. L., Chang, S. Y., Li, T. T., Hu, L. C., Lee, C. C., Chang, J. Y., Chen, I. C., Chu, Y. H., Lee, J. Y. & Wang, S. H., 2013, China Semiconductor Technology International Conference 2013, CSTIC 2013. 1 編輯 p. 473-481 9 p. (ECS Transactions; 卷 52, 編號 1).

    研究成果: 書貢獻/報告類型會議論文篇章同行評審

    3 引文 斯高帕斯(Scopus)
  • Polynomial fuzzy-model-based control systems: Stability analysis via RHS copositive relaxation

    Lo, J. C., Lin, F. Y. & Yang, G. C., 2013, FUZZ-IEEE 2013 - 2013 IEEE International Conference on Fuzzy Systems. 6622353. (IEEE International Conference on Fuzzy Systems).

    研究成果: 書貢獻/報告類型會議論文篇章同行評審

    2 引文 斯高帕斯(Scopus)
  • Processing map for hot deformation of homogenized AZ61 Mg alloy

    Liao, C. H., Wu, H. Y., Lee, S., Wu, C. T. & Chiu, C. H., 2013, Materials Science and Technology II. p. 240-243 4 p. (Advanced Materials Research; 卷 716).

    研究成果: 書貢獻/報告類型會議論文篇章同行評審

  • Real-time people counting method with surveillance cameras implemented on embedded system

    Chen, H. C., Chang, Y. C., Li, N. J., Weng, C. F. & Wang, W. J., 2013, WCECS 2013 - World Congress on Engineering and Computer Science 2013. Newswood Limited, p. 512-515 4 p. (Lecture Notes in Engineering and Computer Science; 卷 1).

    研究成果: 書貢獻/報告類型會議論文篇章同行評審

    2 引文 斯高帕斯(Scopus)
  • Recent advances in two-photon 3D laser lithography with self-Qswitched Nd:YAG microchip lasers

    Baldeck, P. L., Prabakharan, P., Liu, C. Y., Bouriau, M., Gredy, L., Stephan, O., Vergote, T., Chaumeil, H., Malval, J. P., Lee, Y. H., Lin, C. L., Lin, C. T., Hsueh, Y. H. & Chung, T. T., 2013, Optical Processes in Organic Materials and Nanostructures II. 88270E. (Proceedings of SPIE - The International Society for Optical Engineering; 卷 8827).

    研究成果: 書貢獻/報告類型會議論文篇章同行評審

    4 引文 斯高帕斯(Scopus)
  • Relaxed stabilization of T-S fuzzy systems with time-delay

    Tsai, S. H., Sun, C., Lo, J. C. & Lam, H. K., 2013, FUZZ-IEEE 2013 - 2013 IEEE International Conference on Fuzzy Systems. 6622448. (IEEE International Conference on Fuzzy Systems).

    研究成果: 書貢獻/報告類型會議論文篇章同行評審

    4 引文 斯高帕斯(Scopus)
  • Self-authentication mechanism with recovery ability for digital images

    Chen, Y. H., Lin, C. Y. & Sirakriengkrai, W., 2013, Proceedings - 2013 7th International Conference on Complex, Intelligent, and Software Intensive Systems, CISIS 2013. p. 299-304 6 p. 6603904. (Proceedings - 2013 7th International Conference on Complex, Intelligent, and Software Intensive Systems, CISIS 2013).

    研究成果: 書貢獻/報告類型會議論文篇章同行評審

    1 引文 斯高帕斯(Scopus)
  • Simulation of thermal-optical effects on a PMMA fresnel lens used in solar concentrators

    Chen, Y. C. & Su, C. H., 2013, Innovation for Applied Science and Technology. p. 2840-2844 5 p. (Applied Mechanics and Materials; 卷 284-287).

    研究成果: 書貢獻/報告類型會議論文篇章同行評審

  • Study on ultrasonic vibration in gas and optimization of a novel process of EDM

    Lin, Y. C., Chow, H. M., Tsui, H. P. & Chen, Y. F., 2013, Advanced Research on Industry, Information System and Material Engineering. p. 365-369 5 p. (Advanced Materials Research; 卷 675).

    研究成果: 書貢獻/報告類型會議論文篇章同行評審

    4 引文 斯高帕斯(Scopus)
  • Switching-type self-tuning fuzzy PID control of an active magnetic bearing system

    Chen, K. Y., Tung, P. C. & Fan, Y. H., 2013, Innovation for Applied Science and Technology. p. 2330-2336 7 p. (Applied Mechanics and Materials; 卷 284-287).

    研究成果: 書貢獻/報告類型會議論文篇章同行評審

    4 引文 斯高帕斯(Scopus)
  • The optimization of thermal flow field in a large-size MOCVD reactor

    Hu, C. K., Li, T. T. & Lin, Y. J., 2013, China Semiconductor Technology International Conference 2013, CSTIC 2013. 1 編輯 p. 1021-1026 6 p. (ECS Transactions; 卷 52, 編號 1).

    研究成果: 書貢獻/報告類型會議論文篇章同行評審

    開啟存取
    2 引文 斯高帕斯(Scopus)
  • The people number estimation based on the embedded DSP system with surveillance camera

    Li, N. J., Weng, C. F., Wang, W. J., Chen, H. C. & Lee, P. J., 2013, ICSSE 2013 - IEEE International Conference on System Science and Engineering, Proceedings. p. 57-61 5 p. 6614633. (ICSSE 2013 - IEEE International Conference on System Science and Engineering, Proceedings).

    研究成果: 書貢獻/報告類型會議論文篇章同行評審

    5 引文 斯高帕斯(Scopus)
  • Visualization of boiling heat transfer on micro porous coated surface in confined space

    Yang, C. Y. & Liu, C. F., 2013, ASME 2013 11th International Conference on Nanochannels, Microchannels and Minichannels, ICNMM 2013. V001T04A010. (ASME 2013 11th International Conference on Nanochannels, Microchannels and Minichannels, ICNMM 2013).

    研究成果: 書貢獻/報告類型會議論文篇章同行評審

    2 引文 斯高帕斯(Scopus)
  • 2012

    A continuous shear deflection function for articular cartilage

    Motavalli, M., Chung, C. Y., Schluchter, M. & Mansour, J. M., 2012, ASME 2012 Summer Bioengineering Conference, SBC 2012. p. 713-714 2 p. (ASME 2012 Summer Bioengineering Conference, SBC 2012).

    研究成果: 書貢獻/報告類型會議論文篇章同行評審

    2 引文 斯高帕斯(Scopus)
  • A glucose sensor fabricated on glass substrate with glucose oxidase immobilized technique

    Wu, T. C., Lin, T. Q., Hsu, C. C. & Lee, J. Y., 2012, 2012 Proceedings of SICE Annual Conference, SICE 2012. Society of Instrument and Control Engineers (SICE), p. 979-981 3 p. 6318583. (Proceedings of the SICE Annual Conference).

    研究成果: 書貢獻/報告類型會議論文篇章同行評審

  • A novel optical sheet with microstructures design in the LED direct-lit backlight module

    Chen, C. F., Lu, L. M. & Jhou, Y. F., 2012, Mechanical and Electronics Engineering III. p. 4106-4109 4 p. (Applied Mechanics and Materials; 卷 130-134).

    研究成果: 書貢獻/報告類型會議論文篇章同行評審

    5 引文 斯高帕斯(Scopus)
  • A study on the inner wall spiral polishing with magnetic force

    Chen, W. C. & Yan, B. H., 2012, Advanced Manufacturing Focusing on Multi-Disciplinary Technologies. p. 243-248 6 p. (Advanced Materials Research; 卷 579).

    研究成果: 書貢獻/報告類型會議論文篇章同行評審

    1 引文 斯高帕斯(Scopus)
  • A two-phase model for dry density-varying granular flows over general topography

    Tai, Y. C., Kuo, C. Y., Shen, L. T. & Hsiau, S. S., 2012, Landslides and Engineered Slopes: Protecting Society through Improved Understanding - Proceedings of the 11th International and 2nd North American Symposium on Landslides and Engineered Slopes, 2012. Eberhardt, E., Froese, C., Turner, A. K. & Leroueil, S. (編輯). CRC Press/Balkema, p. 1679-1685 7 p. (Landslides and Engineered Slopes: Protecting Society through Improved Understanding - Proceedings of the 11th International and 2nd North American Symposium on Landslides and Engineered Slopes, 2012; 卷 2).

    研究成果: 書貢獻/報告類型會議論文篇章同行評審

  • Background subtraction by modeling pixel and neighborhood information

    Jiang, S. J. F., Muchtar, K., Lin, C. Y., Kang, L. W. & Yeh, C. H., 2012, 2012 Conference Handbook - Asia-Pacific Signal and Information Processing Association Annual Summit and Conference, APSIPA ASC 2012. 6411857. (2012 Conference Handbook - Asia-Pacific Signal and Information Processing Association Annual Summit and Conference, APSIPA ASC 2012).

    研究成果: 書貢獻/報告類型會議論文篇章同行評審

    1 引文 斯高帕斯(Scopus)
  • Behavior of a proton exchange membrane fuel cell in reformate gas

    Chen, C. Y., Chen, C. C., Hsu, S. W., Lai, M. P., Lai, W. H. & Yang, W. M., 2012, WHEC 2012 Conference Proceedings - 19th World Hydrogen Energy Conference. Elsevier Ltd, p. 64-71 8 p. (Energy Procedia; 卷 29).

    研究成果: 書貢獻/報告類型會議論文篇章同行評審

    開啟存取
    8 引文 斯高帕斯(Scopus)
  • Bone defect detection on dental osseointegration using structural mode shape

    Hsieh, Y. S., Chen, J. Z., Chen, C. S., Lee, S. Y. & Pan, M. C., 2012, 24th Conference on Mechanical Vibration and Noise. PARTS A AND B 編輯 American Society of Mechanical Engineers (ASME), p. 201-205 5 p. (Proceedings of the ASME Design Engineering Technical Conference; 卷 1, 編號 PARTS A AND B).

    研究成果: 書貢獻/報告類型會議論文篇章同行評審

  • Communication security using a combination of steganographic system and empirical mode decomposition

    Lu, K. Y., Hsu, W. T., Tung, P. C., Tseng, C. J., Huang, N. E. & Lin, S. L., 2012, Innovation in Materials Science and Emerging Technology. p. 149-153 5 p. (Applied Mechanics and Materials; 卷 145).

    研究成果: 書貢獻/報告類型會議論文篇章同行評審