機械工程學系

2015

Investigation of a-SiOx:H films as passivation layer in heterojunction interface

Yeh, C. H., Chu, Y. H., Lee, C. C., Hsieh, Y. L., Liu, S. M., Chang, J. Y., Chen, I. C. & Li, T. T., 8 7月 2015, China Semiconductor Technology International Conference 2015, CSTIC 2015. Claeys, C., Lin, Q., Huang, D., Wu, H., Huang, R., Lai, K., Zhang, Y., Zhang, B., Wu, K., Chen, L., Liang, S., Song, P., Lung, H.-L., Chen, D. & Wang, Q. (編輯). Institute of Electrical and Electronics Engineers Inc., 7153397. (China Semiconductor Technology International Conference 2015, CSTIC 2015).

研究成果: 書貢獻/報告類型 › 會議論文篇章 › 同行評審

1 引文斯高帕斯（Scopus）

Investigation of surface plasmon enhanced organic light emitting diode by numerical analysis

Yang, W. J., Hu, C. K. & Li, T. T., 8 7月 2015, China Semiconductor Technology International Conference 2015, CSTIC 2015. Claeys, C., Lin, Q., Huang, D., Wu, H., Huang, R., Lai, K., Zhang, Y., Zhang, B., Wu, K., Chen, L., Liang, S., Song, P., Lung, H.-L., Chen, D. & Wang, Q. (編輯). Institute of Electrical and Electronics Engineers Inc., 7153469. (China Semiconductor Technology International Conference 2015, CSTIC 2015).

研究成果: 書貢獻/報告類型 › 會議論文篇章 › 同行評審

1 引文斯高帕斯（Scopus）

Loaded tooth contact analysis of cycloid planetary gear drives

Tsai, S. J., Huang, C. H., Yeh, H. Y. & Huang, W. J., 2015, 2015 IFToMM World Congress Proceedings, IFToMM 2015. National Taiwan University, (2015 IFToMM World Congress Proceedings, IFToMM 2015).

研究成果: 書貢獻/報告類型 › 會議論文篇章 › 同行評審

10 引文斯高帕斯（Scopus）

Loaded tooth contact analysis of power-split gear drives considering shaft deformation and assembly errors

Ye, S. Y. & Tsai, S. J., 2015, ASME 2015 Power Transmission and Gearing Conference; 23rd Reliability, Stress Analysis, and Failure Prevention Conference. American Society of Mechanical Engineers (ASME), (Proceedings of the ASME Design Engineering Technical Conference; 卷 10).

研究成果: 書貢獻/報告類型 › 會議論文篇章 › 同行評審

6 引文斯高帕斯（Scopus）

Magnetic nanoparticle embedded polydimethylsiloxane layer for reversible microfluidic bonding

Lee, Y. P. & Tsao, C. W., 2015, MicroTAS 2015 - 19th International Conference on Miniaturized Systems for Chemistry and Life Sciences. Chemical and Biological Microsystems Society, p. 1392-1394 3 p. (MicroTAS 2015 - 19th International Conference on Miniaturized Systems for Chemistry and Life Sciences).

研究成果: 書貢獻/報告類型 › 會議論文篇章 › 同行評審

Mammogram incorporated DOI with transmission and reflection parallel scanning

Yu, J. M., Chen, L. Y., Pan, M. C., Sun, S. Y., Chou, C. C. & Pan, M. C., 2015, Multimodal Biomedical Imaging X. Azar, F. S. & Intes, X. (編輯). SPIE, 931602. (Progress in Biomedical Optics and Imaging - Proceedings of SPIE; 卷 9316).

研究成果: 書貢獻/報告類型 › 會議論文篇章 › 同行評審

Modeling and development of tension force measurement system for cable-driven hand exoskeleton robot

Pu, S. W., Chang, H. T. & Chang, J. Y., 25 8月 2015, AIM 2015 - 2015 IEEE/ASME International Conference on Advanced Intelligent Mechatronics. Institute of Electrical and Electronics Engineers Inc., p. 635-640 6 p. 7222608. (IEEE/ASME International Conference on Advanced Intelligent Mechatronics, AIM; 卷 2015-August).

研究成果: 書貢獻/報告類型 › 會議論文篇章 › 同行評審

5 引文斯高帕斯（Scopus）

Modelling of granular solid-structure interaction: A comparative study using conventional FEM approach and linked DEM-FEM approach

Ai, J., Lin, C. K. & Chung, Y. C., 2015, Recent Development in Machining, Materials and Mechanical Technologies. Chen, J.-C., Hiroshi, U., Lee, S.-W. & Fuh, Y.-K. (編輯). Trans Tech Publications Ltd, p. 520-525 6 p. (Key Engineering Materials; 卷 656-657).

研究成果: 書貢獻/報告類型 › 會議論文篇章 › 同行評審

Nanostructured silicon coupled with iron oxide magnetic nanoparticles as enhanced desorption/ionization on silicon mass spectrometry for phosphopeptide analysis

Tsao, C. W., Chen, W. Y., Lin, C. H. & Cheng, Y. C., 2015, NSTI: Advanced Materials - TechConnect Briefs 2015. Romanowicz, B. & Laudon, M. (編輯). Taylor and Francis Inc., p. 34-38 5 p. (NSTI: Advanced Materials - TechConnect Briefs 2015; 卷 1).

研究成果: 書貢獻/報告類型 › 會議論文篇章 › 同行評審

Numerical analysis for the growth of epitaxy layer in a large-size MOCVD reactor

Hu, C. K., Chien, H. I. & Li, T. T., 2015, Recent Development in Machining, Materials and Mechanical Technologies. Chen, J.-C., Hiroshi, U., Lee, S.-W. & Fuh, Y.-K. (編輯). Trans Tech Publications Ltd, p. 515-519 5 p. (Key Engineering Materials; 卷 656-657).

研究成果: 書貢獻/報告類型 › 會議論文篇章 › 同行評審

2 引文斯高帕斯（Scopus）

Numerical analysis for thermal field of susceptor in MOCVD reactor

Ho, K. H., Hu, C. K. & Li, T. T., 8 7月 2015, China Semiconductor Technology International Conference 2015, CSTIC 2015. Lin, Q., Zhang, B., Chen, L., Lung, H.-L., Lai, K., Chen, D., Zhang, Y., Huang, D., Wu, K., Claeys, C., Liang, S., Huang, R., Song, P., Wu, H. & Wang, Q. (編輯). Institute of Electrical and Electronics Engineers Inc., 7153470. (China Semiconductor Technology International Conference 2015, CSTIC 2015).

研究成果: 書貢獻/報告類型 › 會議論文篇章 › 同行評審

On the development of blend faces and holes recognition algorithm for CAE applications

Lai, J. Y., You, Z. W., Chiu, Y. K., Wang, M. H., Hsu, C. H., Tsai, Y. C. & Huang, C. Y., 2015, Recent Development in Machining, Materials and Mechanical Technologies. Chen, J.-C., Hiroshi, U., Lee, S.-W. & Fuh, Y.-K. (編輯). Trans Tech Publications Ltd, p. 789-794 6 p. (Key Engineering Materials; 卷 656-657).

研究成果: 書貢獻/報告類型 › 會議論文篇章 › 同行評審

8 引文斯高帕斯（Scopus）

On the development of virtual inner loops for feature recognition

Wang, M. H., Lai, J. Y., Chiu, Y. K., Hsu, C. H., Tsai, Y. C. & Huang, C. Y., 2015, Recent Development in Machining, Materials and Mechanical Technologies. Chen, J.-C., Hiroshi, U., Lee, S.-W. & Fuh, Y.-K. (編輯). Trans Tech Publications Ltd, p. 761-767 7 p. (Key Engineering Materials; 卷 656-657).

研究成果: 書貢獻/報告類型 › 會議論文篇章 › 同行評審

3 引文斯高帕斯（Scopus）

Optimization study on the primary mirror lightweighting of a remote sensing instrument

Chan, C. Y., Huang, B. K., You, Z. T., Chen, Y. C. & Huang, T. M., 2015, International Conference on Optical and Photonic Engineering, icOPEN 2015. Fu, Y. & Asundi, A. K. (編輯). SPIE, 95240T. (Proceedings of SPIE - The International Society for Optical Engineering; 卷 9524).

研究成果: 書貢獻/報告類型 › 會議論文篇章 › 同行評審

3 引文斯高帕斯（Scopus）

Optimum design of a new craniotomy robotic manipulator based on experimental motion and force analyses in real craniotomy environment

Essomba, T., Wu, C. T., Lee, S. T. & Kuo, C. H., 2015, 2015 IFToMM World Congress Proceedings, IFToMM 2015. National Taiwan University, (2015 IFToMM World Congress Proceedings, IFToMM 2015).

研究成果: 書貢獻/報告類型 › 會議論文篇章 › 同行評審

1 引文斯高帕斯（Scopus）

Plasma diagnostics of resonance magnetic field effects on a-Si:H thin films deposition using electron cyclotron resonance plasma

Hu, L. C., Lin, Y. W., Wang, C. J., Wei, T. C., Yang, C. R., Lee, C. C., Chang, J. Y., Chen, I. C. & Li, T. T., 8 7月 2015, China Semiconductor Technology International Conference 2015, CSTIC 2015. Claeys, C., Lin, Q., Huang, D., Wu, H., Huang, R., Lai, K., Zhang, Y., Zhang, B., Wu, K., Chen, L., Liang, S., Song, P., Lung, H.-L., Chen, D. & Wang, Q. (編輯). Institute of Electrical and Electronics Engineers Inc., 7153464. (China Semiconductor Technology International Conference 2015, CSTIC 2015).

研究成果: 書貢獻/報告類型 › 會議論文篇章 › 同行評審

Rain removal using single image based on non-negative matrix factorization

Liu, P. H., Lin, C. Y., Yeh, C. H., Kang, L. W., Lo, K. S. H., Hwang, T. H. & Kuo, C. C., 2015, Intelligent Systems and Applications - Proceedings of the International Computer Symposium, ICS 2014. Chu, W.C.-C., Chao, H.-C. & Yang, S.J.-H. (編輯). IOS Press BV, p. 1137-1146 10 p. (Frontiers in Artificial Intelligence and Applications; 卷 274).

研究成果: 書貢獻/報告類型 › 會議論文篇章 › 同行評審

1 引文斯高帕斯（Scopus）

Reconstruction of DOI with geometrical mismatch between physical and computational models

Chen, L. Y., Pan, M. C. & Pan, M. C., 2015, 1st Global Conference on Biomedical Engineering and 9th Asian-Pacific Conference on Medical and Biological Engineering. Su, F.-C., Yeh, M.-L. & Wang, S.-H. (編輯). Springer Verlag, p. 147-149 3 p. (IFMBE Proceedings; 卷 47).

研究成果: 書貢獻/報告類型 › 會議論文篇章 › 同行評審

Rotor load analysis method for twin Screw compressors with considering gaseous pressure and working temperature

Hsu, R. H., Wu, Y. R., Wu, W. T. & Tran, V. T., 2015, 2015 IFToMM World Congress Proceedings, IFToMM 2015. National Taiwan University, (2015 IFToMM World Congress Proceedings, IFToMM 2015).

研究成果: 書貢獻/報告類型 › 會議論文篇章 › 同行評審

Simulation of cracking behavior in planar solid oxide fuel cell during thermal cycling

Anam, K., Lin, C. K. & Purnowidodo, A., 2015, Recent Development in Machining, Materials and Mechanical Technologies. Chen, J.-C., Hiroshi, U., Lee, S.-W. & Fuh, Y.-K. (編輯). Trans Tech Publications Ltd, p. 484-489 6 p. (Key Engineering Materials; 卷 656-657).

研究成果: 書貢獻/報告類型 › 會議論文篇章 › 同行評審

Simulation of interfacial cracking of the joint between glass-ceramic sealant and metallic interconnect in a planar solid oxide fuel cell stack

Lin, C. K., Shiu, W. H., Wu, S. H. & Lee, R. Y., 2015, Solid Oxide Fuel Cells 14, SOFC 2015. Eguchi, K. & Singhal, S. C. (編輯). 1 編輯 Electrochemical Society Inc., p. 2981-2990 10 p. (ECS Transactions; 卷 68, 編號 1).

研究成果: 書貢獻/報告類型 › 會議論文篇章 › 同行評審

1 引文斯高帕斯（Scopus）

Single image rain removal based on part-based model

Yeh, C. H., Liu, P. H., Yu, C. E. & Lin, C. Y., 20 8月 2015, 2015 IEEE International Conference on Consumer Electronics - Taiwan, ICCE-TW 2015. Institute of Electrical and Electronics Engineers Inc., p. 462-463 2 p. 7216999. (2015 IEEE International Conference on Consumer Electronics - Taiwan, ICCE-TW 2015).

研究成果: 書貢獻/報告類型 › 會議論文篇章 › 同行評審

4 引文斯高帕斯（Scopus）

Study the relationship of stable lobes diagram and roughness

Lin, C. T., Hsu, L. Y. & Peng, T. J., 2015, 2015 IFToMM World Congress Proceedings, IFToMM 2015. National Taiwan University, (2015 IFToMM World Congress Proceedings, IFToMM 2015).

研究成果: 書貢獻/報告類型 › 會議論文篇章 › 同行評審

The dependence of ECR-CVD processing parameters on deposition uniformity of hydrogenated amorphous silicon (a-Si:H) films

Hu, L. C., Li, Y. S., Lee, C. C., Cheng, J. Y., Chen, I. C. & Li, T. T., 2015, Recent Development in Machining, Materials and Mechanical Technologies. Chen, J.-C., Hiroshi, U., Lee, S.-W. & Fuh, Y.-K. (編輯). Trans Tech Publications Ltd, p. 92-100 9 p. (Key Engineering Materials; 卷 656-657).

研究成果: 書貢獻/報告類型 › 會議論文篇章 › 同行評審

The impact of pressurization on anode-supported and electrolyte-supported planar solid oxide fuel cells at 750°C ∼ 850°C

Shy, S. S., Hsieh, Y. D. & Liang, J. D., 2015, Solid Oxide Fuel Cells 14, SOFC 2015. Eguchi, K. & Singhal, S. C. (編輯). 1 編輯 Electrochemical Society Inc., p. 2169-2178 10 p. (ECS Transactions; 卷 68, 編號 1).

研究成果: 書貢獻/報告類型 › 會議論文篇章 › 同行評審

1 引文斯高帕斯（Scopus）

The optimization of the high-temperature heat source for a MOCVD vacuum reactor

Chiu, H. C., Hu, C. K., Chien, H. I., Li, T. T. & Tung, P. C., 8 7月 2015, China Semiconductor Technology International Conference 2015, CSTIC 2015. Claeys, C., Lin, Q., Huang, D., Wu, H., Huang, R., Lai, K., Zhang, Y., Zhang, B., Wu, K., Chen, L., Liang, S., Song, P., Lung, H.-L., Chen, D. & Wang, Q. (編輯). Institute of Electrical and Electronics Engineers Inc., 7153475. (China Semiconductor Technology International Conference 2015, CSTIC 2015).

研究成果: 書貢獻/報告類型 › 會議論文篇章 › 同行評審

Theoretical modeling and fabrication of two-dimensional microstructures by using micro-anode-guided electroplating with real-time image processing

Ciou, Y. J., Hwang, Y. R. & Lin, J. C., 2015, Recent Development in Machining, Materials and Mechanical Technologies. Chen, J.-C., Hiroshi, U., Lee, S.-W. & Fuh, Y.-K. (編輯). Trans Tech Publications Ltd, p. 604-614 11 p. (Key Engineering Materials; 卷 656-657).

研究成果: 書貢獻/報告類型 › 會議論文篇章 › 同行評審

6 引文斯高帕斯（Scopus）

The suppression effect of 830 nm laser irradiation on porous silicon formation

Chiang, C. C., Huang, Y. C., Juan, P. C., Lo, F. S. & Lee, T. H., 2015, Nanoscale Electrochemistry. Ito, T. & Kusoglu, A. (編輯). 35 編輯 Electrochemical Society Inc., p. 1-7 7 p. (ECS Transactions; 卷 69, 編號 35).

研究成果: 書貢獻/報告類型 › 會議論文篇章 › 同行評審

Thin-film growth rate monitor by normal-incidence reflectance

Huang, F. R., Chen, X. D., Wang, C. C. & Lee, J. Y., 2015, Recent Development in Machining, Materials and Mechanical Technologies. Chen, J.-C., Hiroshi, U., Lee, S.-W. & Fuh, Y.-K. (編輯). Trans Tech Publications Ltd, p. 107-112 6 p. (Key Engineering Materials; 卷 656-657).

研究成果: 書貢獻/報告類型 › 會議論文篇章 › 同行評審

Time-varying load analysis on the rotor-bearing system for twin-screw compressors

Wu, Y. R. & Chi, J. W., 2015, Precision Engineering and Nanotechnology V. Trans Tech Publications Ltd, p. 274-281 8 p. (Key Engineering Materials; 卷 625).

研究成果: 書貢獻/報告類型 › 會議論文篇章 › 同行評審

2 引文斯高帕斯（Scopus）

Variation of the dynamic characteristics and machining stability of a milling tool with feeding orientation

Wu, K. D., Chen, Y. J., Lin, C. T. & Hung, J. P., 2015, 2015 IFToMM World Congress Proceedings, IFToMM 2015. National Taiwan University, (2015 IFToMM World Congress Proceedings, IFToMM 2015).

研究成果: 書貢獻/報告類型 › 會議論文篇章 › 同行評審

Vision-based detection of steel billet surface defects via fusion of multiple image features

Hsu, C. Y., Kang, L. W., Lin, C. Y., Yeh, C. H. & Lin, C. T., 2015, Intelligent Systems and Applications - Proceedings of the International Computer Symposium, ICS 2014. Chu, W.C.-C., Chao, H.-C. & Yang, S.J.-H. (編輯). IOS Press BV, p. 1239-1247 9 p. (Frontiers in Artificial Intelligence and Applications; 卷 274).

研究成果: 書貢獻/報告類型 › 會議論文篇章 › 同行評審

3 引文斯高帕斯（Scopus）

Wavelength optimization of spectral near-infrared optical tomography using available laser diodes

Pan, M. C., Chen, L. Y., Yan, C. C. & Pan, M. C., 2015, 7th WACBE World Congress on Bioengineering, 2015. Lim, C. T. & Goh, J. (編輯). Springer Verlag, p. 202-205 4 p. (IFMBE Proceedings; 卷 52).

研究成果: 書貢獻/報告類型 › 會議論文篇章 › 同行評審

2014

A highly efficiency flashlight module based on modified fresnel lens

Chen, C. F. & Kuo, S. H., 2014, 2014 11th China International Forum on Solid State Lighting, SSLCHINA 2014. Institute of Electrical and Electronics Engineers Inc., p. 150-153 4 p. 7127244. (2014 11th China International Forum on Solid State Lighting, SSLCHINA 2014).

研究成果: 書貢獻/報告類型 › 會議論文篇章 › 同行評審

1 引文斯高帕斯（Scopus）

A highly efficiency LED portable desk lamp based on V-groove cells LGP

Chen, C. F. & Kuo, S. H., 2014, Optical Design and Testing VI. Du, C., Sasian, J., Wang, Y. & Tatsuno, K. (編輯). SPIE, 92721W. (Proceedings of SPIE - The International Society for Optical Engineering; 卷 9272).

研究成果: 書貢獻/報告類型 › 會議論文篇章 › 同行評審

An adaptive-window-based image dehazing method

Lin, G. S., Nguyen, M. T., Yeh, C. H. & Lin, C. Y., 12 2月 2014, 2014 Asia-Pacific Signal and Information Processing Association Annual Summit and Conference, APSIPA 2014. Institute of Electrical and Electronics Engineers Inc., 7041765. (2014 Asia-Pacific Signal and Information Processing Association Annual Summit and Conference, APSIPA 2014).

研究成果: 書貢獻/報告類型 › 會議論文篇章 › 同行評審

Appropriate IMFs associated with cepstrum and envelope analysis for ball-bearing fault diagnosis

Tsao, W. C. & Pan, M. C., 2014, Active and Passive Smart Structures and Integrated Systems 2014. SPIE, 905737. (Proceedings of SPIE - The International Society for Optical Engineering; 卷 9057).

研究成果: 書貢獻/報告類型 › 會議論文篇章 › 同行評審

1 引文斯高帕斯（Scopus）

Comparative study of leaf image recognition with a novel learning-based approach

Hsiao, J. K., Kang, L. W., Chang, C. L. & Lin, C. Y., 7 10月 2014, Proceedings of 2014 Science and Information Conference, SAI 2014. Institute of Electrical and Electronics Engineers Inc., p. 389-393 5 p. 6918216. (Proceedings of 2014 Science and Information Conference, SAI 2014).

研究成果: 書貢獻/報告類型 › 會議論文篇章 › 同行評審

31 引文斯高帕斯（Scopus）

Computer assisted fracture reduction and fixation simulation for pelvic fractures

Lee, P. Y., Lai, J. Y., Huang, C. Y. & Hu, Y. S., 2014, Advances in Applied Mechanics and Materials. p. 354-360 7 p. (Applied Mechanics and Materials; 卷 493).

研究成果: 書貢獻/報告類型 › 會議論文篇章 › 同行評審

2 引文斯高帕斯（Scopus）

Design of secondary optical element for a two-reflector solar concentrator

Chen, Y. C. & You, C. C., 2014, Applied Science and Precision Engineering Innovation. p. 161-165 5 p. (Applied Mechanics and Materials; 卷 479-480).

研究成果: 書貢獻/報告類型 › 會議論文篇章 › 同行評審

1 引文斯高帕斯（Scopus）

Dynamic simulation and analysis of large-scale gear reducers

Hou, H. C. & Wu, Y. R., 2014, Advances in Materials and Processing Technologies XVI. Trans Tech Publications, p. 530-538 9 p. (Advanced Materials Research; 卷 939).

研究成果: 書貢獻/報告類型 › 會議論文篇章 › 同行評審

Electromagnetic energy harvester with an in-phase vibration bandwidth broadening technique

Chen, S. J., Wu, J. Y. & Liu, S. Y., 2014, MEMS 2014 - 27th IEEE International Conference on Micro Electro Mechanical Systems. Institute of Electrical and Electronics Engineers Inc., p. 382-384 3 p. 6765656. (Proceedings of the IEEE International Conference on Micro Electro Mechanical Systems (MEMS)).

研究成果: 書貢獻/報告類型 › 會議論文篇章 › 同行評審

2 引文斯高帕斯（Scopus）

Eliminating whirl occurrence in fluid-film bearings of rotary machinery through optimally controlled anti-swirl injection

Le, D. D., Tsuei, C. K. & Pan, M. C., 2014, Active and Passive Smart Structures and Integrated Systems 2014. SPIE, 905736. (Proceedings of SPIE - The International Society for Optical Engineering; 卷 9057).

研究成果: 書貢獻/報告類型 › 會議論文篇章 › 同行評審

Enhancement of bonding strength for low temperature Si3N4/Si3N4 direct wafer bonding by nitrogen-plasma activation and hydrofluoric pre-dip

Lo, F. S., Chiang, C. C., Li, C. & Lee, T. H., 2014, Semiconductor Wafer Bonding 13: Science, Technology, and Applications. Suga, T., Goorsky, M. S., Knechtel, R., Moriceau, H., Baumgart, H., Tan, C. S. & Hobart, K. D. (編輯). 5 編輯 Electrochemical Society Inc., p. 111-117 7 p. (ECS Transactions; 卷 64, 編號 5).

研究成果: 書貢獻/報告類型 › 會議論文篇章 › 同行評審

Fast image matching using multi-level texture descriptor

Ng, H. F., Lin, C. Y. & Muindisi, T., 12 2月 2014, 2014 Asia-Pacific Signal and Information Processing Association Annual Summit and Conference, APSIPA 2014. Institute of Electrical and Electronics Engineers Inc., 7041672. (2014 Asia-Pacific Signal and Information Processing Association Annual Summit and Conference, APSIPA 2014).

研究成果: 書貢獻/報告類型 › 會議論文篇章 › 同行評審

Grabcut-based abandoned object detection

Muchtar, K., Lin, C. Y. & Yeh, C. H., 14 11月 2014, 2014 IEEE International Workshop on Multimedia Signal Processing, MMSP 2014. Institute of Electrical and Electronics Engineers Inc., 6958806. (2014 IEEE International Workshop on Multimedia Signal Processing, MMSP 2014).

研究成果: 書貢獻/報告類型 › 會議論文篇章 › 同行評審

3 引文斯高帕斯（Scopus）

Growth of hydrogenated microcrystalline silicon thin films using electron cyclotron resonance chemical deposition method

Chang, T. H., Chu, Y. H., Lee, C. C., Chang, J. Y., Li, T. T. & Chen, I. C., 2014, Proceedings of AM-FPD 2014 - The 21st International Workshop on Active-Matrix Flatpanel Displays and Devices: TFT Technologies and FPD Materials. IEEE Computer Society, p. 237-240 4 p. 6867180. (Proceedings of AM-FPD 2014 - The 21st International Workshop on Active-Matrix Flatpanel Displays and Devices: TFT Technologies and FPD Materials).

研究成果: 書貢獻/報告類型 › 會議論文篇章 › 同行評審

Investigation of a-Si:H films passivation quality by ECRCVD and application of silicon heterojunction solar cells

Chu, Y. H., Lee, C. C., Chang, T. H., Hsieh, Y. L., Chang, J. Y., Li, T. & Chen, I. C., 2014, Proceedings of AM-FPD 2014 - The 21st International Workshop on Active-Matrix Flatpanel Displays and Devices: TFT Technologies and FPD Materials. IEEE Computer Society, p. 217-220 4 p. 6867175. (Proceedings of AM-FPD 2014 - The 21st International Workshop on Active-Matrix Flatpanel Displays and Devices: TFT Technologies and FPD Materials).

研究成果: 書貢獻/報告類型 › 會議論文篇章 › 同行評審

1 引文斯高帕斯（Scopus）

Optical-electrical-thermal effect on efficiency droop in large size light emitting diode chips

Chen, J. C., Hsiao, C. P. & Hwu, F. S., 25 11月 2014, Optics for Solar Energy, OSE 2014. Optical Society of America (OSA), (Optics for Solar Energy, OSE 2014).

研究成果: 書貢獻/報告類型 › 會議論文篇章 › 同行評審

Optical-electrical-thermal effect on efficiency droop in large size light emitting diode chips

Chen, J. C., Hsiao, C. P. & Hwu, F. S., 25 11月 2014, Optical Instrumentation for Energy and Environmental Applications, E2 2014. Optical Society of America, (Optical Instrumentation for Energy and Environmental Applications, E2 2014).

研究成果: 書貢獻/報告類型 › 會議論文篇章 › 同行評審

機械工程學系

研究成果

搜尋結果