Study of selective laser melting process for cubic models with various porosities

C. T. Pan; C. H. Lin; Y. S. Huang; S. Y. Chen; T. L. Yang; C. H. Ou; L. Y. Chen; J. C. Huang; D. Y. Lin; J. S.C. Jang; H. K. Lin

doi:10.1109/ICASI.2016.7539847

Study of selective laser melting process for cubic models with various porosities

C. T. Pan, C. H. Lin, Y. S. Huang, S. Y. Chen, T. L. Yang, C. H. Ou, L. Y. Chen, J. C. Huang, D. Y. Lin, J. S.C. Jang, H. K. Lin

Graduate Institute of Materials Science and Engineering

Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

Abstract

Additive manufacturing (AM) has the advantages of fabricating complex models for application. In this study, cube structure with various porosity is manufactured by AM of selective laser melting (SLM). CAD software is used to create the micro porosity of sample models from 60 %∼80 %. The models are printed by Ti-6Al-4V powders. The morphology of the printed porous structures are examined by OM and SEM. Results show that only minor geometric deviation between the designed CAD pattern and the printed samples.

Original language	English
Title of host publication	2016 International Conference on Applied System Innovation, IEEE ICASI 2016
Publisher	Institute of Electrical and Electronics Engineers Inc.
ISBN (Electronic)	9781467398886
DOIs	https://doi.org/10.1109/ICASI.2016.7539847
State	Published - 10 Aug 2016
Event	2016 International Conference on Applied System Innovation, IEEE ICASI 2016 - Ginowan City Okinawa, Japan Duration: 28 May 2016 → 1 Jun 2016

Publication series

Name	2016 International Conference on Applied System Innovation, IEEE ICASI 2016

Conference

Conference	2016 International Conference on Applied System Innovation, IEEE ICASI 2016
Country/Territory	Japan
City	Ginowan City Okinawa
Period	28/05/16 → 1/06/16

Keywords

3D printing
Additive manufacturing
SLM
Ti-6Al-4V

Access to Document

10.1109/ICASI.2016.7539847

Cite this

Pan, C. T., Lin, C. H., Huang, Y. S., Chen, S. Y., Yang, T. L., Ou, C. H., Chen, L. Y., Huang, J. C., Lin, D. Y., Jang, J. S. C., & Lin, H. K. (2016). Study of selective laser melting process for cubic models with various porosities. In 2016 International Conference on Applied System Innovation, IEEE ICASI 2016 Article 7539847 (2016 International Conference on Applied System Innovation, IEEE ICASI 2016). Institute of Electrical and Electronics Engineers Inc.. https://doi.org/10.1109/ICASI.2016.7539847

@inproceedings{f01464e77f144830a94476b5a36e6d98,

title = "Study of selective laser melting process for cubic models with various porosities",

abstract = "Additive manufacturing (AM) has the advantages of fabricating complex models for application. In this study, cube structure with various porosity is manufactured by AM of selective laser melting (SLM). CAD software is used to create the micro porosity of sample models from 60 %∼80 %. The models are printed by Ti-6Al-4V powders. The morphology of the printed porous structures are examined by OM and SEM. Results show that only minor geometric deviation between the designed CAD pattern and the printed samples.",

keywords = "3D printing, Additive manufacturing, SLM, Ti-6Al-4V",

author = "Pan, {C. T.} and Lin, {C. H.} and Huang, {Y. S.} and Chen, {S. Y.} and Yang, {T. L.} and Ou, {C. H.} and Chen, {L. Y.} and Huang, {J. C.} and Lin, {D. Y.} and Jang, {J. S.C.} and Lin, {H. K.}",

note = "Publisher Copyright: {\textcopyright} 2016 IEEE.; 2016 International Conference on Applied System Innovation, IEEE ICASI 2016 ; Conference date: 28-05-2016 Through 01-06-2016",

year = "2016",

month = aug,

day = "10",

doi = "10.1109/ICASI.2016.7539847",

language = "???core.languages.en_GB???",

series = "2016 International Conference on Applied System Innovation, IEEE ICASI 2016",

publisher = "Institute of Electrical and Electronics Engineers Inc.",

booktitle = "2016 International Conference on Applied System Innovation, IEEE ICASI 2016",

}

Pan, CT, Lin, CH, Huang, YS, Chen, SY, Yang, TL, Ou, CH, Chen, LY, Huang, JC, Lin, DY, Jang, JSC & Lin, HK 2016, Study of selective laser melting process for cubic models with various porosities. in 2016 International Conference on Applied System Innovation, IEEE ICASI 2016., 7539847, 2016 International Conference on Applied System Innovation, IEEE ICASI 2016, Institute of Electrical and Electronics Engineers Inc., 2016 International Conference on Applied System Innovation, IEEE ICASI 2016, Ginowan City Okinawa, Japan, 28/05/16. https://doi.org/10.1109/ICASI.2016.7539847

Study of selective laser melting process for cubic models with various porosities. / Pan, C. T.; Lin, C. H.; Huang, Y. S. et al.
2016 International Conference on Applied System Innovation, IEEE ICASI 2016. Institute of Electrical and Electronics Engineers Inc., 2016. 7539847 (2016 International Conference on Applied System Innovation, IEEE ICASI 2016).

Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

TY - GEN

T1 - Study of selective laser melting process for cubic models with various porosities

AU - Pan, C. T.

AU - Lin, C. H.

AU - Huang, Y. S.

AU - Chen, S. Y.

AU - Yang, T. L.

AU - Ou, C. H.

AU - Chen, L. Y.

AU - Huang, J. C.

AU - Lin, D. Y.

AU - Jang, J. S.C.

AU - Lin, H. K.

PY - 2016/8/10

Y1 - 2016/8/10

N2 - Additive manufacturing (AM) has the advantages of fabricating complex models for application. In this study, cube structure with various porosity is manufactured by AM of selective laser melting (SLM). CAD software is used to create the micro porosity of sample models from 60 %∼80 %. The models are printed by Ti-6Al-4V powders. The morphology of the printed porous structures are examined by OM and SEM. Results show that only minor geometric deviation between the designed CAD pattern and the printed samples.

AB - Additive manufacturing (AM) has the advantages of fabricating complex models for application. In this study, cube structure with various porosity is manufactured by AM of selective laser melting (SLM). CAD software is used to create the micro porosity of sample models from 60 %∼80 %. The models are printed by Ti-6Al-4V powders. The morphology of the printed porous structures are examined by OM and SEM. Results show that only minor geometric deviation between the designed CAD pattern and the printed samples.

KW - 3D printing

KW - Additive manufacturing

KW - SLM

KW - Ti-6Al-4V

UR - http://www.scopus.com/inward/record.url?scp=84988516650&partnerID=8YFLogxK

U2 - 10.1109/ICASI.2016.7539847

DO - 10.1109/ICASI.2016.7539847

M3 - 會議論文篇章

AN - SCOPUS:84988516650

T3 - 2016 International Conference on Applied System Innovation, IEEE ICASI 2016

BT - 2016 International Conference on Applied System Innovation, IEEE ICASI 2016

PB - Institute of Electrical and Electronics Engineers Inc.

T2 - 2016 International Conference on Applied System Innovation, IEEE ICASI 2016

Y2 - 28 May 2016 through 1 June 2016

ER -

Pan CT, Lin CH, Huang YS, Chen SY, Yang TL, Ou CH et al. Study of selective laser melting process for cubic models with various porosities. In 2016 International Conference on Applied System Innovation, IEEE ICASI 2016. Institute of Electrical and Electronics Engineers Inc. 2016. 7539847. (2016 International Conference on Applied System Innovation, IEEE ICASI 2016). doi: 10.1109/ICASI.2016.7539847

Study of selective laser melting process for cubic models with various porosities

Abstract

Publication series

Conference

Keywords

Access to Document

Fingerprint

Cite this