Multiple performance objective design for a sliding isolator with variable curvature

Lyan Ywan Lu, Natalia Nur Ramadhanti, Tzu Ying Lee

Research output: Contribution to journalArticlepeer-review

Abstract

Thanks to its variable mechanical properties, the sliding isolator with variable curvature (SIVC) has recently attracted significant attention in seismic isolation research. Nevertheless, designing an SIVC is a challenging task, as it usually involves more design parameters than a conventional sliding isolator. To expedite the application of SIVCs, this study proposes a systematic design method that enables SIVCs to achieve multiple performance objectives corresponding to dual earthquake levels. The method comprises linear and nonlinear design stages. During the linear design stage, the linearized isolator parameters that comply with the design-basis-earthquake (DBE) and maximum-considered-earthquake (MCE) seismic demands specified in a design code are determined. Subsequently, in the nonlinear design stage, the isolator geometric parameters are determined based on the linearized parameters. While the linear design procedure is generic and applicable to all types of SIVCs, the derived formulas for determining the isolator geometric parameters in the nonlinear design stage are tailored for the polynomial friction pendulum isolator (PFPI). Finally, the proposed method is demonstrated by implementing a PFPI design for a 5-story reinforced-concrete (RC) building. The effectiveness of the proposed design method is validated through dynamic analysis of a hysteretic structural model representing the RC building with two different types of PFPIs subjected to 23 spectrum-compatible ground motions. The results demonstrate that, despite their different mechanical features, both types of PFPIs can accomplish the “preset” DBE and MCE design objectives. Additionally, the simulated results highlight the advantages of using different types of PFPIs.

Original languageEnglish
Article number117815
JournalEngineering Structures
Volume307
DOIs
StatePublished - 15 May 2024

Keywords

  • Advanced sliding isolator
  • Isolator design
  • Multiple performance objectives
  • Performance-based design
  • Polynomial friction pendulum isolator
  • Variable curvature

Fingerprint

Dive into the research topics of 'Multiple performance objective design for a sliding isolator with variable curvature'. Together they form a unique fingerprint.

Cite this