Multi-band slot antenna design using branch edge

Chichang Hung; Hungchen Chen; Tayeh Lin; Tsenchieh Chiu

doi:10.1109/APS.2014.6904829

Multi-band slot antenna design using branch edge

Chichang Hung, Hungchen Chen, Tayeh Lin, Tsenchieh Chiu

Department of Electrical Engineering

Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

Abstract

A design of multi-band antenna using a single slot with branch edge is presented in this paper. The antenna is employed at the edge of the printed circuit board and loaded with circuit components. With the folded slot and circuit components, the antenna area has been miniaturized within 1/16 λ. The slot antenna is decomposed into several sub-networks, and the corresponding equivalent circuit is presented. The design equation can be acquired from the equivalent circuit by using the resonant condition. A dual-band design is realized, measured, and validated at 1.575 GHz and 2.45 GHz, respectively. The design procedure of the antenna can be extended into multi-band design.

Original language	English
Title of host publication	2014 IEEE Antennas and Propagation Society International Symposium(APSURSI)
Publisher	Institute of Electrical and Electronics Engineers Inc.
Pages	1003-1004
Number of pages	2
ISBN (Electronic)	9781479935406
DOIs	https://doi.org/10.1109/APS.2014.6904829
State	Published - 18 Sep 2014
Event	2014 IEEE Antennas and Propagation Society International Symposium, APSURSI 2014 - Memphis, United States Duration: 6 Jul 2014 → 11 Jul 2014

Publication series

Name	IEEE Antennas and Propagation Society, AP-S International Symposium (Digest)
ISSN (Print)	1522-3965

Conference

Conference	2014 IEEE Antennas and Propagation Society International Symposium, APSURSI 2014
Country/Territory	United States
City	Memphis
Period	6/07/14 → 11/07/14

Access to Document

10.1109/APS.2014.6904829

Cite this

Hung, C., Chen, H., Lin, T., & Chiu, T. (2014). Multi-band slot antenna design using branch edge. In 2014 IEEE Antennas and Propagation Society International Symposium(APSURSI) (pp. 1003-1004). Article 6904829 (IEEE Antennas and Propagation Society, AP-S International Symposium (Digest)). Institute of Electrical and Electronics Engineers Inc.. https://doi.org/10.1109/APS.2014.6904829

@inproceedings{3a938ebc8f054c6aa3de9438a2c4b9b9,

title = "Multi-band slot antenna design using branch edge",

abstract = "A design of multi-band antenna using a single slot with branch edge is presented in this paper. The antenna is employed at the edge of the printed circuit board and loaded with circuit components. With the folded slot and circuit components, the antenna area has been miniaturized within 1/16 λ. The slot antenna is decomposed into several sub-networks, and the corresponding equivalent circuit is presented. The design equation can be acquired from the equivalent circuit by using the resonant condition. A dual-band design is realized, measured, and validated at 1.575 GHz and 2.45 GHz, respectively. The design procedure of the antenna can be extended into multi-band design.",

author = "Chichang Hung and Hungchen Chen and Tayeh Lin and Tsenchieh Chiu",

note = "Publisher Copyright: {\textcopyright} 2014 IEEE.; 2014 IEEE Antennas and Propagation Society International Symposium, APSURSI 2014 ; Conference date: 06-07-2014 Through 11-07-2014",

year = "2014",

month = sep,

day = "18",

doi = "10.1109/APS.2014.6904829",

language = "???core.languages.en_GB???",

series = "IEEE Antennas and Propagation Society, AP-S International Symposium (Digest)",

publisher = "Institute of Electrical and Electronics Engineers Inc.",

pages = "1003--1004",

booktitle = "2014 IEEE Antennas and Propagation Society International Symposium(APSURSI)",

}

Hung, C, Chen, H, Lin, T & Chiu, T 2014, Multi-band slot antenna design using branch edge. in 2014 IEEE Antennas and Propagation Society International Symposium(APSURSI)., 6904829, IEEE Antennas and Propagation Society, AP-S International Symposium (Digest), Institute of Electrical and Electronics Engineers Inc., pp. 1003-1004, 2014 IEEE Antennas and Propagation Society International Symposium, APSURSI 2014, Memphis, United States, 6/07/14. https://doi.org/10.1109/APS.2014.6904829

Multi-band slot antenna design using branch edge. / Hung, Chichang; Chen, Hungchen; Lin, Tayeh et al.
2014 IEEE Antennas and Propagation Society International Symposium(APSURSI). Institute of Electrical and Electronics Engineers Inc., 2014. p. 1003-1004 6904829 (IEEE Antennas and Propagation Society, AP-S International Symposium (Digest)).

Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

TY - GEN

T1 - Multi-band slot antenna design using branch edge

AU - Hung, Chichang

AU - Chen, Hungchen

AU - Lin, Tayeh

AU - Chiu, Tsenchieh

PY - 2014/9/18

Y1 - 2014/9/18

N2 - A design of multi-band antenna using a single slot with branch edge is presented in this paper. The antenna is employed at the edge of the printed circuit board and loaded with circuit components. With the folded slot and circuit components, the antenna area has been miniaturized within 1/16 λ. The slot antenna is decomposed into several sub-networks, and the corresponding equivalent circuit is presented. The design equation can be acquired from the equivalent circuit by using the resonant condition. A dual-band design is realized, measured, and validated at 1.575 GHz and 2.45 GHz, respectively. The design procedure of the antenna can be extended into multi-band design.

AB - A design of multi-band antenna using a single slot with branch edge is presented in this paper. The antenna is employed at the edge of the printed circuit board and loaded with circuit components. With the folded slot and circuit components, the antenna area has been miniaturized within 1/16 λ. The slot antenna is decomposed into several sub-networks, and the corresponding equivalent circuit is presented. The design equation can be acquired from the equivalent circuit by using the resonant condition. A dual-band design is realized, measured, and validated at 1.575 GHz and 2.45 GHz, respectively. The design procedure of the antenna can be extended into multi-band design.

UR - http://www.scopus.com/inward/record.url?scp=84907880018&partnerID=8YFLogxK

U2 - 10.1109/APS.2014.6904829

DO - 10.1109/APS.2014.6904829

M3 - 會議論文篇章

AN - SCOPUS:84907880018

T3 - IEEE Antennas and Propagation Society, AP-S International Symposium (Digest)

SP - 1003

EP - 1004

BT - 2014 IEEE Antennas and Propagation Society International Symposium(APSURSI)

PB - Institute of Electrical and Electronics Engineers Inc.

T2 - 2014 IEEE Antennas and Propagation Society International Symposium, APSURSI 2014

Y2 - 6 July 2014 through 11 July 2014

ER -

Multi-band slot antenna design using branch edge

Abstract

Publication series

Conference

Access to Document

Fingerprint

Cite this