Low-operation voltage of InGaN/GaN light-emitting diodes with Si-doped In0.3Ga0.7N/GaN short-period superlattice tunnelling contact layer

J. K. Sheu, J. M. Tsai, S. C. Shei, W. C. Lai, T. C. Wen, C. H. Kou, Y. K. Su, S. J. Chang, G. C. Chi

Research output: Contribution to journalArticlepeer-review

132 Scopus citations

Abstract

InGaN/GaN multiple-quantum-well light-emitting diode (LED) structures including a Si-doped In0.23Ga0.77N/GaN short-period superlattice (SPS) tunnelling contact layer were grown by metalorganic vapour phase epitaxy. The In0.23Ga0.77N/GaN(n+)-GaN(p) tunnelling junction, which the low-resistivity n+-In0.3Ga0.7N/GaN SPS instead of high-resistivity p-type GaN as a top contact layer, allows the reverse-biased tunnel junction to form a "ohmic" contact. In this structure, the sheet electron concentration of Si-doped In0.23Ga0.77N/GaN SPS is around 1 × 1014/cm2, leading to an averaged electron concentration of around 1 × 1020/cm3. This high-conductivity SPS would lead to a low-resistivity ohmic contact (Au/Ni/SPS) of LED. Experimental results indicate that the LEDs can achieve a lower operation voltage of around 2.95 V, i.e., smaller than conventional devices which have an operation voltage of about 3.8 V.

Original languageEnglish
Pages (from-to)460-462
Number of pages3
JournalIEEE Electron Device Letters
Volume22
Issue number10
DOIs
StatePublished - Oct 2001

Keywords

  • InGaN
  • Light-emitting diode
  • Short-period superlattices
  • Tunnelling junction

Fingerprint

Dive into the research topics of 'Low-operation voltage of InGaN/GaN light-emitting diodes with Si-doped In0.3Ga0.7N/GaN short-period superlattice tunnelling contact layer'. Together they form a unique fingerprint.

Cite this