Improving seismic performance of framed structures with steel curved dampers

H. L. Hsu, H. Halim

Research output: Contribution to journalArticlepeer-review

103 Scopus citations

Abstract

Moment resisting frames possess significant ductility and thus are commonly used in earthquake-resistant designs. However, excessive deformation due to lower stiffness and structural strength limits the applicability of this system. Steel curved dampers are proposed in this study to improve this system's structural performance. The curved dampers were laser-cut from steel plates with the desired geometries and placed at the beam to column regions. The damper behavior is governed by its length and angle between the two ends. A series of cyclic loading tests were performed on steel frames with various curved damper placements to evaluate the curved damper effect on the structural performance. It was found from the test results that the frame strength was higher when the damper angle was smaller. It was also observed from test result comparisons that significant improvements in strength, stiffness and energy dissipation were achieved when the proposed curved dampers were added to the moment resisting frames. Information obtained from this preliminary investigation will be used as data for comparisons in further study of dynamic behavior of multi-story framed structures.

Original languageEnglish
Pages (from-to)99-111
Number of pages13
JournalEngineering Structures
Volume130
DOIs
StatePublished - 1 Jan 2017

Keywords

  • Energy dissipation
  • Seismic performance
  • Semi-rigid frames
  • Steel curved dampers

Fingerprint

Dive into the research topics of 'Improving seismic performance of framed structures with steel curved dampers'. Together they form a unique fingerprint.

Cite this