TY - JOUR
T1 - Geological controls on BSR occurrences in the incipient arc-continent collision zone off southwest Taiwan
AU - Lin, Che Chuan
AU - Tien-Shun Lin, Andrew
AU - Liu, Char Shine
AU - Chen, Guan Yu
AU - Liao, Wei Zhi
AU - Schnurle, Philippe
N1 - Funding Information:
We thank the captain and crew of the R/V Ocean Researcher I for their support in collecting the seismic data used in this study. We are grateful to George Spence and one anonymous reviewer for their constructive comments, which have greatly improved the quality of this paper. This study is supported by Central Geological Survey, Ministry of Economic Affairs, Taiwan, under grants of 5226902000-06-93-01, 5226902000-05-94-01, and 5226902000-05-95-01.
PY - 2009/8
Y1 - 2009/8
N2 - Bottom simulating reflectors (BSRs) observed on seismic sections are often considered as indicators for the existence of free gas, delineating the base of the gas hydrate stability zone. Abundant BSRs seen on seismic sections acquired off the SW coast of Taiwan indicate the likely and prevalent existence of gas hydrates in the study area. This study aims to characterize the occurrence of BSRs off SW Taiwan and to understand their relationship to topography, tectonic activity, and possible migration paths of gas-bearing fluids in this area. The tectonic setting off SW Taiwan is during the initial stage of arc-continent collision between the Luzon arc and the northeastern continental margin of the South China Sea. A series of west-vergent, imbricated folds and emergent thrusts develop in the accretionary wedge. Each fold-and-thrust sequence corresponds to an elongated submarine ridge if its crest is not buried by flat-lying sediments. By contrast, normal faulting prevails in the northeastern margin of the South China Sea. A correlation between distribution of BSRs, topography, and tectonic features can be observed. Four major occurrences of BSR types of ridge type, basin type, submarine-canyon type, and continental slope type, are recognized on the basis of the relationship of BSRs to topographic and structural features. Main characteristics of BSRs in the study area can be described as: (1) they occur mostly beneath topographic highs; (2) a discordant relationship between surfaces of the seafloor and underlying strata where BSRs are present; (3) BSRs are prevalent especially beneath the crest and flank of the upthrusting, large and inclined slope basins; and (4) in general, a series of high-amplitude dipping reflectors beneath BSRs can be found. These features indicate that gas hydrate may accumulate preferably beneath topographic ridges especially underneath four-way-dip topographic closures. This effect may exist because the buoyancy-driven, gas-bearing fluids tend to migrate upward and laterally toward structural highs and their corresponding topographic ridges. The distribution of BSRs indicates that gas hydrates occur more commonly in the accretionary wedge than in the South China continental margin. We suggest that the more widespread occurrence of gas hydrates in the accretionary wedge is due to the existence of multiple fault zones, which may help to tap more deep-seated gas-bearing fluids, in addition to the shallow biogenic gas, in this region.
AB - Bottom simulating reflectors (BSRs) observed on seismic sections are often considered as indicators for the existence of free gas, delineating the base of the gas hydrate stability zone. Abundant BSRs seen on seismic sections acquired off the SW coast of Taiwan indicate the likely and prevalent existence of gas hydrates in the study area. This study aims to characterize the occurrence of BSRs off SW Taiwan and to understand their relationship to topography, tectonic activity, and possible migration paths of gas-bearing fluids in this area. The tectonic setting off SW Taiwan is during the initial stage of arc-continent collision between the Luzon arc and the northeastern continental margin of the South China Sea. A series of west-vergent, imbricated folds and emergent thrusts develop in the accretionary wedge. Each fold-and-thrust sequence corresponds to an elongated submarine ridge if its crest is not buried by flat-lying sediments. By contrast, normal faulting prevails in the northeastern margin of the South China Sea. A correlation between distribution of BSRs, topography, and tectonic features can be observed. Four major occurrences of BSR types of ridge type, basin type, submarine-canyon type, and continental slope type, are recognized on the basis of the relationship of BSRs to topographic and structural features. Main characteristics of BSRs in the study area can be described as: (1) they occur mostly beneath topographic highs; (2) a discordant relationship between surfaces of the seafloor and underlying strata where BSRs are present; (3) BSRs are prevalent especially beneath the crest and flank of the upthrusting, large and inclined slope basins; and (4) in general, a series of high-amplitude dipping reflectors beneath BSRs can be found. These features indicate that gas hydrate may accumulate preferably beneath topographic ridges especially underneath four-way-dip topographic closures. This effect may exist because the buoyancy-driven, gas-bearing fluids tend to migrate upward and laterally toward structural highs and their corresponding topographic ridges. The distribution of BSRs indicates that gas hydrates occur more commonly in the accretionary wedge than in the South China continental margin. We suggest that the more widespread occurrence of gas hydrates in the accretionary wedge is due to the existence of multiple fault zones, which may help to tap more deep-seated gas-bearing fluids, in addition to the shallow biogenic gas, in this region.
KW - Bottom simulating reflectors
KW - Gas hydrates
KW - Offshore SW Taiwan
KW - Tectonic features
UR - http://www.scopus.com/inward/record.url?scp=67349083567&partnerID=8YFLogxK
U2 - 10.1016/j.marpetgeo.2008.11.002
DO - 10.1016/j.marpetgeo.2008.11.002
M3 - 期刊論文
AN - SCOPUS:67349083567
SN - 0264-8172
VL - 26
SP - 1118
EP - 1131
JO - Marine and Petroleum Geology
JF - Marine and Petroleum Geology
IS - 7
ER -