Effect of phosphoric acid and perchloric acid on Electropolishing of additive manufactured 17-4 PH stainless steel and its characterization

Chia Yu Lee; Ming Der Ger; Jung Chou Hung; Po Jen Yang; Yi Cherng Ferng; Kuo Kuang Jen; Shun Yi Jian

doi:10.20964/2022.03.21

Effect of phosphoric acid and perchloric acid on Electropolishing of additive manufactured 17-4 PH stainless steel and its characterization

Chia Yu Lee, Ming Der Ger, Jung Chou Hung, Po Jen Yang, Yi Cherng Ferng, Kuo Kuang Jen, Shun Yi Jian

Department of Mechanical Engineering

Research output: Contribution to journal › Article › peer-review

1 Scopus citations

Abstract

Additive manufactured 17-4 PH stainless steel is widely used and is the material for this study. The processing of the work piece for additive manufacturing is difficult and the surface is very rough. The surface roughness is reduced by electropolishing using phosphoric acid and perchloric acid solutions, in order to compare their efficiency. Surface morphology is determined using SEM. A 3D white light interferometer measures the surface roughness and electrochemical testing is used to determine corrosion resistance after electropolishing.

Original language	English
Article number	220315
Journal	International Journal of Electrochemical Science
Volume	17
DOIs	https://doi.org/10.20964/2022.03.21
State	Published - 2022

Keywords

17-4 PH stainless steel
Additive Manufacturing
Electropolishing
Surface roughness

Access to Document

10.20964/2022.03.21

Cite this

@article{4a65967d39c34f0a8308b1b57bddcd44,

title = "Effect of phosphoric acid and perchloric acid on Electropolishing of additive manufactured 17-4 PH stainless steel and its characterization",

abstract = "Additive manufactured 17-4 PH stainless steel is widely used and is the material for this study. The processing of the work piece for additive manufacturing is difficult and the surface is very rough. The surface roughness is reduced by electropolishing using phosphoric acid and perchloric acid solutions, in order to compare their efficiency. Surface morphology is determined using SEM. A 3D white light interferometer measures the surface roughness and electrochemical testing is used to determine corrosion resistance after electropolishing.",

keywords = "17-4 PH stainless steel, Additive Manufacturing, Electropolishing, Surface roughness",

author = "Lee, {Chia Yu} and Ger, {Ming Der} and Hung, {Jung Chou} and Yang, {Po Jen} and Ferng, {Yi Cherng} and Jen, {Kuo Kuang} and Jian, {Shun Yi}",

year = "2022",

doi = "10.20964/2022.03.21",

language = "???core.languages.en_GB???",

volume = "17",

journal = "International Journal of Electrochemical Science",

issn = "1452-3981",

}

TY - JOUR

T1 - Effect of phosphoric acid and perchloric acid on Electropolishing of additive manufactured 17-4 PH stainless steel and its characterization

AU - Lee, Chia Yu

AU - Ger, Ming Der

AU - Hung, Jung Chou

AU - Yang, Po Jen

AU - Ferng, Yi Cherng

AU - Jen, Kuo Kuang

AU - Jian, Shun Yi

PY - 2022

Y1 - 2022

N2 - Additive manufactured 17-4 PH stainless steel is widely used and is the material for this study. The processing of the work piece for additive manufacturing is difficult and the surface is very rough. The surface roughness is reduced by electropolishing using phosphoric acid and perchloric acid solutions, in order to compare their efficiency. Surface morphology is determined using SEM. A 3D white light interferometer measures the surface roughness and electrochemical testing is used to determine corrosion resistance after electropolishing.

AB - Additive manufactured 17-4 PH stainless steel is widely used and is the material for this study. The processing of the work piece for additive manufacturing is difficult and the surface is very rough. The surface roughness is reduced by electropolishing using phosphoric acid and perchloric acid solutions, in order to compare their efficiency. Surface morphology is determined using SEM. A 3D white light interferometer measures the surface roughness and electrochemical testing is used to determine corrosion resistance after electropolishing.

KW - 17-4 PH stainless steel

KW - Additive Manufacturing

KW - Electropolishing

KW - Surface roughness

UR - http://www.scopus.com/inward/record.url?scp=85124714546&partnerID=8YFLogxK

U2 - 10.20964/2022.03.21

DO - 10.20964/2022.03.21

M3 - 期刊論文

AN - SCOPUS:85124714546

SN - 1452-3981

VL - 17

JO - International Journal of Electrochemical Science

JF - International Journal of Electrochemical Science

M1 - 220315

ER -

Effect of phosphoric acid and perchloric acid on Electropolishing of additive manufactured 17-4 PH stainless steel and its characterization

Abstract

Keywords

Access to Document

Fingerprint

Cite this