Design and analysis for a 850 nm si photodiode using the body bias technique for low-voltage operation

Fang Ping Chou, Guan Yu Chen, Ching Wen Wang, Zi Ying Li, Yu Chang Liu, Wei Kuo Huang, Yue Ming Hsin

Research output: Contribution to journalArticlepeer-review

7 Scopus citations

Abstract

This study presents a design of the body contact in an 850 nm Si photodiode (PD) fabricated using standard 0.18-\murm m CMOS technology, and presents a systematic investigation of its effects on PD performance. This study confirms a good PD performance within 3 V bias and the establishment of the body current by directly measuring the body current, PD capacitance, and photocurrents. The body current from the biasing body contact was designed to eliminate the slow diffusion photocarriers in the substrate and increase bandwidth. The highest responsivity of 1.2 A/W was obtained from the PD without the body current, with biasing in the avalanche region. Adding the body bias increased the optimal bandwidth from 2.51 to 3.11 GHz, but reduced responsivity. However, the operating bias of the Si PD in the avalanche region was high, making it unsuitable for practical applications. While biasing PD at a low 3 V with a coordinated body bias, a bandwidth of 2.46 GHz was obtained with an acceptable responsivity of 0.1 A/W to allow low-voltage operation.

Original languageEnglish
Article number6417963
Pages (from-to)936-941
Number of pages6
JournalJournal of Lightwave Technology
Volume31
Issue number6
DOIs
StatePublished - 2013

Keywords

  • Avalanche photodiodes
  • CMOS ICs
  • PD
  • photo detectors
  • photodiodes

Fingerprint

Dive into the research topics of 'Design and analysis for a 850 nm si photodiode using the body bias technique for low-voltage operation'. Together they form a unique fingerprint.

Cite this