Graduate Institute of Materials Science and Engineering

Phone886-3-4227151 ext.34900
Email[email protected]

4 Not started
10 Active
74 Finished

50 - 74 out of 74 results

Filter

Finished

Effect of Mg, Zr Contents and Stabilization on the Corrosion and Mechanical Properties of 5xxx Series Aluminum Alloys(1/3)
Lee, S.-L. (PI)
1/08/17 → 31/07/18
Project: Research
雷射積層製造用鐵基金屬玻璃合金材料開發及其在光學模具應用之研究(1/3)
Jang, S.-C. (PI)
1/08/17 → 31/07/18
Project: Research
Platform for Simultaneous Low-Dimensional Thermoelectric and Optoelectronic Characterization: Identifying Holey Sige Nanoribbons
Lee, S.-W. (PI)
1/08/17 → 31/07/18
Project: Research
Pt-Based Catalysts for Low Temperature Fuel Cells: Computational Prediction and Experimental Validation(3/3)
Wang, K.-W. (PI)
1/08/17 → 31/07/18
Project: Research
Study on Electrochemical Fabrication (Plating and Micro-Electroplating) and Comparison of Thin-Film and Micro-Helix Structures of Cu-Based Shape Memory Alloys
Lin, J.-C. (PI)
1/08/17 → 31/10/18
Project: Research
Development of Cathode Material for Ammonia Solid Oxide Fuel Cell and Fabrication of Full Cells
Lin, J.-C. (PI)
1/08/17 → 31/10/18
Project: Research
開發圖案化熱壓製程與不同表面改質技術修飾之雙金屬氧化物光電極以提升分解水產氫之效能(1/3)
Hung, W.-H. (PI)
1/08/17 → 31/07/18
Project: Research
Development of the Open-Cell Toxic-Element-Free Ti-Based Bulk Metallic Glass Foams(2/3)
Jang, S.-C. (PI)
1/08/17 → 31/07/18
Project: Research
Development of Highly Tunable Plasmonic Nanostructures
Chen, I.-C. (PI)
1/08/17 → 31/07/18
Project: Research
Development of Si-Based and Ge-Based Nanostructured Thermoelectric Bulk Materials(1/3)
Lee, S.-W. (PI)
1/01/17 → 31/12/17
Project: Research
Development of Key Technologies for Proton-Conducting Solid Oxide Electrolyzer Cells( I )
Lee, S.-W. (PI)
1/01/17 → 31/12/17
Project: Research
3D列印孔洞漸層玻璃金屬之海綿骨置換體開發(3/3)
Jang, S.-C. (PI)
1/11/16 → 31/10/17
Project: Research
Development of the Open-Cell Toxic-Element-Free Ti-Based Bulk Metallic Glass Foams(1/3)
Jang, S.-C. (PI)
1/08/16 → 31/07/17
Project: Research
Pt-Based Catalysts for Low Temperature Fuel Cells: Computational Prediction and Experimental Validation(2/3)
Wang, K.-W. (PI)
1/08/16 → 31/07/17
Project: Research
On the Electrochemical Fabrication of 3-Dimensional Metal-(&Amp; Alloy-) Microstructures Coated with Functional Nano Oxides( III )
Lin, J.-C. (PI)
1/08/16 → 31/10/17
Project: Research
Plasmon-Enhanced Silicon Near-Infrared Photodetectors: Translating Fundamental Interface Design/Engineering to Enhance the Photoresponse
Chen, I.-C. (PI)
1/08/16 → 31/07/17
Project: Research
Developement of screen-printable polymer pastes for passivated emitter and rear cells
Chen, I.-C. (PI)
1/02/16 → 31/01/17
Project: Research
Development and design of materials, components and fabrication processes in IGFC for the utilization of CO2 and syngas( III )
Lin, J.-C. (PI)
1/01/16 → 28/02/17
Project: Research
3D列印孔洞漸層玻璃金屬之海綿骨置換體開發(2/3)
Jang, S.-C. (PI)
1/11/15 → 31/10/16
Project: Research
微量鈧與鋯對A357鋁矽鎂合金之微結構與機械性質之影響
Lee, S.-L. (PI)
1/11/15 → 31/10/16
Project: Research
以電化學法製造表面披覆有功能性奈米氧化物之三維金屬(與合金)微結構(2/3)
Lin, J.-C. (PI)
1/08/15 → 31/07/16
Project: Research
Pt-Based Catalysts for Low Temperature Fuel Cells: Computational Prediction and Experimental Validation(1/3)
Wang, K.-W. (PI)
1/08/15 → 31/07/16
Project: Research
IGFC關鍵材料/製程/零組件及二氧化碳再利用之技術開發(2/3)
Lin, J.-C. (PI)
1/01/15 → 31/12/15
Project: Research
高效能質子傳輸型固態氧化物燃料電池之關鍵電解質技術開發
Lee, S.-W. (PI)
1/01/15 → 31/12/15
Project: Research