Department of Mechanical Engineering

Finished

以類神經網路預測振動應力消除(VSR)之成效

Huang, Y.-M. (PI)

1/06/21 → 30/11/22

Project: Research

粉末冶金行星齒輪傳動機構產品系列規劃與分析(II) ‐ 產品系列設計專家系統建立

Tsai, S.-J. (PI)

1/06/21 → 31/05/22

Project: Research

Prediction of the effect of vibration stress relief by artificial neural network

Huang, Y.-M. (PI)

1/06/21 → 31/05/22

Project: Research

微創外科手術精密輪廓度刀具鍛造製程及模具開發

Fuh, Y.-K. (PI)

1/06/21 → 31/05/22

Project: Research

粉末冶金行星齒輪傳動機構產品系列規劃與分析(II)?產品系列設計專家系統建立

Tsai, S.-J. (PI)

1/06/21 → 31/08/22

Project: Research

理論解析和實驗量測平板結構附加質量陣列之振動特徵、暫態波傳與反算偵測研究(1/2)

Liao, C.-Y. (PI)

1/02/21 → 31/01/22

Project: Research

Strategic Planning on Research Developments of Energy Division(2/3)

Hsiau, S.-S. (PI)

1/01/21 → 31/12/21

Project: Research

110年度工研院委託陶瓷金屬製程開發

Jang, S.-C. (PI)

1/01/21 → 31/12/21

Project: Research

齒輪研磨程式開發

Chen, Y.-C. (PI)

1/12/20 → 31/08/22

Project: Research

Development of high performance high temperature proton exchange membrane fuel cell stack integrated with a heat-driven cooling system for commercial application

Tseng, C.-J. (PI)

1/11/20 → 31/10/21

Project: Research

開發商業高效能高溫質子交換膜燃料電池堆與熱回收製冷之整合系統

Tseng, C.-J. (PI)

1/11/20 → 31/10/21

Project: Research

Dynamic Balance Correction and Vibration Attenuation on Motor Reducers Containing Damping Particles

Wu, Y.-J. (PI)

1/11/20 → 31/10/21

Project: Research

重力驅動顆粒-流體兩相流場之理論與實驗研究(2/3)

Hsiau, S.-S. (PI)

1/09/20 → 31/08/21

Project: Research

Study of the Dynamics and Segregation Mechanism of Granular Materials(1/3)

Hsiau, S.-S. (PI)

1/08/20 → 31/07/21

Project: Research

Design of a Robotic Mechanism for Femur Reduction Surgery(2/2)

Essomba, A. T. (PI)

1/08/20 → 31/07/21

Project: Research

Development of Multi-Degree-Of-Freedom Displacements and Euler Angles Measurement Technology

Lee, J.-Y. (PI)

1/08/20 → 31/07/21

Project: Research

Fatigue Properties and Life Assessment of Nickel-Based Superalloy Inconel 718 Produced by Selective Laser Melting

Hwang, J.-R. (PI)

1/08/20 → 31/05/22

Project: Research

Orientation and Alignment of in Vi Tro Capillary Blood Plexus Using Fluid Shear Flow(3/3)

Chung, C.-A. (PI)

1/08/20 → 31/12/21

Project: Research

Development of Anode Materials for P-Sofc Application(3/3)

Tseng, C.-J. (PI)

1/08/20 → 31/07/21

Project: Research

Numerical Simulation of Gallium Oxide Crystals Grown by Czochralski Method(1/3)

Chen, J.-C. (PI)

1/08/20 → 31/07/21

Project: Research

Realization of Smart Factory with 5g Mobile Networks, Exemplified by Machining of Sapphire Substrate

Lin, C.-K. (PI)

1/08/20 → 31/07/21

Project: Research

應用問題與專案導向教學法於大學機械系學生自主學習之研究 (III) – 系課程架構規劃與團隊學習成效探討

Tsai, S.-J. (PI)

1/08/20 → 31/01/22

Project: Research

The Development of Assistive Devices

Tung, P.-C. (PI)

1/08/20 → 31/07/21

Project: Research

A Study on Vibration Reduction for Mechanism Systems with Damping Particles by Using Coupled Discrete Element Method and Multi-Body Dynamics: Experimental Validation and Engineering Application

Chung, Y.-C. (PI)

1/08/20 → 31/10/21

Project: Research

A Study on Generating Grinding Texture of Cylindrical Gear Tooth Surface Topological of Cylindrical Gears for Vi Bration and Noise Reduction(2/3)

Wu, Y.-J. (PI)

1/08/20 → 31/07/21

Project: Research

Development of Techniques for Laser Additive Manufacturing Mold in Metal Injection Molding (Mim) Using Fe-Based Metallic Glass Powder (Iv)

Ho, J.-R. (PI)

1/08/20 → 30/06/21

Project: Research

Development of Feature Optimization and Hole Simplification Technologies for Injection Mold in Mold Flow Analysis(2/2)

Lai, J.-Y. (PI)

1/08/20 → 31/07/21

Project: Research

以階段式電極結合USM與ECDM之陣列異型微孔加工研究

Hung, J.-C. (PI)

1/08/20 → 31/10/20

Project: Research

Study of the Discharge and Heat Transfer Behavior of Granular Flow in a Silo(2/3)

Hsiau, S.-S. (PI)

1/08/20 → 31/07/21

Project: Research

Bilinear Polynomial Fuzzy System Control

Lo, J.-C. (PI)

1/08/20 → 31/07/21

Project: Research

Clean Advanced Lean-Premixed Turbulent Combustion Science and Technology: Ignition Measurement and Analysis by Nanosecond Repetitively Pulsed Discharges(1/3)

Shy, S.-Y. (PI)

1/08/20 → 31/07/21

Project: Research

On the Computational Complexity of Sample Entropy and Its Edge Computing

Wang, Y.-H. (PI)

1/08/20 → 31/07/21

Project: Research

Mechanical Properties and Corrosion Resistance of Forged Aa7075 and Aa7005 Alloys

Shih, T.-S. (PI)

1/08/20 → 31/07/21

Project: Research

Syllabus of Information Technology and Life Technology Teacher Training and "Robot Technology" Science Popularization Promotion Program.

Jiang, S.-B. (PI)

1/08/20 → 31/07/21

Project: Research

Research on Charge-Accumulation Effect of Schottky Barrier on Electrochemistry to Develop the Technology of Anodizing N-Type Silicon in the Dark(2/2)

Lee, T.-H. (PI)

1/08/20 → 31/07/21

Project: Research

Integrating Selective Powder Deposition and Fused Depositon Modeling Technology to Improve Hydrophilicity of Peek Implants

Liao, C.-Y. (PI)

1/08/20 → 31/07/21

Project: Research

基於矽光子技術之快速多模組醫學檢測研發與應用--基於矽光子技術之快速多模組醫學檢測研發與應用(3/4)

Lee, T.-H. (PI)

1/08/20 → 31/07/21

Project: Research

Effect of the Process Parameters on the Mechanical Properties of Hinge Component Made of Superhard Alloy Powder Injection Molding(2/2)

Chung, C.-Y. (PI)

1/08/20 → 30/04/22

Project: Research

Manufacturing Technology and Cutter Design of Power Skiving for Internal Gears and Circular Splines

Chen, Y.-C. (PI)

1/08/20 → 31/10/21

Project: Research

Investigation on Erosion and Deposition Behavior of Debris Flow Transport Process with Numerical Simulation and Deep Learning Based Experimental Analysis Method(1/3)

Chou, S.-H. (PI)

1/08/20 → 31/07/21

Project: Research

Development of High Thermal Conductivity Thermal Interface Materials (Tims) with the Novel Percolation Nano-Structure and Application to Igbt Thermal Management(3/3)

Fuh, Y.-K. (PI)

1/08/20 → 31/07/21

Project: Research

The Development of Image Guided Localized Electrochemical Deposition (Lecd) Technique for Double Spiral Columns(2/2)

Hwang, Y.-R. (PI)

1/08/20 → 31/10/21

Project: Research

A Study on Applying Whirling Milling Method to Manufacture Screw Rotors for Vacuum Pumps(1/2)

Wu, Y.-J. (PI)

1/08/20 → 31/07/21

Project: Research

Study on Hybrid Diffuse Optical Imaging Technique and System Integration(1/2)

Pan, M.-C. (PI)

1/08/20 → 31/07/21

Project: Research

To Study, Implement and Validate an Inertial-Sensors Based Gait/Posture Analysis System for Lower Extremity Prosthesis Users

Pan, M.-C. (PI)

1/08/20 → 31/10/21

Project: Research

Study on the Contact Characteristics of High-Contact-Ratio Spur Gear Pairs with Flank-Modification under Dynamic Loading

Tsai, S.-J. (PI)

1/08/20 → 31/10/21

Project: Research

Development of Total-Internal-Reflection Polarization Interferometry for Refractive Index Measurement

Lee, J.-Y. (PI)

1/06/20 → 31/05/21

Project: Research

Development of Characterizing and Micromachining Technologies for Fabricating Quartz Crystal Unit( I )

Ho, J.-R. (PI)

1/06/20 → 31/05/21

Project: Research

Planning and Analysis of Product Family for Pm Planetary Gear Drives - Universal Model for Loaded Tooth Contact Analysis

Tsai, S.-J. (PI)

1/06/20 → 31/08/21

Project: Research

Development of Compound Fresnel Lenses for Infrared Sensors

Chen, C.-F. (PI)

1/06/20 → 31/08/21

Project: Research

Department of Mechanical Engineering

Projects

Search results