Department of Mechanical Engineering

Phone886-3-4227151 ext.34300
Emailncu4300@ncu.edu.tw
Websitehttps://www.me.ncu.edu.tw/en/

19 Not started
61 Active
308 Finished

100 - 150 out of 308 results

Filter

Finished
Development of Smart-Automation Laser Processing System with Iot-Based Machining-Integration Services( II )
Tung, P.
1/12/19 → 31/10/20
Project: Research
Design, Stress Analysis and Optimization of Novel Plastic Helical Gears Used in 90-Degree Crossing-Angle Transmission
Chen, Y.
1/11/19 → 31/10/20
Project: Research
Development of Aerospace Flow Sensor in Stress-Free Machining Electrode Modules
Lee, S.
1/11/19 → 31/10/20
Project: Research
Product Development of Medical Device by Precision Metal Forming and Mold Rationalization Analysis(Minimal Resist Stresss)
Fuh, Y.
1/11/19 → 31/10/20
Project: Research
重力驅動顆粒-流體兩相流場之理論與實驗研究(1/3)
Hsiau, S.
1/09/19 → 31/08/20
Project: Research
Industry Energy Saving and Application: New Combustion Technology and Feedback Control
Shy, S.
1/09/19 → 31/03/21
Project: Research
Development of Total-Internal-Reflection and Wavelength-Modulated Polarization Interferometry for Measurement of Refractive Index and Thickness.
Lee, J.
1/08/19 → 31/07/20
Project: Research
Mechanism Design and Control for the Wearable Training Apparatus(3/3)
Tung, P.
1/08/19 → 31/07/20
Project: Research
Development of an Intelligent Three-Dimensional Bio-Printer
Liao, C.
1/08/19 → 31/07/20
Project: Research
Process Optimization and Fatigue Properties of Nickel-Based Superalloy Inconel 718 Produced by Selective Laser Melting
Hwang, J.
1/08/19 → 31/05/21
Project: Research
The Relationship among Kinematics and Balance of Lower Extremity, Walking Ability and Functional Activities in Hemiparetic and Hemiplegic Patients (Ii)
Pan, M.
1/08/19 → 30/04/21
Project: Research
基於矽光子技術之快速多模組醫學檢測研發與應用--基於矽光子技術之快速多模組醫學檢測研發與應用(2/4)
Lee, T.
1/08/19 → 31/07/20
Project: Research
Development of High Thermal Conductivity Thermal Interface Materials (Tims) with the Novel Percolation Nano-Structure and Application to Igbt Thermal Management(2/3)
Fuh, Y.
1/08/19 → 31/07/20
Project: Research
Flow Behaviour of Metal Oxides in a Chemical Looping Reactor and Multi-Scale Exploration: Discrete Element Modelling, Quasi-3d Experimental Validation and Improvement of Flow Field(2/2)
Chung, Y.
1/08/19 → 31/10/20
Project: Research
Study and Design Optimization of Novel Harmonic Drive Ii(2/2)
Chen, Y.
1/08/19 → 31/10/20
Project: Research
Design of a Robotic Mechanism for Femur Reduction Surgery(1/2)
Essomba, T.
1/08/19 → 31/07/20
Project: Research
高敏度微流體質譜分析晶片應於新興毒品快篩之研究(1/2)
Tsao, C.
1/08/19 → 31/07/20
Project: Research
Development of Anode Materials for P-Sofc Application(2/3)
Tseng, C.
1/08/19 → 31/07/20
Project: Research
Effect of the Process Parameters on the Mechanical Properties of Hinge Component Made of Superhard Alloy Powder Injection Molding(1/2)
Chung, C.
1/08/19 → 31/07/20
Project: Research
A Study on Generating Grinding Texture of Cylindrical Gear Tooth Surface Topological of Cylindrical Gears for Vi Bration and Noise Reduction(1/3)
Wu, Y.
1/08/19 → 31/07/20
Project: Research
Study on the Design and Validation for Three-Dimensional Prostrate Optical Tomographical Imaging System(2/2)
Pan, M.
1/08/19 → 31/07/22
Project: Research
Numerical Simulation of Mocvd Reactor of Algan Chemical Specices Transport and Composition Distribution(3/3)
Chen, J.
1/08/19 → 31/07/20
Project: Research
Innovative Two Stage Gas Forming to Make Commercially Applicable Aluminum Shell Structures
Lee, S.
1/08/19 → 31/07/20
Project: Research
Orientation and Alignment of in Vi Tro Capillary Blood Plexus Using Fluid Shear Flow(2/3)
Chung, C.
1/08/19 → 31/07/20
Project: Research
The Relation between Locality and Mode-Mixing of the Empirical Mode Decomposition –The Theoretical Foundation and Its Applications
Wang, Y.
1/08/19 → 31/07/20
Project: Research
Hybridization of 3d Stacked Piezoelectric Nanofibers and Biomimetic-Textured Triboelectric Layers as Self-Powered Sensors for Developing the Large Scale Data Deep Learning Algorithms(1/3)
Fuh, Y.
1/08/19 → 31/07/20
Project: Research
Development of Green Electrochemical Discharge Machining (Ecdm) and Micro Hole Machining of Quartz Glass
Yan, B.
1/08/19 → 31/07/20
Project: Research
Design of a Robotic Mechanism for Newborn Intracranial Tele-Echography 2(2/2)
Essomba, T.
1/08/19 → 31/07/20
Project: Research
Study of the Discharge and Heat Transfer Behavior of Granular Flow in a Silo(1/3)
Hsiau, S.
1/08/19 → 31/07/20
Project: Research
A Study on Mechanical and Deformation Behaviours of 3d Printed Products by Using Discrete Element Modelling and Selective Laser Sintering Experiment(2/2)
Chung, Y.
1/08/19 → 31/10/20
Project: Research
Technical Development of Anodized High Strength Cast/Forged Aluminum Alloys(Al-Zn-Mg-Cu)- Mechanical Properties and Corrosion Resistance
Shih, T.
1/08/19 → 31/07/20
Project: Research
Development of Feature Optimization and Hole Simplification Technologies for Injection Mold in Mold Flow Analysis(1/2)
Lai, J.
1/08/19 → 31/07/20
Project: Research
Numerical Investigations of Impurity Transport Control during the Single Silicon Crystal Growth Process by Czochralski Method(2/2)
Chen, J.
1/08/19 → 31/07/20
Project: Research
The Development of Image Guided Localized Electrochemical Deposition (Lecd) Technique for Double Spiral Columns(1/2)
Hwang, Y.
1/08/19 → 31/07/20
Project: Research
High-Temperature Mechanical Durability of Sealing Joint in Metal-Supported Solid Oxide Fuel Cell(1/3)
Lin, C.
1/08/19 → 31/07/20
Project: Research
A Study of Vibration Reduction in a Gear-Bearing System with Particle Damper Based on Multi-Body Dynamics and Discrete Elemental Method(2/2)
Wu, Y.
1/08/19 → 31/07/20
Project: Research
Advanced Ammonia Sofc Full Cell Manufacture, Assembly and Testing and Its Conceptual Design for Portable Power Source(3/3)
Shy, S.
1/08/19 → 31/07/20
Project: Research
Study of the Thermal Mechanism of Granular Flow(3/3)
Hsiau, S.
1/08/19 → 31/10/20
Project: Research
Development of a Hybrid Micro-Generator for Harvesting Rotation Energy Ii
Chen, S.
1/08/19 → 31/10/20
Project: Research
Research on Charge-Accumulation Effect of Schottky Barrier on Electrochemistry to Develop the Technology of Anodizing N-Type Silicon in the Dark(1/2)
Lee, T.
1/08/19 → 31/07/20
Project: Research
Advanced Experimental Studies on High-Pressure, High-Temperature Premixed Turbulent Combustion(3/3)
Shy, S.
1/08/19 → 31/03/21
Project: Research
Application, Analysis and Validation of Pm Planetary Gear Drives with a High Gear Ratio (Ii)
Tsai, S.
1/06/19 → 30/09/20
Project: Research
Development of an Intelligent Vi Bration Stress Relief System
Huang, Y.
1/06/19 → 30/09/20
Project: Research
Optical Design and Verification of the Lens Type Led Surgical Light
Chen, C.
1/06/19 → 31/08/20
Project: Research
Study on the Development and Implementation of Fault Trouble Shooting System and Degradation Assessment Model for Li-Ion Battery Packs( II )
Pan, M.
1/06/19 → 31/08/20
Project: Research
Effect of Preheating Treatment on the Mechanical and Corrosion Properties of 512(Al-4.6mg-1.6si-0.8mn)Casting Alloys
Lee, S.
1/06/19 → 31/08/20
Project: Research
Development of Conformal Cooling Mold for Mim Parts by Integrating Mold Flow Analysis and Metal Additive Manufacturing
Lai, J.
1/06/19 → 31/05/20
Project: Research
Biomass Gasification with Super-Critical Cycle for Energy Supply System( I )
Hsiau, S.
1/04/19 → 31/03/20
Project: Research
Ultrasonic vibration-assisted EDM and electrophoretic polishing on Fe-based metallic glass(2/2)
Hsui, H.
1/04/19 → 30/06/20
Project: Research
Design, Analysis, and Investigation on High Speed Spur Gears ( II )
Chen, Y.
1/01/19 → 31/03/20
Project: Research